ELCO Lighting ELST66BZ

ELCO Lighting ELST66BZ 120V LED мини тепкичтүү чырактын колдонуу боюнча колдонмосу

Model: ELST66BZ

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your ELCO Lighting ELST66BZ 120V LED Mini Step Light. This product is designed to provide efficient and reliable illumination for steps, pathways, and other outdoor areas. Please read this manual thoroughly before installation and retain it for future reference.

2. Коопсуздук маалыматы

Коопсуз орнотуу жана эксплуатациялоо үчүн төмөнкү сактык чараларын аткарыңыз:

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

4. Техникалык шарттар

ӨзгөчөлүкСпецификация
Модель номериELST66BZ
Киргизүү көлөмүtage120V
Энергияны керектөө0.8 Вт
Жарык булагыИнтегралдык LED
Түс температурасы3000K (жылуу ак)
Түстөрдү көрсөтүү индекси (CRI)90+
Линзанын материалыSmooth White Acrylic
Faceplate өлчөмдөрү4 1/2" W x 2 3/4" H
МонтаждооHorizontal or Vertical, Single-Gang Box
Турак жай материалыGalvanized Stamped Steel
БүтүрүүBlack (Powder-Coated)
Өмүр35,000 70 саат (LXNUMX)
СертификаттарUL Listed for Wet Locations

5. Орнотуу боюнча нускамалар

Follow these steps to install your ELCO Lighting ELST66BZ LED Mini Step Light:

  1. Орнотууга даярданыңыз:
    • Электр тогуна урунбоо үчүн автоматтык өчүргүчтү же сактагыч кутучасын өчүрүңүз.
    • Ensure the mounting location is a standard single-gang receptacle box.
  2. Кронштейнди орнотуу:
    • Attach the provided installation bracket to the single-gang box using the screws.
  3. Электр байланыштарын жасоо:
    • Арматурадан чыккан кара зымды электр кутучасынан чыккан кара (ысык) зымга туташтырыңыз.
    • Арматурадан чыккан ак зымды электр кутучасынан чыккан ак (нейтралдуу) зымга туташтырыңыз.
    • Connect the green (ground) wire from the fixture to the bare copper or green ground wire from the electrical box.
    • Secure all connections with wire nuts and ensure they are tight. Carefully tuck wires into the electrical box.
  4. Түзмөктү орнотуу:
    • Align the step light fixture with the mounting bracket.
    • Secure the fixture to the bracket using the provided screws. Ensure the faceplate sits flush against the mounting surface.
  5. Күчтү калыбына келтирүү:
    • Электрди өчүргүчтөн же сактагыч кутудан кайра күйгүзүңүз.
    • Туура иштешин камсыз кылуу үчүн жарыкты текшериңиз.
ELCO Lighting ELST66BZ LED Mini Step Light, black finish with white acrylic lens, showing wiring.
This image displays the ELCO Lighting ELST66BZ LED Mini Step Light. It features a black faceplate with a smooth white acrylic lens. Electrical wires (green, black, white) are visible extending from the back of the unit, indicating it is ready for installation. Two visible screws secure the faceplate.

6. Операция

The ELCO Lighting ELST66BZ LED Mini Step Light operates directly from a 120V power supply. Once properly installed and connected to a switched power source, the light will illuminate when the switch is activated. The integrated LED provides a warm white light (3000K) with high color accuracy (90+ CRI), designed for consistent and long-lasting performance.

7. Техникалык тейлөө

The ELCO Lighting ELST66BZ LED Mini Step Light requires minimal maintenance:

8. Кыйынчылыктарды

If your ELCO Lighting ELST66BZ LED Mini Step Light is not functioning as expected, refer to the following table:

КөйгөйМүмкүн себепЧечим
Жарык күйбөйтТүзмөккө кубат жокАвтоматтык өчүргүчтү же сактагычты текшериңиз. Дубалдагы өчүргүчтүн КҮЙҮК абалда экенин текшериңиз.
Бошоң же туура эмес зымдарTurn off power. Verify all wire connections are secure and correct according to Section 5.
Жарык жылтылдайтБошоң зымдар байланышыTurn off power. Check and tighten all wire connections.
Шайкеш келбеген диммер которгучу (эгер бар болсо)This fixture is not designed for use with dimmer switches. Ensure it is connected to a standard ON/OFF switch.
Кыскартылган жарык чыгарууЛинзадагы кир же калдыктарЛинзаны жумшак менен тазалаңыз, damp кездеме.

If the problem persists after attempting these solutions, contact ELCO Lighting customer support.

9. Кепилдик жана колдоо

ELCO Lighting products are manufactured to high standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official ELCO Lighting website. For technical assistance, replacement parts, or any other inquiries, please contact ELCO Lighting customer support through their official channels.

ELCO Lighting Contact Information:
Please refer to the ELCO Lighting official webакыркы байланыш маалыматы үчүн сайт же продукт таңгак.

Тектеш документтер - ELST66BZ

Preview ELCO Lighting STEP LIGHT Installation Guide
Installation guide for the ELCO Lighting STEP LIGHT fixture, covering wall mounting, electrical connections, and trim installation. Includes safety warnings for older dwellings.
Preview ELCO Lighting 4-Inch LED Downlight Installation Instructions (EL415CT5X, EL410CT5X)
Detailed installation instructions for ELCO Lighting 4-inch LED Downlight retrofit kits, models EL415CT5X and EL410CT5X. Includes safety warnings, parts identification, and step-by-step assembly for incandescent and LED housings.
Preview ELCO Lighting 4-Inch LED Retrofit Trim Series Installation Instructions
Step-by-step installation guide for ELCO Lighting's 4-inch LED Retrofit Trim Series recessed downlights. Includes essential safety warnings, compatibility information, and detailed instructions for proper setup.
Preview ELCO Lighting 4-inch LED Retrofit Kit Installation Instructions
Installation guide for the ELCO Lighting 4-inch LED Retrofit Kit, providing step-by-step instructions for incandescent and LED housings, dimming information, and light distribution data.
Preview ELCO Lighting LED Recessed Luminaire Installation Guide
Comprehensive installation instructions for ELCO Lighting LED recessed luminaires, covering new construction and remodel applications. Details include fixture classification, ceiling mounting, electrical connections for 120V and 120/277V systems, and dimmer switch wiring compatibility.
Preview ELCO Koto™ System Trimless LED Light Engine Installation Instructions
Step-by-step installation guide for the ELCO Koto™ System Trimless LED Light Engine (Model ELK0727). Learn how to properly install the trimless housing, spackle frame, and LED module for a seamless ceiling integration.