Jaycar USB 3.0 Dual 2.5”/3.5” SATA HDD док станциясы XC4689 Колдонуучунун колдонмосу

1. Киришүү

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Jaycar USB 3.0 Dual 2.5”/3.5” SATA HDD Docking Station, Model XC4689. This device allows for easy connection of two 2.5-inch or 3.5-inch SATA hard drives or solid-state drives to your computer via USB 3.0, and features an offline cloning function for direct drive duplication without a computer.

2. Пакеттин мазмуну

• 1 x Jaycar USB 3.0 Dual SATA HDD Docking Station (XC4689)
• 1 x USB 3.0 маалымат кабели
• 1 х кубат адаптери
• 1 x User Manual

3. Продукциянын өзгөчөлүктөрү

• Supports two 2.5-inch or 3.5-inch SATA I/II/III HDDs/SSDs simultaneously.
• USB 3.0 interface for high-speed data transfer (up to 5Gbps), backward compatible with USB 2.0.
• Offline cloning function for direct drive-to-drive duplication without a computer.
• Hot-swappable capability for convenient drive changes.
• Plug and Play installation, no drivers required for most operating systems.
• Compatible with Windows and macOS operating systems.

4. Компонентти идентификациялоо

Familiarize yourself with the components of the docking station:

Сүрөт 1: Алдыңкы View док станциясынын. This image displays the front panel of the Jaycar USB 3.0 Dual SATA HDD Docking Station, showing the two drive bays at the top, and the control panel below. The control panel includes indicators for HDD 1 (Source) and HDD 2 (Target), cloning progress LEDs (100%, 75%, 50%, 25%), a 'CLONE' button, and a 'POWER' indicator with a power button.

• HDD 1 (Source) Slot: Upper slot for inserting the source hard drive during cloning, or a primary drive for data access.
• HDD 2 (Target) Slot: Lower slot for inserting the target hard drive during cloning, or a secondary drive for data access.
• HDD 1 (Source) Indicator: LED illuminates when HDD 1 is active.
• HDD 2 (Target) Indicator: LED illuminates when HDD 2 is active.
• Cloning Progress LEDs (25%, 50%, 75%, 100%): Indicate the progress of the offline cloning process.
• CLONE Button: Оффлайн клондоо процессин баштайт.
• КҮЧ баскычы: Док-станцияны күйгүзөт же өчүрөт.
• POWER көрсөткүчү: LED illuminates when the docking station is powered on.
• USB 3.0 Port (Rear): Connects the docking station to your computer via the supplied USB 3.0 cable.
• DC Power Input (Rear): Берилген кубат адаптерине туташат.

5. Орнотуу

1. Туташуу кубаты: Connect the power adapter to the DC Power Input port on the rear of the docking station, then plug the adapter into a power outlet.
2. Connect to Computer (Optional for Data Transfer): If using for data transfer, connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB port on your computer.
3. Катуу дисктерди киргизүү: Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into the desired drive slot(s) until it is firmly seated. Ensure the SATA connector aligns correctly.
4. Күйгүзүү: Press the POWER button on the front of the docking station. The POWER indicator LED will illuminate.
5. Дискти таануу: If connected to a computer, the operating system should automatically detect the drives. New drives may require initialization and formatting through Disk Management (Windows) or Disk Utility (macOS) before use.

6. Иштөө нускамалары

6.1. Data Transfer Mode

With the docking station connected to your computer via USB, inserted drives will appear as external storage devices. You can drag and drop files, perform backups, or access data as you would with any other external drive.

• Ensure the docking station is powered on and connected to your computer.
• Insert one or two SATA drives into the slots.
• The drives will be accessible through your computer's file изилдөөчү же тапкыч.
• Always safely eject drives from your operating system before removing them from the docking station or powering off the unit to prevent data loss.

6.2. Offline Cloning Function

The offline cloning function allows you to duplicate a source drive to a target drive without needing a computer connection. This is ideal for system upgrades or data backups.

1. Дисктерди даярдоо:
   • салыңыз Баштапкы диск (the drive you want to copy FROM) into the HDD 1 (Булак) уяча.
   • салыңыз Максаттуу Drive (the drive you want to copy TO) into the HDD 2 (Максат) уяча.
   • Маанилүү: The target drive's capacity must be equal to or greater than the source drive's capacity. All data on the target drive will be overwritten during the cloning process. Back up any important data on the target drive before proceeding.
2. USB ажыратыңыз: Ensure the USB cable is disconnected from the docking station and your computer. The cloning function operates independently.
3. Өчүрүү: Ensure the docking station is powered off.
4. Клондоону баштоо: басып, кармап туруңуз КЛОН баскычын, андан кийин басыңыз КҮЧ button. Continue holding the CLONE button until the cloning progress LEDs (25%, 50%, 75%, 100%) begin to flash.
5. Confirm Cloning: Release the CLONE button. Then, press the КЛОН button again to start the cloning process.
6. Прогресс мониторинги: The cloning progress LEDs will illuminate sequentially (25%, 50%, 75%, 100%) to indicate the completion percentage.
7. Клондоо аяктады: When all four progress LEDs (25%, 50%, 75%, 100%) are solid, the cloning process is complete.
8. Power Off and Remove Drives: Press the POWER button to turn off the docking station. Safely remove the cloned drives.

Эскертүү: Do not interrupt the cloning process once it has started, as this may lead to data corruption on both drives.

7. Техникалык тейлөө

• Док станциясын таза жана чаңсыз кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөк колдонуңуз.
• Аппаратты экстремалдык температурага, нымдуулукка же тике күн нуруна тийгизүүдөн сактаңыз.
• Агрегатты өз алдынча бөлүүгө же оңдоого аракет кылбаңыз. Квалификациялуу тейлөө кызматкерлерине кайрылыңыз.
• Иштеп жаткан учурда аппараттын айланасында туура желдетүүнү камсыз кылыңыз.

8. Кыйынчылыктарды

Problem: Drive not detected by computer.

• Ensure the docking station is powered on and the USB cable is securely connected to both the docking station and the computer.
• Компьютериңиздеги башка USB портуна туташып көрүңүз.
• Verify the hard drive is properly seated in the docking station slot.
• For new drives, check Disk Management (Windows) or Disk Utility (macOS) to ensure the drive is initialized and formatted.
• Test with a different hard drive to rule out drive failure.

Problem: Offline cloning fails or does not start.

• Ensure the USB cable is disconnected from the docking station.
• Verify the target drive's capacity is equal to or greater than the source drive's capacity.
• Ensure both drives are properly seated in their respective slots (Source in HDD 1, Target in HDD 2).
• Follow the cloning steps precisely: hold CLONE, press POWER, wait for LEDs to flash, release CLONE, then press CLONE again.
• Test both drives individually in data transfer mode to ensure they are functional.

Problem: Slow data transfer speeds.

• Компьютериңиздеги USB 3.0 портуна туташканыңызды текшериңиз. USB 2.0 порттору ылдамдыкты азайтат.
• Verify your hard drive is a SATA III drive for optimal performance.
• Other USB devices or system activity can affect transfer speeds.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase, or visit the official Jaycar website. For technical support, please contact Jaycar customer service or your local retailer.

Ар кандай кепилдик дооматтары үчүн сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.