AVANTEK зымсыз эшик коңгуроосу Колдонуучунун колдонмосу

Продукт бүттүview

The AVANTEK CB-21 Wireless Doorbell system provides a reliable and convenient solution for your home or office. It features a long wireless range, multiple melodies, adjustable volume levels, and a durable, waterproof design.

Image: The AVANTEK CB-21 Wireless Doorbell kit, showing one plug-in receiver and two wireless push-button transmitters.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• 1,000 FT/300 M Long Wireless Range: Ensures you never miss a visitor, even if you are a few rooms away or on another floor.
• 52 обон жана 5 томдук деңгээли: Tailor your doorbell experience with a wide selection of tunes and adjustable volume up to 115 dB.
• IP55 чаң жана суу өткөрбөйт: The transmitter is designed to withstand various harsh weather conditions, operating between -4 °F to 140 °F.
• Эстутум функциясы: Remembers your last melody and volume level after a power outage, eliminating the need to reset settings.
• Оңой орнотуу: Can be fixed to the wall using included screws and anchors or double-sided adhesive pads.
• Батареянын узак иштөө мөөнөтү: The transmitter uses a lithium battery with a 3-year maximum lifespan.

Орнотуу жана орнотуу

Follow these steps to set up your AVANTEK Wireless Doorbell:

1. Компоненттерди таңгактан чыгаруу: Ensure all components are present: 1 plug-in receiver, 2 transmitters, 2 adhesive tapes, 1 screwdriver, 4 screws, and 4 anchors.
2. Алуучунун жайгашуусу: Plug the receiver into a standard electrical outlet in a central location within your home.
3. Transmitter Battery Activation: Before mounting the transmitter, open its casing to remove the battery insulating strip. This activates the pre-installed lithium battery.
   

   Image: Illustration demonstrating the process of opening the transmitter to remove the battery insulating strip, which is crucial for initial power-up.
4. Өткөргүчтү орнотуу: Төмөнкү ыкмалардын бирин тандаңыз:
   • Solution A (Adhesive Tape): Clean the mounting surface thoroughly. Peel off one side of the double-sided adhesive tape and stick it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired location (e.g., door frame or wall) for at least 30 seconds.
   • Solution B (Screws and Anchors): Use the provided screws and anchors for a more secure installation. Mark the desired drilling points, drill pilot holes, insert the anchors, and then screw the transmitter into place.
   

   Image: Visual guide for installing the doorbell transmitter using either double-sided adhesive or screws and anchors.

Иштөө нускамалары

The AVANTEK Wireless Doorbell is designed for simple operation:

• Мелодияларды өзгөртүү:

  The receiver offers 52 different melodies. To cycle through them, press the "Music Selection" button on the side of the receiver. Press the button repeatedly until you find your desired tune.

  

  Image: The doorbell receiver highlighting its features: 52 selectable chimes and tunes, 5 adjustable volume levels, and an LED indicator for visual alerts.
• Үндү тууралоо:

  There are 5 adjustable volume levels, with a maximum setting of 115 dB. Press the "Volume Control" button on the side of the receiver to increase or decrease the volume to your preference.

• Pairing Transmitters (Custom Tones):

  You can set a different ring tone for each transmitter, allowing you to distinguish which doorbell has been rung (e.g., front door vs. back door). To do this:

  1. Select your desired melody on the receiver.
  2. Press and hold the "Volume Control" button on the receiver for approximately 5 seconds until the LED indicator flashes rapidly. This indicates pairing mode.
  3. Immediately press the button on the transmitter you wish to pair with this melody. The receiver will chime once to confirm successful pairing.
  4. Repeat for other transmitters with different melodies if desired.
  

  Image: Demonstrates how different ring tones can be assigned to individual transmitters, allowing users to differentiate between multiple entry points.

• Эстутум функциясы:

  The doorbell system is equipped with a memory function. In case of a power outage, your last selected melody and volume level will be remembered, and you will not need to reset them.

Техникалык тейлөө

• Battery Replacement (Transmitter):

  The transmitter uses a CR2032 lithium battery with an average lifespan of 3 years. When the transmitter's LED indicator no longer flashes or the range decreases significantly, it's time to replace the battery.

  1. Өткөргүчтү кылдаттык менен ачыңыз casing using a small flat-head screwdriver or the provided tool by inserting it into the small notch on the side and gently prying it open.
  2. Locate the coin cell battery (CR2032).
  3. Gently pry out the old battery.
  4. Жаңы CR2032 батареясын оң (+) тарабын өйдө каратып салыңыз.
  5. Snap the transmitter casing кайра бекем бириктирилет.
• Тазалоо:

  Wipe the doorbell receiver and transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. The transmitter is IP55 dustproof and waterproof, but avoid submerging it in water.

  

  Image: The doorbell transmitter shown in a wet environment, illustrating its IP55 dustproof and waterproof capabilities, suitable for outdoor use.

Проблемаларды чечүү

Продукт спецификациялары

Image: Detailed dimensions of the compact receiver and transmitter units, showing they are designed not to obstruct adjacent power sockets.

Кепилдик жана колдоо

AVANTEK is committed to delivering top-notch products and customer satisfaction. Our wireless doorbell is approved by FCC, CE, and RoHS standards.

For any inquiries, technical support, or warranty claims, please refer to the official AVANTEK customer service channels. You can also find additional resources and product information by visiting the official AVANTEK store:

Visit the AVANTEK Store

Ошондой эле PDF форматындагы толук колдонуучу колдонмосун жүктөп алууга болот: Колдонуучунун колдонмосун жүктөп алуу (PDF)