Pyle PLUTV43BTA 4-inch Off-Road Bluetooth Waterproof Speaker System User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Pyle PLUTV43BTA 4-inch Off-Road Bluetooth Waterproof Speaker System. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product. This amplified speaker system is designed for use in various 12V vehicles, including ATVs, UTVs, golf carts, and boats, offering robust audio performance in outdoor environments.

Коопсуздук маалыматы

Observe the following safety guidelines to prevent damage to the unit or injury to yourself:

• Ensure the power source is 12V DC. Incorrect voltagал түзмөккө зыян келтириши мүмкүн.
• Түзмөктү өз алдынча ачууга же тейлөөгө аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.
• Түзмөктү узак убакыт бою өтө жогорку температурага же түз күн нуруна дуушар кылбаңыз.
• Securely mount the speakers to prevent them from becoming loose during vehicle operation.
• Ensure all wiring connections are properly insulated and protected from water and debris.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• (1) 4-inch AmpНегизги спикер
• (1) 4-inch Passive Support Speaker
• Speaker Connection Wires (6.5 ft.)
• Wire Butt Connectors (16-22 AWG)
• EVA монтаждоо аянтчалары

Image: Contents of the Pyle PLUTV43BTA speaker system box, including two speakers, EVA mounting pads, wire butt connectors, and speaker wires.

Орнотуу жана орнотуу

Follow these steps for proper installation of your speaker system:

Спикерлерди орнотуу

1. Орнотуу кронштейнинин болтторун сууруп алыңыз: Use a screwdriver to loosen and remove the screws securing the mounting bracket to the speaker.
2. Slide Buckle with Rubber Pad: Place the rubber pad around the desired mounting bar (e.g., roll-bar, roll-cage). Position the buckle of the mounting bracket over the rubber pad.
3. Attach Screw to Lock the Buckle: Re-attach the mounting bracket to the speaker and tighten the screws securely, ensuring the speaker is firmly attached to the bar.

Image: Step-by-step diagram illustrating the mounting process for the speakers, showing how to secure them to a bar using the provided brackets and rubber pads.

Зымдарды туташтыруу

The system includes one amplified (main) speaker and one passive (support) speaker. Connect them as follows:

1. Динамик зымдарын туташтыруу: Use the provided speaker connection wires to link the passive speaker to the amplified main speaker. Ensure correct polarity (+ to + and - to -).
2. Connect Speaker Power Cable: Securely connect the speaker power cable from the amplified main speaker to a 12V DC power source on your vehicle. It is recommended to connect through an ignition-switched circuit or a dedicated switch to prevent battery drain. Use the provided wire butt connectors for secure and insulated connections.
3. Көмөкчү киргизүү (милдеттүү эмес): If using an external device via the 3.5mm Aux Input Jack, connect your device to this port on the main speaker.

Image: Detail from the installation diagram showing the connection of speaker wires and the speaker power cable to the main speaker.

Иштөө нускамалары

Күйгүзүү/өчүрүү

The speaker system will power on when connected to a 12V power source. If wired to an ignition-switched circuit, it will power on/off with your vehicle's ignition. If wired to a separate switch, use the switch to control power.

Bluetooth Жупташтыруу

1. Ensure the speaker system is powered on.
2. Мобилдик түзмөгүңүздө (смартфон, планшет ж.б.) Bluetooth функциясын иштетиңиз.
3. Издөө available Bluetooth devices. The network name for the speaker system is PYLEUSA.
4. Select "PYLEUSA" to pair your device. Once paired, you will hear a confirmation tone, and you can begin streaming audio wirelessly.
5. The wireless range is approximately 30+ feet.

Image: Illustration of a smartphone successfully paired with the Pyle speaker system via Bluetooth, displaying the network name 'PYLEUSA'.

Көмөкчү киргизүү

To play audio from devices without Bluetooth, connect them directly to the 3.5mm Aux Input Jack on the main speaker using a standard audio cable (not included).

Техникалык тейлөө

To ensure the longevity and optimal performance of your Pyle PLUTV43BTA speakers:

• Тазалоо: жумшак колдонуу, damp cloth to clean the speaker surfaces. Avoid harsh chemicals or abrasive cleaners.
• Суу таасири: While the speakers are waterproof (IP-X5 rated), prolonged submersion is not recommended. After exposure to saltwater or mud, rinse with fresh water to prevent corrosion.
• Байланыштары: Бардык зымдардын туташууларынын бекемдигин жана эскирүү же дат басуу белгилерин мезгил-мезгили менен текшерип туруңуз.

Image: A Pyle speaker enduring water splashes, highlighting its robust, weather-resistant design suitable for outdoor environments.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Бул продукт чектелген кепилдик менен келет. Кепилдик жөнүндө толук маалымат же техникалык колдоо алуу үчүн, расмий Pyle компаниясына кайрылыңыз. webсайтка же кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Кошумча жардам алуу үчүн төмөнкүгө кириңиз: www.pyleusa.com