1. Киришүү
Thank you for choosing the SEBSON HF Motion Detector. This device is designed for indoor use, offering automatic light control based on motion detection. Its high-frequency sensor provides reliable detection within a 15-meter range and a 180° angle. Please read this manual carefully before installation and operation to ensure safe and correct use.
Сүрөт 1.1: Алдыңкы view of the SEBSON HF Motion Detector.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Electrical installations should only be carried out by qualified electricians. Improper installation can lead to electric shock, fire, or other hazards. Always disconnect power at the main circuit breaker before performing any electrical work.
- Орнотуудан же тейлөөдөн мурун электр менен жабдуу өчүрүлгөнүн текшериңиз.
- Do not exceed the maximum load capacity of the detector (600W for LED/energy-saving lamps, 1200W for incandescent bulbs).
- Бул продукт ички колдонуу үчүн гана иштелип чыккан. Нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
- Балдар жетпеген жерде сактаңыз.
- Do not attempt to modify or repair the device yourself. Contact qualified personnel for service.
3. Продукт бүтүп калдыview
The SEBSON HF Motion Detector is a recessed wall-mounted unit. It features adjustable settings for light sensitivity (LUX), detection sensitivity (SENS), and illumination duration (TIME).
3.1 Компоненттер
- Алдыңкы панели: Contains the HF sensor and a small indicator light.
- Арткы корпус: Houses the wiring terminals and adjustment dials.
- Жөнгө салуу терүүлөр: Three dials for LUX, SENS, and TIME settings.
- Иштөө режимин которуу: Allows selection between ON, OFF, and AUTO modes.
Сүрөт 3.1: Алдыңкы жана арткы views of the motion detector, showing adjustment dials and switch.
Image 3.2: Dimensional drawing of the motion detector (80x80x46mm).
4. Орнотуу
This motion detector is designed for recessed wall mounting in a 60mm flush-mounted box or 68mm cavity box.
4.1 Орнотууга чейинки текшерүү тизмеси
- Ensure the power supply to the installation area is completely disconnected.
- Verify that the chosen location is suitable for motion detection (e.g., not obstructed by large furniture).
- Confirm that the wall box dimensions are compatible (60mm flush-mounted or 68mm cavity box).
4.2 Электр кошуу схемасы (жалпы)
The detector requires a 3-wire connection. Connect the live wire (L), neutral wire (N), and the switched live wire (L') to the corresponding terminals on the back of the device. Refer to the markings on the device for correct connections.
Сүрөт 4.1: Арткы view of the detector, highlighting the wiring terminals.
4.3 Орнотуу кадамдары
- Негизги өчүргүчтөн кубатты өчүрүңүз.
- Carefully remove the existing switch or cover from the wall box.
- Connect the wires from the wall box to the corresponding terminals on the SEBSON motion detector.
- Mount the detector into the wall box, ensuring it is securely fastened.
- Алдыңкы панелди алмаштырыңыз.
- Restore power and test the device.
5. Operation & Settings
The motion detector has three adjustable settings and an operating mode switch.
Сүрөт 5.1: Детальдуу view of the LUX, SENS, and TIME adjustment dials.
5.1 Adjustment Dials
- LUX (Жарык сезгичтиги): Adjusts the ambient light threshold at which the sensor becomes active.
- ☀ (Sun icon): Detector is active in bright conditions (daylight).
- ☾ (Moon icon): Detector is active only in dark conditions (night).
- Range: 3 to 2000 LUX.
- SENS (Detection Sensitivity): Adjusts the sensitivity of the motion sensor.
- '+': Higher sensitivity, detects smaller movements or at greater distances.
- '-': Lower sensitivity, detects larger movements or at shorter distances.
- Range: 5 to 15 meters.
- TIME (Illumination Duration): Sets how long the light remains on after motion is detected and no further motion is sensed.
- Range: 10 seconds to 12 minutes.
5.2 Operating Mode Switch
Located on the rear housing, this switch allows you to select the operating mode:
- КҮЙҮК: The connected light remains continuously on, bypassing the motion sensor.
- ӨЧҮК: The connected light remains continuously off.
- АВТО: The motion detector operates according to the LUX, SENS, and TIME settings.
Image 5.2: Close-up of the ON/OFF/AUTO switch.
5.3 аныктоо диапазону
The HF sensor detects motion within a 180° angle and up to 15 meters, depending on the SENS setting and environmental factors. The optimal mounting height is between 1m and 1.8m.
Image 5.3: Detection range diagram.
6. Техникалык тейлөө
The SEBSON HF Motion Detector requires minimal maintenance.
- Тазалоодон мурун электр энергиясы өчүрүлгөнүн текшериңиз.
- Бетти жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Regularly check for any loose connections or damage. If damage is found, discontinue use and consult a qualified electrician.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кыймыл менен жарык жанбайт. |
|
|
| Жарык тынымсыз күйүп турат. |
|
|
| Жарык көрүнгөн кыймылсыз күйөт. |
|
|
8. Техникалык шарттар
| Бренд | SEBSON |
| Модель номери | HF_WAL_A |
| Продукциянын өлчөмдөрү (L x W x Y) | 8 x 4.6 x 8 см |
| Салмагы | 139 грамм |
| Материал | Пластик |
| Power Type | AC (өзгөрмө ток) |
| Тtage | 230 вольт |
| Max. Power (LED/Energy-saving) | 600 Ватт |
| Максималдуу кубаттуулук (Ысытуу лампасы) | 1200 Ватт |
| Тактоо диапазону | 5 - 15 Meters |
| Detection Angle | 180° |
| Light Sensitivity (LUX) | 3 - 2000 LUX (Adjustable) |
| Illumination Duration (TIME) | 10 seconds - 12 minutes (Adjustable) |
| Орнотуу түрү | Recessed wall mount |
| Сунушталган колдонуу | Indoor apartment, home security, lighting automation |
9. Кепилдик жана колдоо
SEBSON products are manufactured with high-quality standards. For warranty information or technical support, please refer to the purchase documentation or contact SEBSON customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official SEBSON webсайтка же сатуучуга кайрылыңыз.
