WAC Lighting Aether 2in Round Light Engine Trim & LED Instruction Manual

1. Introduction and Overview

The WAC Lighting Aether 2in Round Light Engine Trim & LED is a high-performance recessed downlight designed for various indoor and outdoor applications. Its ultra-low profile design allows for installation in tight plenum spaces. This manual provides essential information for the safe installation, operation, and maintenance of your lighting fixture.

Негизги өзгөчөлүктөрү:

• Available in Round, Square, Flangeless Invisible, Adjustable, and Wall Wash configurations.
• Designed for use with New Construction Housings: HR-2LED-H13A or HR-2LED-H13AC.
• Өтө төмөн проfile design with a 2.5-inch housing height for 2-inch trims.
• Smooth and continuous dimming capability down to 1% with compatible dimmers (Electronic Low Voltage or 0-10V).
• High-powered, replaceable LED light engine with 2700K color temperature, 90 CRI, and 65,000 rated hours.

2. Коопсуздук маалыматы

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун сактагычтан же автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Бардык электр байланыштары жергиликтүү кодекстерге, буйруктарга же Улуттук электр кодексине (NEC) ылайык болушу керек. Эгер сиз электр зымдарын туура туташтырууну билбесеңиз, квалификациялуу электрик менен кеңешиңиз.
• камсыз кылуу voltagе лампалардын этикеткасынын маалыматы менен салыштыруу туура.
• Do not install in areas where the operating temperature exceeds the fixture's rated temperature.
• Арматураны эч кандай жол менен өзгөртпөңүз. Ар кандай өзгөртүүлөр кепилдикти жокко чыгарып, коопсуздук коркунучтарын жаратышы мүмкүн.
• Бул продукт буюмдун курулушу жана эксплуатациялоосу жана ага байланыштуу коркунучтар менен тааныш адам тарабынан орнотулушу керек.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• Instruction Manual
• Light fixture (Aether 2in Round Light Engine Trim & LED)
• Монтаждоочу жабдык

Image 3.1: WAC Lighting Aether 2in Round Light Engine Trim & LED. This image shows the complete recessed lighting trim with its black and white finish, ready for installation.

4. Орнотуу жана орнотуу

Баштоодон мурун:

• Автоматтык өчүргүчтөн же сактагыч кутучасынан электр кубатын өчүрүңүз.
• Ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.
• Confirm that the compatible new construction housing (HR-2LED-H13A or HR-2LED-H13AC) is already installed.

Этап-этабы менен орнотуу:

1. Турак жайды даярдоо: Ensure the power to the recessed housing is off. Remove any existing trim or components from the housing.
2. Зымдарды туташтыруу: Locate the wiring connector from the LED light engine. Connect it to the corresponding connector inside the recessed housing. Ensure a secure connection.
3. Insert Trim: Carefully push the Aether 2in Round Light Engine Trim into the recessed housing. The spring clips on the trim will engage with the housing to hold it securely in place. Apply gentle, even pressure until the trim is flush with the ceiling surface.
4. Коопсуз кыркуу: For some installations, additional mounting hardware may be used to further secure the trim. Refer to the specific instructions provided with your housing for details.
5. Күчтү калыбына келтирүү: Түзмөк бекем орнотулгандан кийин, автоматтык өчүргүчтөгү кубатты калыбына келтириңиз.
6. Сыноо функциясы: Turn on the light switch to verify proper operation and dimming capabilities.

Image 4.1: Dimensional drawing of the WAC Lighting Aether 2in Round Light Engine Trim. This diagram illustrates the physical measurements of the trim, including its 4 1/8 inch overall diameter and 2 5/8 inch aperture, crucial for proper installation planning.

5. Иштөө нускамалары

Стандарттык операция:

Once installed and power is restored, the Aether LED trim operates like any standard light fixture. Use your wall switch to turn the light on or off.

Караңгылоо функциясы:

This fixture is designed for smooth and continuous dimming down to 1% when used with compatible Electronic Low Voltage (ELV) or 0-10V dimmers. Ensure your dimmer switch is compatible with LED lighting and specifically with ELV or 0-10V systems for optimal performance. Refer to your dimmer's instruction manual for specific operating procedures.

6. Техникалык тейлөө

The WAC Lighting Aether LED trim requires minimal maintenance.

• Тазалоо: Жабдууларды тазалоо үчүн электр кубаты өчүрүлгөнүн текшериңиз. Жумшак, кургак же бир аз кургатылган чүпүрөктү колдонуңуз.amp Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар каптоого же электрдик компоненттерге зыян келтириши мүмкүн.
• LED Light Engine: The LED light engine is replaceable. If replacement is necessary, ensure power is off and follow the reverse of the installation steps to remove the old engine and install a new, compatible WAC Lighting LED light engine.
• Текшерүү: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.

7. Кыйынчылыктарды

If you experience issues with your Aether LED trim, refer to the following common problems and solutions:

8. Техникалык шарттар

9. Кепилдик маалыматы

This WAC Lighting product is covered by a 1477-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use and service. For specific terms, conditions, and claim procedures, please refer to the official WAC Lighting warranty documentation or contact customer support.

10. Кардарларды колдоо кызматы

For further assistance, technical support, or warranty inquiries, please visit the official WAC Lighting store or contact their customer service department.

WAC Lighting Store: Visit WAC Lighting on Amazon