1. Киришүү
This manual provides comprehensive instructions for the Behringer SUPER-X PRO CX2310, a high-precision stereo 2-way/mono 3-way crossover with a dedicated subwoofer output. Designed for professional audio applications, this device accurately divides audio signals into different frequency bands, optimizing sound reproduction through multiple loudspeakers.
The CX2310 ensures precise frequency separation, allowing each speaker component (e.g., woofers, mid-range drivers, tweeters, subwoofers) to receive only the frequencies it is designed to reproduce efficiently. This results in improved sound clarity, increased system efficiency, and enhanced speaker protection.
1-сүрөт: бурчтуу фронт view of the Behringer SUPER-X PRO CX2310 crossover.
2. Маанилүү коопсуздук нускамалары
Before operating the CX2310, please read and adhere to the following safety guidelines:
- Электр камсыздоо: Агрегатты көрсөтүлгөн электр кубатына гана туташтырыңызtage. Ensure the power cord is undamaged and properly grounded.
- Нымдуулук: Do not expose the unit to rain or moisture. Avoid placing liquid-filled objects on the device.
- Вентиляция: Адекваттуу вентиляцияны камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
- Жылуулук: Do not place the unit near heat sources such as radiators, heat registers, or other heat-producing appliances.
- Тейлөө: Агрегатты өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
- Тазалоо: Кургак чүпүрөк менен гана тазалаңыз.
3. Негизги өзгөчөлүктөрү
The Behringer SUPER-X PRO CX2310 offers a range of features for precise audio signal processing:
- Иштөө режимдери: Configurable for stereo 2-way or mono 3-way operation.
- Сабвуфердин чыгышы: Dedicated mono subwoofer output with independent frequency control.
- Кроссовер чыпкалары: State-variable 24 dB/octave Linkwitz-Riley filters for precise frequency separation.
- Individual Mute Switches: Each output features a mute switch for easy system adjustment and troubleshooting.
- Киргизүүнү көзөмөлдөө: Adjustable input gain for level matching.
- Output Level Controls: Independent level controls for all outputs.
- Phase Invert Switches: Phase invert switches on all outputs for flexible system alignment.
- LED көрсөткүчтөрү: Clear LED indicators for input clip, mode selection, and output levels.
- Туташтыргычтар: Balanced XLR inputs and outputs for professional connectivity.
4. Башкаруу элементтери жана туташтыргычтар
4.1. Алдыңкы панелдин башкаруу элементтери
2-сүрөт: алдыңкы панелдин үстүндөview of the CX2310.
- INPUT GAIN: Тиешелүү канал үчүн киргизүү сезгичтигин тууралайт.
- CLIP LED: Illuminates when the input signal is clipping. Reduce input gain if this LED lights up frequently.
- LOW CUT: Activates a high-pass filter to remove unwanted low frequencies.
- XOVER FREQ (LOW/HIGH): Sets the crossover frequency between the low and high outputs for stereo 2-way mode, or low and mid outputs for mono 3-way mode.
- XOVER FREQ (MID/HIGH): Sets the crossover frequency between the mid and high outputs for mono 3-way mode.
- LOW OUTPUT LEVEL: Adjusts the output level for the low-frequency band.
- HIGH OUTPUT LEVEL: Adjusts the output level for the high-frequency band.
- MID OUTPUT LEVEL: Adjusts the output level for the mid-frequency band (mono 3-way mode only).
- MUTE BUTTONS: Silences the corresponding output for system tuning.
- PHASE INVERT: Inverts the phase of the corresponding output signal.
- РЕЖИМ КОЮУ: Selects between STEREO 2-WAY and MONO 3-WAY operation.
- SUBWOOFER FREQ: Sets the crossover frequency for the dedicated subwoofer output.
- SUBWOOFER GAIN: Сабвуфердин чыгаруу деңгээлин тууралайт.
- КҮЧ КҮЧТӨРҮ: Агрегатты күйгүзөт же өчүрөт.
4.2. Арткы панелдин туташтыргычтары
Сүрөт 3: Арткы панелдин үстүндөview of the CX2310.
- AC КИРҮҮ: Standard IEC connector for the mains power cable.
- INPUT L/R: Balanced XLR inputs for the stereo audio signal.
- LOW OUTPUT L/R: Balanced XLR outputs for the low-frequency signal.
- MID OUTPUT L/R: Balanced XLR outputs for the mid-frequency signal (mono 3-way mode only).
- HIGH OUTPUT L/R: Balanced XLR outputs for the high-frequency signal.
- ЧЫГУУ: Balanced XLR output for the mono subwoofer signal.
5. Орнотуу жана туташуу
Proper setup is essential for optimal performance. Always ensure all audio equipment is powered off before making connections.
5.1. Stereo 2-Way Operation
This configuration is suitable for systems with main stereo speakers and an optional subwoofer.
- Connect the stereo output of your mixer or audio source to the КИРГИЗҮҮ Л жана КИРГИЗҮҮ Р XLR connectors on the CX2310 rear panel.
- коюңуз РЕЖИМ switch on the front panel to STEREO 2-WAY.
- туташтыруу LOW OUTPUT L/R to the inputs of your low-frequency amplifier (e.g., for woofers).
- туташтыруу HIGH OUTPUT L/R to the inputs of your high-frequency amplifier (e.g., for tweeters/mid-range).
