Ecolink FFZB1-ECO

Ecolink FFZB1-ECO Zigbee зымсыз сиреналык аудио детектор колдонуучусунун колдонмосу

Model: FFZB1-ECO

Introduction

Welcome to the user manual for the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector. This device is designed to enhance your home safety system by detecting the sound of existing UL-listed smoke detectors and relaying that information to your Zigbee hub.

Продукт бүттүview

The Ecolink FFZB1-ECO is a compact, battery-powered device that listens for the distinct siren pattern of a smoke detector. Upon detection, it transmits a signal to your compatible Zigbee hub, allowing for integration into your smart home system.

Фронт view of Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector

Image Description: A front view of the Ecolink FFZB1-ECO Zigbee Wireless Siren Audio Detector, a white, circular device with two horizontal slits and a small indicator light.

Негизги өзгөчөлүктөрү

Ecolink FFZB1-ECO features in a living room setting

Image Description: An image illustrating the Ecolink FFZB1-ECO device in a modern living room setting, highlighting its discreet design and integration into a smart home environment.

Бул кантип иштейт

The Ecolink FFZB1-ECO detector is positioned within hearing range of your existing UL-listed smoke detectors. When a smoke detector activates and emits its siren, the FFZB1-ECO recognizes this specific audio pattern. It then communicates this event wirelessly to your Zigbee hub, which can then trigger pre-configured actions, such as sending notifications to your smartphone or activating other smart home devices.

Ecolink FFZB1-ECO detecting smoke alarm sound

Image Description: A visual representation showing the Ecolink FFZB1-ECO device near a ceiling-mounted smoke detector, with smoke in the background, illustrating its function of detecting smoke alarm sounds.

Орнотуу жана орнотуу

Пакеттин мазмуну

Ecolink FFZB1-ECO product packaging

Image Description: The retail packaging for the Ecolink Firefighter Zigbee Wireless Audio Detector, showing the product name and brand logo.

Батарея орнотуу

The device comes with a CR123A battery pre-installed. To activate, ensure the battery tab is removed if present.

Zigbee Hub менен жупташуу

  1. Place your Zigbee hub into pairing mode. Refer to your hub's specific instructions for this process.
  2. On the Ecolink FFZB1-ECO, press and hold the pairing button (often located inside the battery compartment or a small pinhole) for approximately 3 seconds until the LED indicator begins to flash.
  3. The device should appear on your Zigbee hub's interface. Follow the on-screen prompts to complete the pairing process.
  4. Ийгиликтүү жупташтырылгандан кийин, LED индикатору жарк этүүнү токтотот.

Детекторду орнотуу

Choose a location within 6 inches of your existing smoke detector for optimal audio detection. Ensure the device is not obstructed.

Артка view of Ecolink FFZB1-ECO showing mounting holes

Image Description: The back view of the Ecolink FFZB1-ECO device, showing mounting holes and product identification labels including "Model: FFZB1-ECO" and "FCC ID: XQC-FFZB1".

Side view of Ecolink FFZB1-ECO

Сүрөттүн сүрөттөлүшү: Кошумча адисfile view of the Ecolink FFZB1-ECO device, illustrating its slim design and the "Slide to Remove" text on the casing.

Детекторду иштетүү

Кадимки операция

Once installed and paired, the Ecolink FFZB1-ECO operates passively, listening for smoke alarm sounds. The LED indicator will typically remain off during normal operation.

Ойготкучту аныктоо

When a smoke detector siren is detected, the FFZB1-ECO will transmit an alarm signal to your Zigbee hub. Your hub will then execute any configured automations, such as sending notifications or activating other smart devices.

Детекторду сыноо

It is recommended to test the detector periodically to ensure proper function.

  1. Activate your existing smoke detector's test button.
  2. Listen for the smoke detector's siren.
  3. Verify that your Zigbee hub receives the alarm signal from the FFZB1-ECO and triggers any associated actions (e.g., a notification on your smartphone).

Техникалык тейлөө

Батареяны алмаштыруу

The device uses one CR123A battery. When the battery level is low, your Zigbee hub should report a low battery status.

