HOBOT-298 автоматтык терезе тазалоочу роботтун колдонуучу колдонмосу

Introduction

The HOBOT-298 is an automatic window cleaning robot designed to efficiently clean various glass surfaces. It features ultrasonic water spray, AI smart route planning, and control via smartphone app or remote. This manual provides essential instructions for safe and effective operation, maintenance, and troubleshooting.

Маанилүү коопсуздук маалыматы

Read all instructions carefully before operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• The robot works with a power cord ONLY. Do NOT operate on battery power alone.
• Always attach the safety rope before placing the robot on a window. Ensure the safety rope is securely fastened to a sturdy anchor point capable of withstanding 150 Kgf of tension.
• Do NOT use the robot on frames with non-rectangular (rounded) edges, as this may affect its ability to detect edges and maintain suction.
• The minimum surface cleaning area is 13x13 inches (33x33 cm) for any glass thickness of 3 mm or more.
• Колдорду, чачтарды жана бош кийимдерди кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Do not use the robot in wet conditions or expose it to rain.
• Берилген кубат адаптерин жана аксессуарларын гана колдонуңуз.
• Ensure the power cord and extension cord are securely connected and not damaged.
• Do not allow children to operate the robot.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• HOBOT-298 Window Cleaning Robot
• AC адаптер
• Узартуу кабели
• HOBOT Window Detergent
• Коопсуздук аркан
• Set of Cleaning Cloths (3 pieces)
• Алыстан башкаруу

Продукт бүттүview

Familiarize yourself with the main components of your HOBOT-298 robot.

Сүрөт: Жогорку view of the HOBOT-298 robot. Key features include the battery indicator, power button, start/pause button, and the transparent water tank with a "MAX" fill line. The safety rope is also visible.

• Кубат которгучу: Роботту күйгүзөт же өчүрөт.
• Баштоо/тындыруу баскычы: Initiates or pauses cleaning cycles.
• Батарея көрсөткүчү: Shows the status of the internal UPS battery.
• Суу багы: Holds cleaning solution for the ultrasonic spray.
• Коопсуздук арканын бекитүү жери: Where the safety rope is secured.
• Тазалоочу төшөктөр: Microfiber cloths attached to the bottom for cleaning.
• Laser Sensors: Detect window edges for navigation.

Жайгашуу

1. Тазалоочу сүлгүлөрдү бекитүү: Securely attach the clean microfiber cloths to the bottom of the robot. Ensure they cover the cleaning pads completely.
2. Сууну толтуруу: Open the cap of the water tank and fill it with HOBOT Window Detergent or distilled water. Do not overfill. The tank is replaceable if the nozzle clogs.
3. Туташуу кубаты: Connect the AC adapter to the robot and then plug it into a power outlet. Use the extension cord if necessary. The robot operates only when connected to power.
4. Коопсуздук арканын бекитүү: Securely tie the safety rope to a sturdy object indoors, such as a heavy piece of furniture or a window frame anchor. Ensure the rope is taut but allows the robot full range of motion.

Image: The HOBOT-298 robot with its safety rope attached, demonstrating the importance of securing it to a strong anchor point. The rope is rated for 150 Kgf tension.
5. Install HOBOT App (Optional): For smartphone control, download the HOBOT App from your device's app store. Follow the in-app instructions to pair your smartphone with the robot via Bluetooth.


Image: A smartphone screen showing the HOBOT app, which allows for Bluetooth remote control of the robot and provides notifications.

6. Күйгүзүү: Flip the main power switch on the robot to the "ON" position.

Иштөө нускамалары

1. Жайгашкан жери: Place the robot on the window surface. Ensure it is centered and has good contact with the glass. The robot will automatically suction onto the surface.

Сүрөт: каптал view of the HOBOT-298 robot attached to a window, illustrating its powerful suction capability (up to 6kg) for stable adhesion.
2. Тазалоону баштоо:
   • Using the Robot Button: Роботтогу "Баштоо/Тынытуу" баскычын басыңыз.
   • Алыстан башкарууну колдонуу: Use the provided remote control to select a cleaning mode and start.
   • Смартфон тиркемесин колдонуу: Open the HOBOT App, connect to the robot, and select your desired cleaning mode.
3. Тазалоо режимдери: The robot offers multiple automatic operation modes for cleaning the entire window. It uses AI Smart Route planning to navigate in a zigzag pattern.
4. Ultrasonic Water Spray: The robot will automatically spray water or detergent onto the window surface during cleaning.
5. Аяктоо: The robot will automatically stop and return to its starting point upon completion of the cleaning cycle.
6. Алып салуу: Once the robot has stopped, carefully grasp it and remove it from the window. Turn off the power switch.

Колдонуу боюнча маанилүү эскертүүлөр:

• For optimal results, ensure the window surface is free of large debris before operation.
• The robot is designed for glass surfaces and can also be used on ceramic tiles, cement walls, and cut glass.
• The auto-adjustable pneumatic pad maintains balanced pressure for effective cleaning.
• Laser sensors enable detection of frameless windows.

Техникалык тейлөө

1. Тазалоочу кездемелер: After each use, remove the microfiber cleaning cloths and wash them. They are reusable. Replace cloths when they show signs of wear or reduced cleaning performance.


Image: The large 24x24 cm microfiber cleaning cloth used by the HOBOT-298 for efficient wiping.

2. Water Tank/Nozzle: If the ultrasonic spraying nozzle becomes clogged, the entire water tank can be replaced. Refer to the HOBOT website or support for replacement parts and instructions.
3. Жалпы тазалоо: Wipe the exterior of the robot with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.
4. Сактагыч: Роботту колдонбогондо салкын, кургак жерде сактаңыз.

Проблемаларды чечүү

Robot does not suction to the window:

• Ensure the power cord is securely connected and the robot is powered on.
• Check if the window surface is clean and dry. Excessive dirt or moisture can reduce suction.
• Verify that the cleaning cloths are properly attached and not obstructing the suction area.
• Ensure the minimum cleaning area requirement (13x13 inches) is met.

Робот так калтырат же натыйжалуу тазалабайт:

• Replace or wash the cleaning cloths. Dirty cloths can cause streaking.
• Ensure the water tank is filled with appropriate cleaning solution.
• For very dirty windows, a pre-cleaning pass with dry cloths may be beneficial, followed by a wet cleaning pass.
• Check if the ultrasonic spray nozzle is clogged. If so, the water tank may need replacement.

Robot gets stuck or falls:

• Ensure the safety rope is always attached and secured.
• Verify that the window edges are not rounded or irregular, which can interfere with edge detection.
• Check for obstructions on the window surface.
• If the robot consistently gets stuck in corners, manual intervention may be required to guide it.

Колдонмого туташуу маселелери:

• Смартфонуңузда Bluetooth иштетилгенин текшериңиз.
• Make sure the robot is powered on and within Bluetooth range.
• Restart the HOBOT App and try pairing again.

Техникалык шарттар

Сүрөт: Өлчөмдүү view of the HOBOT-298 robot, indicating its length, width, and height.

Кепилдик жана колдоо

For warranty information, technical support, or to purchase replacement parts, please visit the official HOBOT website or contact HOBOT customer service.

You can also find frequently asked questions (FAQ) on the HOBOT Amazon store page.

For app-related support, visit: http://app.hobot.com.tw/hobotapplink.php

Расмий продукт Videos