1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ESBE VTA 323 KF 22 Mm Thermostatic Mixing Valve. Please read these instructions carefully before installation and retain them for future reference.
2. Коопсуздук маалыматы
Маанилүү коопсуздук көрсөтмөлөрү:
- Орнотуу жергиликтүү эрежелерге жана стандарттарга ылайык квалификациялуу адис тарабынан аткарылышы керек.
- Орнотуу же техникалык тейлөө иштерин баштоодон мурун, негизги суу менен камсыздоо өчүрүлгөнүн текшериңиз.
- Do not modify the valve or its components. Use only genuine ESBE spare parts.
- Protect the valve from freezing temperatures.
- Орнотуу жана тейлөө учурунда ар дайым тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
3. Продукт бүтүп калдыview
The ESBE VTA 323 KF 22 Mm is a thermostatic mixing valve designed for domestic hot water applications. It ensures a constant and safe mixed water temperature at the outlet, protecting against scalding and optimizing energy consumption.
1-сүрөт: ESBE VTA 323 KF 22 Mm Thermostatic Mixing Valve. This image displays the brass body of the valve with a dark grey plastic top housing. The ESBE logo is visible on the front, along with red and blue arrows indicating hot and cold water inlets and a mixed water outlet.
3.1 Негизги компоненттер
- Клапан корпусу: Brass construction for durability.
- Thermostatic Element: Automatically adjusts the mixing ratio of hot and cold water.
- Кирүүчү жерлер: Clearly marked for hot (red) and cold (blue) water.
- Чыгуу: For mixed water supply.
- Adjustment Knob/Cap: For setting the desired mixed water temperature (under the dark grey cap).
4. Орнотуу жана орнотуу
Follow these steps for proper installation of the ESBE VTA 323 KF 22 Mm valve:
- Даярдоо: Turn off the main water supply. Drain the system to relieve pressure.
- Позициялоо: Install the valve in an easily accessible location for future maintenance. Ensure the flow direction arrows on the valve body match the system's water flow. The hot water inlet is typically marked with red, and the cold water inlet with blue.
- Байланыштары: Connect the hot water supply to the designated hot inlet, and the cold water supply to the cold inlet. Connect the mixed water outlet to the distribution system. Use appropriate sealing materials (e.g., PTFE tape or hemp) on threaded connections to prevent leaks. The 22 mm connections are designed for standard plumbing.
- Агып кетүүнү текшерүү: Once all connections are secure, slowly open the main water supply and check for any leaks. Tighten connections as necessary.
- Баштапкы температуранын жөндөөсү: Refer to the "Operating Instructions" section to set the desired mixed water temperature.
5. Иштөө нускамалары
The ESBE VTA 323 KF 22 Mm valve is largely automatic once the desired temperature is set. The primary operation involves setting and, if necessary, adjusting the mixed water temperature.
- Accessing Adjustment: The temperature adjustment mechanism is typically located under the dark grey protective cap on top of the valve. Carefully remove this cap.
- Температураны орнотуу: Rotate the adjustment knob (or screw) to increase or decrease the mixed water temperature. Turn towards the 'hot' indicator (often red) to increase temperature, and towards the 'cold' indicator (often blue) to decrease it.
- Текшерүү: Use a thermometer to verify the mixed water temperature at a tap downstream from the valve. Adjust as needed until the desired safe temperature (e.g., 38-45°C for domestic use) is achieved.
- Securing Setting: Once the desired temperature is set, replace the protective cap.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your ESBE VTA 323 KF 22 Mm valve.
- Жылдык текшерүү: Annually inspect the valve for any signs of leaks, corrosion, or damage.
- Температураны текшерүү: Periodically verify the mixed water temperature with a thermometer to ensure it remains at the desired setting. Recalibrate if necessary.
- Тазалоо: In areas with hard water, mineral deposits may accumulate. If the valve's performance degrades (e.g., inconsistent temperature), it may require cleaning. This typically involves disassembling the valve, cleaning the internal components (especially the thermostatic element) with a suitable descaling solution, and reassembling it. This procedure should ideally be performed by a qualified technician.
- Запастык бөлүктөр: If any components need replacement, use only genuine ESBE spare parts.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Inconsistent mixed water temperature | Fluctuating inlet pressures; clogged thermostatic element; sediment buildup. | Check system pressures. Clean or descale the thermostatic element. Inspect for sediment. |
| No hot water or only cold water | Hot water supply failure; valve stuck in cold position; severe blockage. | Verify hot water supply. Inspect and clean the valve internals. |
| No cold water or only hot water | Cold water supply failure; valve stuck in hot position; severe blockage. | Verify cold water supply. Inspect and clean the valve internals. |
| Water leakage from valve | Loose connections; damaged seals/gaskets; cracked valve body. | Tighten connections. Replace seals/gaskets. If valve body is cracked, replace the entire valve. |
If you are unable to resolve an issue, contact a qualified plumber or ESBE customer support.
8. Техникалык шарттар
- Өндүрүүчү: ESBE
- Модел: VTA 323 KF 22 Mm
- Элемент Салмагы: 1 кг
- ASIN: B07L25C8HD
- Биринчи жеткиликтүү датасы: 15-январь, 2020-жыл
- Туташуу өлчөмү: 22 mm (KF refers to compression fittings)
- Note: Specific temperature range and flow rates are typically detailed in the product's technical data sheet.
9. Кепилдик жана колдоо
For warranty information, please refer to the documentation provided with your purchase or visit the official ESBE website. For technical support or inquiries regarding spare parts, please contact your local ESBE distributor or customer service department.
ESBE Contact Information: Сураныч, келиңиз www.esbe.eu аймактык байланыш маалыматы үчүн.
