Artemide Tolomeo Mini 100W E26 Table Lamp User Manual

1. Киришүү

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Коопсуздук маалыматы

• l камсыз кылууamp is connected to a power source within the specified voltage диапазону (120V).
• Лампанын максималдуу кубаттуулугунан ашпаңызtage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• л коюудан качыңызamp in areas with excessive moisture or extreme temperatures.
• l өзгөртүүгө аракет кылбаңызamp's electrical components. Refer servicing to qualified personnel.
• l сактаңызamp күйүүчү материалдардан алыс.

3. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттердин бар экендигин текшериңиз:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Алюминий базасы
• Shade
• Электр кабели

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Орнотуу нускамалары

1. Компоненттерди таңгактан чыгаруу: Таңгактан кылдаттык менен бардык бөлүктөрүн чыгарып, таза, тегиз бетке коюңуз.
2. Базаны тиркөө: lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Лампаны орнотуу: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Лamp: l коюңузamp туруктуу, жалпак бетинде.
5. Туташуу кубаты: Электр шнурын стандарттуу 120 В электр розеткасына сайыңыз.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Иштөө нускамалары

• Күйгүзүү/өчүрүү: лamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Позицияны тууралоо: лamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Техникалык тейлөө

• Тазалоо: lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Лампаны алмаштыруу: l камсыз кылууamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Муундардын чыңалуусу: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Кыйынчылыктарды

Lamp күйгүзбөйт:

Check if the power cord is securely plugged into the outlet and the lamp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Жарык жымыңдайт:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Arm does not hold position:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.