- Сабвуферди колдонсоңуз, аны туташтырыңыз ЧЫГАРЫҢЫЗ to the input of your subwoofer ampактивдүү же активдүү сабвуфер.
- кубат кабелин туташтырыңыз AC INPUT анан ылайыктуу электр розеткасына.
5.2. Mono 3-Way Operation
This configuration is ideal for a single, full-range speaker system divided into low, mid, and high frequency bands.
- Connect a mono audio source to the КИРГИЗҮҮ Л XLR connector. (The CX2310 will sum the inputs for mono 3-way operation if both are connected, or use only the left input if only one is present).
- коюңуз РЕЖИМ switch on the front panel to MONO 3-WAY.
- туташтыруу LOW OUTPUT L to the input of your low-frequency ampөмүрлүү.
- туташтыруу MID OUTPUT L to the input of your mid-frequency ampөмүрлүү.
- туташтыруу HIGH OUTPUT L to the input of your high-frequency ampөмүрлүү.
- Сабвуферди колдонсоңуз, аны туташтырыңыз ЧЫГАРЫҢЫЗ to the input of your subwoofer ampактивдүү же активдүү сабвуфер.
- кубат кабелин туташтырыңыз AC INPUT анан ылайыктуу электр розеткасына.
6. Иштөө нускамалары
Once connected, follow these steps to configure and operate your CX2310:
- Күйгүзүү: Turn on all connected amplifiers and then the CX2310. When powering down, turn off the CX2310 first, then the ampаман калгандар.
- Баштапкы жөндөөлөр: Баарын коюу INPUT GAIN жана OUTPUT LEVEL controls to their center (0 dB) position. Set crossover frequencies to a starting point recommended by your speaker manufacturer, or a common value like 100 Hz for low/high and 2 kHz for mid/high.
- Киргизүү деңгээлин жөндөө: Play an audio signal through your system. Adjust the INPUT GAIN until the signal is strong but the CLIP LED only flashes occasionally on peaks.
- Crossover Frequency Adjustment: Carefully adjust the XOVER FREQ controls to achieve the desired frequency separation. Listen for smooth transitions between frequency bands.
- Чыгуу деңгээлин жөндөө: Жеке колдонуу OUTPUT LEVEL controls to balance the volume of each frequency band. The БАСУУ buttons can be used to isolate bands for easier adjustment.
- Сабвуфер интеграциясы: тууралаңыз SUBWOOFER FREQ жана SUBWOOFER GAIN controls to blend the subwoofer output seamlessly with the main speakers.
- Фазаны тегиздөө: Эксперимент менен FASE INVERT switches if you notice phase cancellation or an unnatural sound. This helps ensure all speakers are working in phase.
7. Техникалык тейлөө
The Behringer CX2310 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- Тазалоо: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid abrasive cleaners or solvents.
- Курчап турган чөйрө: Operate the unit in a clean, dry environment. Avoid excessive dust, humidity, and extreme temperatures.
- Вентиляция: Ашыкча ысып кетүүнүн алдын алуу үчүн желдетүү тешиктери бүтөлүп калбаганын текшериңиз.
- Сактагыч: Эгер аппаратты узак убакытка сактасаңыз, аны электр кубатынан ажыратып, салкын, кургак жерде, эң жакшысы баштапкы таңгагында сактаңыз.
8. Кыйынчылыктарды
If you encounter issues with your CX2310, consult the following table before contacting support:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No sound from any output. | Unit not powered on; incorrect connections; input gain too low; all outputs muted. | Check power cable and switch; verify all XLR connections; increase input gain; ensure mute buttons are disengaged. |
| No sound from a specific output. | Output muted; output level too low; incorrect mode selection. | Check the specific output's mute button; increase output level; verify correct 2-way/3-way mode. |
| Бурмаланган үн. | Input signal too high (clipping); output signal too high. | Reduce input gain if CLIP LED is constantly lit; reduce output levels. |
| Үн же ызы-чуу. | Ground loop; unbalanced cables; faulty cables. | Ensure all equipment is properly grounded; use balanced XLR cables; test with different cables. |
| Subwoofer not working. | Subwoofer output muted; subwoofer gain too low; incorrect frequency setting. | Check subwoofer mute button; increase subwoofer gain; adjust subwoofer frequency control. |
9. Техникалык шарттар
Technical specifications for the Behringer SUPER-X PRO CX2310:
- Элемент Салмагы: 7.5 фунт
- Продукциянын өлчөмдөрү: 19 x 1.75 x 8.46 дюйм
- Туташтыргыч түрү: XLR
- Аппараттык интерфейс: 1/4-inch Audio (Note: Product images show XLR, specification might be generic or refer to internal components)
- Сигнал форматы: Аналог
- Кубат булагы: Электр зымдары
- Тtage: 9 Volts (Internal operating voltage, not mains input)
- Кроссовер чыпкалары: Linkwitz-Riley, 24 dB/octave
Figure 4: Silhouette illustrating the dimensions of the CX2310.
10. Кепилдик жана колдоо
The Behringer SUPER-X PRO CX2310 comes with a standard 1-year limited warranty. Users can extend this warranty to 3 years by registering their product online within 90 days of purchase. For detailed warranty terms and conditions, please refer to the official Behringer webсайт.
For technical support, service, or further inquiries, please visit the official Behringer support page or contact their customer service department. Keep your purchase receipt and product serial number readily available when seeking support.
Көбүрөөк маалымат алуу үчүн, киргиле Берингер расмий Webсайт.