  1. Gently twist or slide the device off its mounting plate or remove it from the adhesive.
  2. Батарея отсегин ачыңыз.
  3. Remove the old CR123A battery and insert a new one, observing polarity.
  4. Reattach the device to its mounting location.
  5. Verify that the device reconnects to your Zigbee hub and reports a healthy battery status.

Тазалоо

Clean the device periodically with a soft, dry cloth. Avoid using liquid cleaners or solvents.

Проблемаларды чечүү

Түзмөк жупташтырылбай жатат

No Alarm Detection

False Alarms

Техникалык шарттар

ӨзгөчөлүкДеталь
МоделFFZB1-ЭКО
БрендEcolink
БайланышZigbee
Power Source1 x CR123A Battery (included)
Батареянын иштөө мөөнөтү5 жылга чейин
Өлчөмдөр10.4 x 8 x 4.2 дюйм (Продукт)
Элемент Салмагы1.09 унция (31 грамм)
ТүсАк
UPC0851166005039
FCC IDXQC-FFZB1
IC9863C-FFZB1

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Ecolink webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Эколинктин расмий өкүлү Webсайт

Тектеш документтер - FFZB1-ЭКО

Preview Ecolink ClearSky Chime + Siren CS-902 орнотуу колдонмосу
Ecolink ClearSky Chime + Siren (Модель CS-902) үчүн орнотуу колдонмосу, жупташтыруу, үн эффектинин конфигурациясы жана спецификациялар. Үйүңүздүн коңгуроосун жана сиренаңызды кантип орнотууну жана колдонууну үйрөнүңүз.
Preview Ecolink Z-Wave сенсорунун көйгөйлөрүн чечүү боюнча колдонмо
Ecolink Z-Wave сенсорлору үчүн LED индикаторлорун, шлюз жупташтыруу көйгөйлөрүн, сенсорду баштапкы абалга келтирүүлөрдү, тышкы байланыштарды жана батареянын мүнөздөмөлөрүн камтыган комплекстүү көйгөйлөрдү чечүү боюнча колдонмо. Z-Wave туташуу көйгөйлөрүн кантип чечүүнү билип алыңыз.
Preview Ecolink GDZW7-ECO Z-Wave Long Range Garage Door Controller Installation Manual
Comprehensive installation instructions and user manual for the Ecolink GDZW7-ECO Z-Wave Long Range Garage Door Controller. Learn how to add the device to your Z-Wave network, mount the tilt sensor and controller, connect to your garage door opener wirelessly or wired, and troubleshoot common issues. Includes specifications, package contents, and warranty information.
Preview Ecolink FireFighter Smoke/CO Alarm Monitor: Smart Home Safety Notification
Күчтүү коопсуздук үчүн үйүңүздүн автоматташтыруу тутумуңузга эскертмелерди жөнөтүп, учурдагы түтүн жана CO сигналдарын көзөмөлдөгөн акылдуу сенсор болгон Ecolink FireFighter жөнүндө билип алыңыз.
Preview ECOLINK Zigbee 3.0 эшик/терезе сенсору DWZB1-CE Колдонуучунун колдонмосу
ECOLINK Zigbee 3.0 Door/Window Sensor DWZB1-CE үчүн колдонуучу колдонмосу, анын спецификациялары, орнотуулары, иштетүүлөрү, жупташтыруулары, бузулууларды жоюулары жана FCC ылайыктуулугу деталдаштырылган.
Preview Ecolink GDZW7-ECO Z-Wave узак аралыкка орнотулган гараж эшигин башкаруучуну орнотуу жана колдонуучунун колдонмосу
Ecolink GDZW7-ECO Z-Wave узак аралыкка орнотулуучу гараж эшиги контроллерин орнотуу боюнча кеңири нускамалар жана колдонуучу колдонмосу. Түзмөктү Z-Wave тармагыңызга кантип кошууну, контроллерди жана эңкейиш сенсорун кантип орнотууну, гараж эшигин ачуучуга кантип туташтырууну жана кеңири таралган көйгөйлөрдү кантип чечүүнү үйрөнүңүз.