Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PEDROLLO JSWm/2CX self-priming water pump. Please read these instructions carefully before installation or use and retain them for future reference.
1-сүрөт: PEDROLLO JSWm/2CX Self-Priming Water Pump. This image shows the blue-colored pump unit with its motor housing and pump body, designed for efficient water transfer.
Коопсуздук маалыматы
Насоско зыян келтирбөө же жаракат алуунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Ensure the pump is installed by a qualified professional.
- Кандайдыр бир техникалык тейлөө же тейлөө иштерин жүргүзүүдөн мурун электр кубатынан ажыратыңыз.
- Насосту тез күйүүчү же коррозияга дуушар кылуучу суюктуктар менен иштетпеңиз.
- Насосту нөл температурадан коргоңуз.
- Ensure proper grounding of the electrical connection.
Продукт бүттүview
The PEDROLLO JSWm/2CX is a self-priming centrifugal pump designed for reliable water transfer. It is suitable for pumping clean water and liquids that are not chemically aggressive to the pump's components. Its self-priming capability allows it to draw water even when air is present in the suction line, making it ideal for domestic water supply, small to medium autoclave tank systems, and garden irrigation.
Негизги өзгөчөлүктөрү:
- Self-priming design for efficient operation.
- Suitable for clean water and non-aggressive liquids.
- Robust construction with stainless steel components.
- Designed for continuous duty in domestic and garden applications.
Орнотуу жана орнотуу
Proper installation is crucial for the pump's performance and longevity. Consult a qualified technician for installation.
- Жайгашкан жери: Install the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Ensure adequate space for maintenance.
- Монтаждоо: Securely fasten the pump to a stable, level surface using appropriate bolts to minimize vibration.
- Түтүк:
- Use pipes of adequate diameter to minimize friction losses.
- Ensure all connections are airtight, especially on the suction side, to prevent air ingress.
- Таштандылардын насоско киришине жол бербөө жана анын жакшы абалын сактоо үчүн соргуч түтүктүн учуна чыпкасы бар бут клапанын орнотуңуз.
- Install a gate valve on both the suction and discharge sides for isolation during maintenance.
- Электр байланышы:
- Connect the pump to a suitable power supply (220-230V, 50Hz) as indicated on the motor's data plate.
- Ensure the electrical circuit is protected by a residual current device (RCD) and an appropriately rated circuit breaker.
- Verify proper grounding according to local electrical codes.
- Толуктоо: Before initial startup, completely fill the pump casing and the suction line with clean water through the priming port. This is essential for self-priming pumps to initiate operation.
Иштөө нускамалары
- Алгачкы ишке киргизүү: After installation and priming, open the discharge valve fully. Switch on the power supply. The pump should start and begin to draw water.
- Үзгүлтүксүз иштөө: Monitor the pump for unusual noises or vibrations. Ensure the pump is not running dry, as this can cause severe damage.
- Өчүрүү: To stop the pump, switch off the power supply. If the pump is part of an automatic system (e.g., with a pressure switch), it will start and stop automatically based on demand.
- Температуранын чектери:
- Liquid temperature: up to +40 °C.
- Ambient temperature: -10 °C to +40 °C.
Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана насостун иштөө мөөнөтүн узартат. Техникалык тейлөөдөн мурун ар дайым электр кубатынан ажыратыңыз.
- Үзгүлтүксүз текшерүүлөр: Inspect the pump and piping for leaks, corrosion, or damage.
- Сүзгүчтү тазалоо: Periodically clean the foot valve strainer to prevent blockages and maintain flow.
- Кыштоо: In areas prone to freezing, drain the pump completely and store it in a warm, dry place, or insulate it adequately to prevent damage from ice expansion.
- Мотор инспекциясы: Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | No power supply; Motor overload; Seized impeller. | Check power connection and circuit breaker; Reset thermal overload; Contact service technician. |
| Насос иштеп жатат, бирок суу берилбейт | Pump not primed; Air leak in suction line; Foot valve clogged; Suction lift too high. | Re-prime the pump; Check all suction connections for leaks; Clean foot valve strainer; Reduce suction lift if possible. |
| Reduced flow or pressure | Partial blockage in piping; Worn impeller; Air in system. | Inspect and clear piping; Contact service technician for impeller replacement; Bleed air from system. |
| Ашыкча ызы-чуу же титирөө | Cavitation (air in water); Loose mounting; Bearing wear. | Check for air leaks and ensure proper priming; Tighten mounting bolts; Contact service technician. |
Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | JSWm/2CX |
| Бренд | Педролло |
| Күч (HP) | 1 HP |
| Тtage / Frequency | 220-230V / 50Hz |
| Максималдуу агым ылдамдыгы | Мүнөтүнө 70 литр |
| Суюк температуранын диапазону | Up to +40 °C |
| Айлана-чөйрөнүн температурасы диапазону | -10 °Cден +40 °Cге чейин |
| Материал | Stainless Steel (pump body components) |
| ASIN | B07HMZ2DKQ |
| Эл аралык макала кодекси | 08052230012515 |
Note: The specification for "Power: 220 Watts" found in some product listings may refer to a specific component or a different metric. The pump's performance is rated at 1 HP.
Кепилдик жана колдоо
For warranty information, technical support, or spare parts, please contact your authorized Pedrollo dealer or visit the official Pedrollo webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Өндүрүүчү: PEDROLLO
