1. Киришүү
The PATLITE KG-100-R is a large, durable rotating warning light designed for industrial and safety applications. It features a powerful rotating flash and a robust construction for reliable performance in various environments. This manual provides essential information for the safe and effective installation, operation, and maintenance of your KG-100-R unit.
Figure 1: The PATLITE KG-100-R large rotating warning light, featuring a red globe and a black base with mounting bolts.
2. Коопсуздук маалыматы
Please read and understand all safety instructions before installing or operating the device. Failure to do so may result in injury or damage to the product.
- Электр коопсуздугу: Ensure the power supply matches the product's rated voltage (AC100V). Disconnect power before installation, maintenance, or troubleshooting. Only qualified personnel should perform electrical wiring.
- Монтаждоо: Mount the unit securely on a stable surface capable of supporting its weight (0.9 kg). Refer to the mounting dimensions for proper installation.
- Курчап турган чөйрө: The product has an IP23 protection class. Avoid exposing it to conditions beyond this rating, such as direct water jets or extreme dust, unless otherwise specified.
- Колдонуу: Do not drop or subject the unit to strong impacts. The globe is made of AS resin; handle with care to prevent scratches or cracks.
- Жылуулук: The bulb generates heat during operation. Do not touch the globe immediately after use. Ensure adequate ventilation around the unit.
3. Орнотуу жана орнотуу
Follow these steps for proper installation of the KG-100-R rotating warning light.
- Пакеттен чыгаруу: Carefully remove the unit from its packaging and inspect for any damage. Retain packaging for future transport or storage.
- Монтаждоо жери: Select a flat, stable surface for mounting. Consider visibility and environmental conditions.
- Бургулоо тешиктери: Refer to the mounting dimension diagram (Figure 2) for precise hole placement. Drill three Φ9mm mounting holes and a Φ30mm (minimum) cable hole for the power cord.
- Коопсуз орнотуу: Use the three M8 bolts on the base of the unit to secure it to the mounting surface. Ensure the unit is firmly attached to prevent vibration or displacement during operation.
- Зымдар: Connect the AC100V power supply to the unit's cable. The unit comes with a 450mm VCT cable (nominal cross-sectional area 0.75mm2) with a plug. Ensure all electrical connections comply with local electrical codes and safety standards.
Figure 2: Mounting dimensions diagram showing the three Φ9mm mounting holes arranged in a Φ140mm circle, and the recommended Φ30mm cable hole. All dimensions are in millimeters.
4. Иштөө нускамалары
The KG-100-R is designed for straightforward operation.
- Күйгүзүү: Once properly installed and wired, connect the power plug to an AC100V outlet. The rotating light will immediately begin operation.
- Операция: The internal reflector will rotate, causing the light to flash at a rate of approximately 180 times per minute. The unit is designed for continuous operation.
- Өчүрүү: To turn off the unit, disconnect the power plug from the outlet or switch off the power supply to the circuit.
5. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your KG-100-R.
- Тазалоо:
- Periodically wipe the outer globe with a soft, damp чаңды жана кирди тазалоо үчүн кездеме.
- Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the AS resin globe.
- Ensure the unit is powered off and cool before cleaning.
- Лампаны алмаштыруу:
- If the light stops flashing, the bulb may need replacement. Disconnect power before attempting replacement.
- Carefully remove the globe by twisting or unfastening its securing mechanism (refer to product diagram for specific method).
- Replace the old bulb with a new 120V 40W bulb. Ensure it is securely seated.
- Reattach the globe securely.
- Белдик текшерүү: The unit uses a silicone belt drive system for quiet and durable operation. If you notice unusual noise or inconsistent rotation, the belt may need inspection or replacement by a qualified technician.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your KG-100-R.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Light does not turn on or rotate. | Электр энергиясы жок. Жарылган лампа. Бошогон зымдар байланышы. | Электр розеткасын жана өчүргүчтү текшериңиз. Replace the bulb (refer to Maintenance section). Inspect and secure all wiring connections (ensure power is off). |
| Light rotates but does not flash. | Bulb is not working. | Лампочканы алмаштырыңыз. |
| Иш учурунда адаттан тыш ызы-чуу. | Бошоң монтаждоо. Internal component issue (e.g., belt). | Монтаждык болтторду текшерип, бекемдеңиз. Contact customer support for assistance if noise persists. |
If the problem persists after attempting these solutions, please contact PATLITE customer support.
7. Техникалык шарттар
Detailed technical specifications for the PATLITE KG-100-R.
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | KG-100-R |
| Түс | Кызыл |
| Rated Voltage | AC100V |
| Учурдагы керектөө | 0.32A |
| Коргоо классы | IP23 |
| Жаркылдоо ылдамдыгы | 180 жолу/мүнөт |
| Лампанын түрү | 120V 40W |
| Салмагы | 0.9 кг |
| Кабель түрү | VCT with plug |
| Кабелдин узундугу | 450 мм |
| Глобус материалы | AS Resin (weather resistant, transparent) |
| Дене материалы | Black plastic (UV resistant) |
| Өлчөмдөрү (болжол менен) | Φ186mm (diameter) x 205mm (height) |
| Origin | Индонезия |
Figure 3: Product dimensions diagram showing a diameter of Φ186mm and a total height of 205mm, with base height details. All dimensions are in millimeters.
8. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official PATLITE website or contact your local PATLITE distributor. Keep your purchase receipt as proof of purchase.
PATLITE Corporation
Webсайт: www.patlite.com
Байланыш маалыматын даректен тапса болот website under the "Support" or "Contact Us" section.
