Introduction
This manual provides essential information for the installation, operation, and maintenance of the ESBE VTC422 DN25 Charging Valve. The VTC400 series is specifically designed for integration with buffer tanks in heating systems to ensure optimal performance and longevity.
Коопсуз жана туура колдонууну камсыз кылуу үчүн орнотуудан жана иштетүүдөн мурун бул колдонмону кылдат окуп чыгыңыз.
Продукт бүттүview
The ESBE VTC422 DN25 is a thermostatic charging valve designed to protect boilers from low return water temperatures. It ensures that the boiler reaches a high operating temperature quickly, which helps to prevent tarring and extends the boiler's lifespan. This model features a G 1" connector and operates within a temperature range of 50-70 °C.
1-сүрөт: ESBE VTC422 DN25 Charging Valve. This image shows the brass body of the valve with three threaded connections and a black plastic housing at the bottom containing the thermostatic element. The ESBE logo is visible on the side.
Коопсуздук нускамалары
- Always ensure the system is depressurized and cooled before attempting any installation or maintenance.
- Installation should be performed by a qualified professional in accordance with local regulations and standards.
- Орнотуу жана тейлөө учурунда тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
- Do not modify the valve or its components. Use only genuine ESBE spare parts.
- Агып кетүүлөрдүн алдын алуу үчүн бардык туташуулардын туура герметикалангандыгын текшериңиз.
Орнотуу жана орнотуу
Орнотууга чейинки текшерүүлөр
- Verify that the valve model (VTC422 DN25) and temperature range (50-70 °C) are suitable for your heating system and boiler.
- Inspect the valve for any visible damage before installation.
- Ensure all necessary tools and fittings (G 1" connectors) are available.
Орнотуу кадамдары
- Position the valve correctly in the heating circuit, typically on the return line to the boiler, before the buffer tank connection. Refer to the system's hydraulic diagram for precise placement.
- Connect the valve to the piping using appropriate G 1" fittings. Ensure connections are tight but do not overtighten.
- The valve has three ports: boiler return, buffer tank return, and boiler supply. Ensure correct flow direction as indicated on the valve body or in the system diagram.
- After installation, slowly fill the system and check for leaks at all connections.
- Bleed air from the system as per boiler manufacturer instructions.
Иштөө принциптери
The ESBE VTC422 DN25 is a thermostatic mixing valve that automatically regulates the temperature of the water returning to the boiler. When the boiler starts, the valve ensures that cold return water from the buffer tank is mixed with hot water from the boiler's flow, quickly raising the boiler's return temperature to the set point (50-70 °C). This prevents condensation and corrosion within the boiler.
Once the boiler reaches its operating temperature and the buffer tank is being charged, the valve gradually opens to allow more hot water from the boiler to flow into the buffer tank, while maintaining the minimum return temperature to the boiler.
Техникалык тейлөө
Үзгүлтүксүз текшерүүлөр
- Periodically inspect the valve and connections for any signs of leaks or corrosion.
- Ensure the system pressure is within the recommended range.
Тазалоо
The valve is generally maintenance-free. If blockages or performance issues occur due to sediment, the system should be flushed. For internal cleaning or replacement of thermostatic elements, it is recommended to consult a qualified technician.
Компонентти алмаштыруу
If the thermostatic element or other internal components require replacement, use only original ESBE spare parts. This procedure should be carried out by a trained professional.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Казандын кайтаруу температурасы өтө төмөн. | Valve not opening correctly, sediment buildup, incorrect installation. | Check system pressure, flush system, verify installation direction, consult technician. |
| Poor heat transfer to buffer tank. | Valve not opening fully, air in system, incorrect sizing. | Bleed air from system, verify valve operation, ensure correct valve sizing for application. |
| Байланыштарда агып кетет. | Loose fittings, damaged seals, incorrect thread sealant. | Tighten connections, replace seals, reapply thread sealant. |
For persistent issues, contact a qualified heating system technician or ESBE customer support.
Техникалык шарттар
- Модел: ESBE VTC422 DN25
- Бөлүмдүн номери: 51060600
- Бренд: ESBE
- Материал: Металл (жез)
- Туташуу түрү: G 1" (External Thread)
- Номиналдуу диаметри (DN): 25
- Температура диапазону: 50-70 °C
- Өлчөмдөрү (L x W x Y): 5.59 x 8.41 x 12.19 см (болжол менен 5.6 x 8.4 x 12.2 см)
- Салмагы: 771.11 грамм (болжол менен 1.7 фунт)
- Порттардын саны: 3
- Тышкы жасалгалоо: боёлгон
Кепилдик жана колдоо
For warranty information, please refer to the official ESBE website or contact your local ESBE distributor. Keep your proof of purchase for warranty claims.
For technical support, spare parts, or further assistance, please visit the official ESBE website or contact their customer service department. Contact details can typically be found on the ESBE official webсайт: www.esbe.eu
