1. Киришүү
Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.
- Always operate the laser level in a safe manner, following all instructions in this manual.
- Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
- Keep the laser level out of reach of children and untrained personnel.
- Ensure the work area is free from obstructions and potential hazards.
- Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
- Агып кетпеш үчүн аппарат узак убакыт бою колдонулбаса, батареяларды алып салыңыз.
- Protect the device from extreme temperatures, moisture, and direct sunlight.
3. Пакеттин мазмуну
Таңгактан чыгаргандан кийин, төмөндө көрсөтүлгөн нерселердин бардыгы бар экенин жана бузулбаганын текшериңиз:
- STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
- Жумшак ташуучу баштык
- L-Bracket (Magnetic Mounting Bracket)
- 4 х AA щелочтук батарейкалар
- Laser Target Plate (if included, often a small white plate)
- Колдонуучунун Колдонмосу (бул документ)
1-сүрөт: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.
4. Продукт бүтүп калдыview
The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:
- Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
- Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
- Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
- Маятник кулпу: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
- Магниттик база: Features a magnetic base for direct attachment to metal structures.
- Алуучу режими: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
- Туруктуу курулуш: Rubber-coated housing provides IP54 protection against dust and splashing water.
- Монтаждоо параметрлери: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.
2-сүрөт: Side profile of the laser level, showcasing анын бышык дизайны.
5. Орнотуу
5.1 Батареяны орнотуу
- Locate the battery compartment cover on the back or bottom of the laser level.
- Капкакты жылдырып же ачуу менен ачыңыз.
- Insert 4 AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Батарея уясынын капкагын бекем жабыңыз.
5.2 Лазердик деңгээлди орнотуу
The FMHT77586-1 offers several mounting options:
- Жалпак бети: Place the laser level directly on a stable, flat surface.
- Tripod орнотуу: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
- Магниттик орнотуу: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.
3-сүрөт: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.
6. Иштөө нускамалары
6.1 Powering On and Self-Leveling Mode
- Unlock the pendulum by sliding the lock switch to the unlocked position.
- Press the power button (usually marked with a power symbol) to turn on the laser level.
- The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
- Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.
6.2 Switching Laser Modes
Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:
- Horizontal Line Only
- Vertical Line Only
- Cross Line (Horizontal and Vertical)
4-сүрөт: Interacting with the control panel to select laser modes.
6.3 Кол режими (кулпуланган маятник)
To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.
6.4 Receiver Mode
For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.
5-сүрөт: Laser level in operation, projecting precise green cross lines for measurement.
6.5 Өчүрүү
To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.
7. Техникалык тейлөө
- Тазалоо: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
- Сактагыч: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
- Батареяга кам көрүү: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
- Калибрлөө текшерүү: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Лазердик сызыктар күңүрт же көрүнбөйт. | Low batteries; dirty laser aperture; too much ambient light. | Replace batteries; clean laser aperture; use in lower light conditions or activate receiver mode with an optional receiver. |
| Лазердик сызыктар жаркылдап турат. | Device is outside its self-leveling range; pendulum is locked (manual mode). | Reposition the device on a more level surface; unlock the pendulum for self-leveling mode. |
| Түзмөк күйбөйт. | Batteries are dead or incorrectly installed; pendulum lock is engaged. | Replace batteries and check polarity; ensure pendulum is unlocked (for self-leveling mode). |
| Туура эмес өлчөө. | Device is not level; calibration issue; unstable surface. | Ensure the device is within its self-leveling range; check calibration; place on a stable surface. |
9. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | FMHT77586-1 |
| Лазердик түрү | Green Diode Laser (510 - 530 Nm) |
| Лазердик класс | 2-класс |
| Иштөө диапазону | 30 m (50 m with receiver) |
| Тактык | ±3 мм 10 м |
| Өз алдынча тегиздөө диапазону | ±4° |
| Өзүн өзү тегиздөөчү убакыт | 5 секунд |
| Power Source | 4 х AA щелочтук батарейкалар |
| Батареянын иштөө мөөнөтү | Approx. 5 hours (single line operation) |
| Ingress Protection | IP54 (чаң жана чачыраган суудан корголгон) |
| Монтаждык жип | 1/4" жана 5/8" |
| Өлчөмдөрү (L x W x Y) | 20 x 16 x 16 см (болжол менен) |
| Салмагы | 1 кг (болжол менен) |
| Иштөө режими | Automatic (Self-leveling) |
| Материал | Rubber, Magnetic |
10. Кепилдик жана колдоо
STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
For further assistance, please contact STANLEY FATMAX customer service.
