SIMREX A240 A241 A230 A231 A120 A130 Battery Instruction Manual

1. Киришүү

This instruction manual provides essential information for the safe and effective use, charging, and maintenance of your SIMREX A240, A241, A230, A231, A120, A130 series rechargeable batteries. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Продукт бүтүп калдыview

The SIMREX batteries are designed as replacement or spare power sources for various SIMREX remote-controlled devices, including specific drone and RC car models. These are Ni-Cd (Nickel-Cadmium) rechargeable batteries, typically rated at 4.8V and 700mAh, offering reliable power for your compatible devices.

This image displays two blue SIMREX Ni-Cd 4.8V 700mAh rechargeable battery packs. Each battery pack has a black and red wire connector. A blurred image of an RC car chassis is visible in the background, indicating the intended use of these batteries.

3. Коопсуздук маалыматы

Always adhere to the following safety guidelines when handling and using rechargeable batteries:

• Батареяны бөлүктөргө бөлбөңүз, тешпеңиз же өзгөртпөңүз.
• Do not expose batteries to extreme temperatures (hot or cold), direct sunlight, or fire.
• Батарея терминалдарын кыска туташуудан сактаңыз.
• Батареяларды суудан жана нымдуулуктан алыс кармаңыз.
• Батареяларды кароосуз заряддабаңыз.
• Use only the charger specifically designed for these batteries.
• Эгерде батарейка бузулган, шишиген же агып жаткан белгилер байкалса, колдонууну дароо токтотуп, аны тийиштүү түрдө жок кылыңыз.
• Балдар жана үй жаныбарлары жетпеген жерде сактаңыз.

4. Орнотуу жана баштапкы заряддоо

4.1 Баштапкы төлөм

Before first use, fully charge the batteries. Connect the battery to its dedicated charger. The charging indicator on the charger will typically show red during charging and turn green when fully charged. Charging time may vary depending on the charger and battery's initial charge level.

4.2 Орнотуу

Refer to your device's instruction manual for specific battery installation procedures. Generally, ensure the device is powered off before installing or replacing batteries. Align the battery connector with the device's port and gently push until it clicks into place. Do not force the connection.

This image shows a white SIMREX drone with propeller guards, a black remote controller with a smartphone holder, and two black battery packs. This illustrates the typical components of a SIMREX drone kit, highlighting where these replacement batteries would be used.

5. Иштетүү боюнча нускамалар

5.1 Колдонуу

Once installed, power on your device. Monitor the device's battery indicator, if available, to track remaining power. Avoid completely draining the battery, as this can reduce its lifespan. It is recommended to stop operation and recharge when the device indicates low battery.

5.2 Кубаттоо

To recharge, remove the battery from the device and connect it to the appropriate charger. Ensure the charger is connected to a suitable power source. Always supervise batteries during charging. Disconnect the charger once the battery is fully charged.

6. Сактоо жана тейлөө

6.1 Сактоо

Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, it is advisable to store Ni-Cd batteries fully discharged to prevent memory effect, though modern Ni-Cd batteries are less prone to this. If storing for extended periods, periodically check the battery voltage.

6.2 Тазалоо

Keep battery terminals clean and free from dust or debris. Use a dry, soft cloth to wipe the battery if necessary. Do not use liquids or abrasive cleaners.

7. Кыйынчылыктарды

• Батарея кубатталбай жатат: Ensure the charger is properly connected to both the battery and a working power outlet. Check for any visible damage to the battery or charger.
• Кыска иштөө убактысы: The battery may not be fully charged, or its capacity may have degraded over time. Ensure proper charging cycles. If the issue persists, consider replacing the battery.
• Түзмөк күйбөй жатат: Verify the battery is correctly installed and fully charged. Check the device's battery compartment for any obstructions or corrosion.
• Battery overheating during charge/discharge: Discontinue use immediately. Overheating can indicate an internal fault. Dispose of the battery safely.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the official SIMREX webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.