Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Pyle PSLSW6 6-Channel Speaker Selector Switch. This device allows you to connect and control up to six pairs of speakers from a single stereo amplifier or receiver, offering independent volume control for each speaker zone. Please read this manual thoroughly before use to ensure proper installation and optimal performance.
Продукт өзгөчөлүктөрү
- Convenient audio control for up to 6 pairs of speakers.
- Supports home theater stereo ampкөтөргүч системалар.
- Independent audio source channel volume controls for each speaker pair.
- Input/Output: Screw-type connector terminals.
- Compact desktop/tabletop receiver design.
- Front panel button control center.
- Master power switch.
- Built-in electronic overload protection circuitry.
Коопсуздук нускамалары
To reduce the risk of electric shock, fire, or damage to your equipment, please observe the following precautions:
- Агрегатты ачпаңыз casinг. Ичинде колдонуучу тейлей турган бөлүктөр жок. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Ensure all connections are secure and correctly polarized before powering on your ampкөтөргүч/алуучу.
- Do not expose the unit to moisture, rain, or extreme temperatures.
- Place the unit on a stable, flat surface with adequate ventilation.
- Always turn off your amplifier/receiver before making or changing any connections to the speaker selector.
- Use speaker wire of appropriate gauge (up to 14 AWG) for optimal performance and safety.
Орнотуу жана орнотуу
Follow these steps to correctly set up your Pyle PSLSW6 speaker selector switch:
1. Пакеттен чыгаруу жана жайгаштыруу
Carefully remove the PSLSW6 from its packaging. Place the unit on a stable, level surface near your stereo receiver or amplifier. Ensure there is sufficient space for cable connections and ventilation.
Сүрөт 1: Алдыңкы view of the Pyle PSLSW6 speaker selector switch, showing the six volume controls and master power switch.
Figure 2: Dimensions of the Pyle PSLSW6 unit, measuring 16.9 inches in length, 6.3 inches in width, and 3.0 inches in height.
2. Connecting Your Ampкуткаруучу/алуучу
Locate the speaker outputs on your stereo amplifier or receiver. Connect the left and right outputs from your amplifier/receiver to the "A AMP" or "B AMP" inputs on the rear of the PSLSW6 using appropriate speaker wire (up to 14-gauge). Ensure correct polarity (positive to positive, negative to negative).
Сүрөт 3: Жакын пландан view of the screw-type connector terminals on the rear of the PSLSW6, designed for secure speaker wire connections.
3. Connecting Your Speakers
Connect up to six pairs of speakers to the corresponding "SPEAKER OUTPUTS" terminals (1 through 6) on the rear of the PSLSW6. Again, observe correct polarity for each speaker pair. The unit supports up to 100 watts MAX per audio/speaker channel.
Figure 4: Diagram illustrating the connection of a stereo receiver to the PSLSW6 inputs and six pairs of speakers to the corresponding outputs.
Операция
Once all connections are made, you can begin operating your PSLSW6 speaker selector switch.
1. Мастер Power Switch
The master power switch, located on the front panel, controls the overall power to the unit. Ensure this switch is in the "ON" position for the unit to function.
Figure 5: Close-up of the front panel, highlighting the master power switch on the left and the individual volume controls for each speaker zone.
2. Speaker Selection and Volume Control
Each of the six channels has an independent volume control knob and a corresponding A/B switch. To activate a speaker pair, turn its volume knob from "OFF" towards "MAX" and ensure the A/B switch is engaged. You can activate multiple speaker pairs simultaneously and adjust their volumes independently to customize your listening experience in different zones.
The unit also features an "ALL SPEAKERS" switch, which can be used to quickly enable or disable all connected speaker pairs.
Техникалык тейлөө
The Pyle PSLSW6 is designed for long-term reliability and requires minimal maintenance.
- Тазалоо: Use a soft, dry cloth to clean the exterior of the unit. Avoid using harsh chemicals or abrasive cleaners.
- Вентиляция: Ensure that the ventilation slots on the unit are not obstructed to prevent overheating.
- Байланыштары: Periodically check all speaker wire connections to ensure they remain secure. Loose connections can lead to poor sound quality or intermittent audio.
Проблемаларды чечүү
If you encounter issues with your PSLSW6, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Динамиктерден үн жок. |
|
|
| Бурмаланган же начар үн сапаты. |
|
|
| Volume levels are inconsistent between channels. |
|
|
Техникалык шарттар
- Модел: PSLSW6
- Динамик тандоо түрү: 6-канал
- Кубат менен иштөө: Аудио/спикер каналына 100 Вт MAX
- Динамик кабелдик зымдарды колдоо: 14-кабарга чейин (14 AWG)
- Минималдуу импеданс: <8 Ом
- Жыштык жообу: 20Гц-20кГц
- Өлчөмдөрү (L x W x D): 16.9'' x 6.3'' x 3.0'' дюйм
- Элемент Салмагы: 9.78 фунт
- Түсү: Кара
- Туташтыргыч түрү: Бурама
- Шайкеш түзмөктөр: Home Theater Receiver, Stereo System
Кепилдик жана колдоо
Кепилдик маалыматы жана техникалык колдоо үчүн расмий Pyle кайрылыңыз webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
You can visit the Pyle Store for more information: Pyle расмий дүкөнү
