Nilight TR-04 Truck Tailgate Bar User Manual

1. Продукт бүтүп калдыview

The Nilight TR-04 60-inch Triple Row LED Tailgate Bar is designed to enhance vehicle visibility and safety with its multi-functional lighting capabilities. Featuring 504 high-brightness LEDs, it provides dark red running lights, bright red brake lights, white reverse lights, sequential amber turning signals, and sequential strobe lights. Its durable, silicon-sealed construction ensures reliable performance in various weather conditions.

Image: Nilight TR-04 60-inch Triple Row LED Tailgate Bar with its 4-pin connector and wiring.

2. Техникалык шарттар

3. Эмнелер камтылган

• 1x 60" Triple Row Tailgate Light Bar
• 1x Additional Mounting Hardware (clips and screws)
• 1x User Manual (PDF link available in Warranty & Support section)

Image: The tailgate light bar, mounting clips, screws, and zip ties included in the package.

4. Орнотуу (Орнотуу)

4.1. Даярдоо

• Ensure your vehicle's working voltage 12V DC болуп саналат.
• Clean the mounting surface (e.g., tailgate area) thoroughly with alcohol and allow it to dry completely. This ensures optimal adhesion.

4.2. Жарык тилкесин орнотуу

The Nilight TR-04 features a strong adhesive backing for easy installation without drilling. For added security, use the provided mounting hardware.

• Carefully peel off the protective film from the adhesive strip on the back of the light bar.
• Position the light bar firmly onto the cleaned surface. Apply pressure along the entire length to ensure good contact.
• For enhanced hold, use the included mounting clips and screws. Secure the clips at appropriate intervals along the light bar.

Image: Illustration of the peel-and-stick installation method for the tailgate light bar.

4.3. Зымдарды туташтыруу

The light bar comes with a standard 4-pin flat trailer light connector for plug-and-play installation. An additional wire is provided for the reverse light function.

• Connect the 4-pin flat connector from the light bar to your vehicle's existing trailer wiring harness.
• Identify the reverse light wire on your vehicle (typically a white wire) and connect the additional white wire from the light bar to it.
• Before permanently securing all wiring, test all light functions to ensure correct operation and mounting direction.

Image: Detailed wiring diagram showing the connections for ground, running, turn, brake, and reverse lights.

5. Иштөө нускамалары

5.1. Жарыктын функциялары

The Nilight TR-04 tailgate bar offers six distinct lighting functions, synchronizing with your vehicle's signals:

• Dark Red Running Light: Illuminates when headlights are on.
• Bright Red Brake Light: Activates when the brake pedal is pressed.
• White Reverse Light: Turns on when the vehicle is in reverse.
• Sequential Amber Turn Signals: Amber LEDs illuminate sequentially in the direction of the turn.
• Sequential Strobe Light: Amber LEDs flash sequentially for hazard warning.

Image: Visual representation of the tailgate bar's various light functions, including reverse, turn signals, brake, running, and strobe lights.

Image: The tailgate light bar installed on a truck, demonstrating its bright and clear illumination for enhanced visibility.

5.2. Продукцияны көрсөтүүчү видео

Video: An official demonstration of the Nilight 60-inch Triple Row Tailgate Light Strip, showcasing its various lighting modes and brightness.

6. Техникалык тейлөө

6.1. Жалпы кам көрүү

The Nilight TR-04 tailgate bar is designed for durability and a long lifespan of over 30,000 hours, thanks to its fully silicon-sealed and flexible construction. Minimal maintenance is required.

• Periodically inspect the light bar and its wiring for any signs of damage or loose connections.
• Clean the surface of the light bar with a soft, damp кирди жана калдыктарды тазалоо үчүн кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.
• Ensure the adhesive and mounting clips remain secure, especially after exposure to extreme weather conditions.

Image: The tailgate light bar installed on a truck in a snowy environment, highlighting its cold-weather capability.

Сүрөт: Жакын план view emphasizing the IP67 waterproof rating of the silicon-sealed light bar.

7. Кыйынчылыктарды

7.1. Жалпы маселелер

• Lights not functioning or partially lit:
  • Check all wiring connections, especially the 4-pin connector and the reverse light wire, to ensure they are secure and properly seated.
  • Verify that your vehicle's 12V DC power supply is active.
  • Inspect the light bar for any visible damage or cuts in the silicone housing.
• Incorrect signal behavior (e.g., turn signals not sequential, random flashing):
  • Ensure the light bar is connected to the correct vehicle wires for each function (running, brake, turn, reverse).
  • Some vehicles may require an LED-compatible flasher relay to prevent hyper-flashing or incorrect sequential behavior. Consult a professional if issues persist.
• Brake light delay:
  • This can sometimes occur due to vehicle-specific wiring or relays. If the delay is significant and affects safety, consult a qualified automotive electrician.
• Light bar falling off:
  • Ensure the mounting surface was thoroughly cleaned and dry before installation.
  • Re-apply pressure to the adhesive strip.
  • Utilize the included mounting clips and screws for a more secure attachment.

If you encounter persistent issues not covered here, please refer to the support information in the next section.

8. Кепилдик жана колдоо

The Nilight TR-04 Truck Tailgate Bar comes with a 2 жылдык кепилдик сатып алынган күндөн тартып, өндүрүштүн кемчиликтерин жана нормалдуу колдонууда бузулууларды камтыйт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

For detailed instructions, additional support, or warranty inquiries, please refer to the official user manual or contact Nilight customer service.

Расмий колдонуучу колдонмо (PDF): Бул жерден жүктөп алыңыз

Кошумча жардам алуу үчүн, баш багыңыз Nilight Store on Amazon.

9. Коопсуздук маалыматы

• Always ensure the vehicle's power is off before attempting installation or maintenance.
• If you are unsure about the installation process, seek professional assistance from a qualified automotive technician.
• Do not modify the light bar or its wiring, as this may void the warranty and could lead to electrical hazards.
• Ensure the light bar is securely mounted and does not obstruct any existing vehicle lights or license plates.
• Adhere to all local and national regulations regarding vehicle lighting.