1. Киришүү
This manual provides instructions for the Wayne Dalton 372310 (Model 3973C) 3-button garage door remote control. This remote operates on a 372 MHz frequency and is designed for use with compatible Wayne Dalton garage door opener systems. Please read these instructions carefully before attempting to set up or operate your new remote control.
2. Шайкештик
The Wayne Dalton 372310 (3973C) remote control is compatible with Wayne Dalton garage door opener models that operate on a 372 МГц жыштыгы. This includes, but is not limited to, the following models:
- Wayne Dalton Classic Drive: 3014, 3018, 3018DLX, 3514, 3522, 3522DLX
- Wayne Dalton Quantum: 3214, 3314, 3316, 3414
- Wayne Dalton iDrive: All models 3660-372, 3661-372, 3662-372, 3663-372, 3760-372, 3751-372, 3651-372, 3750-372, 3790-372, 3790-Z
- Wayne Dalton Prodrive: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B, 3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z
- Wayne Dalton Doormaster: BDOR-2000 models using 372 Mhz with a yellow antenna wire
Please verify your existing garage door opener's frequency and model number to ensure compatibility.
3. Орнотуу жана программалоо
To program your new Wayne Dalton 372310 remote control to your garage door opener, follow these steps:
- "Үйрөнүү" баскычын табыңыз: On your Wayne Dalton garage door opener motor head unit, locate the "Learn" button. The location may vary depending on your specific opener model. Refer to your garage door opener's manual if you cannot find it.
- Үйрөнүү режимин иштетүү: Press and immediately release the "Learn" button on the garage door opener. The indicator light on the opener should illuminate, signaling that the opener is in programming mode. You typically have about 30 seconds to complete the next step.
- Пультту программалоо: Within the 30-second window, press and hold the desired button on your new Wayne Dalton 372310 remote control.
- Программалоону ырастоо: Release the remote button once the garage door opener's light flashes or the opener activates (moves the door). This indicates successful programming.
- Пультту текшерүү: Press the programmed button on your remote control to ensure it operates the garage door correctly.
This image shows the front of the remote control with its three distinct buttons for operation.
If the remote does not work after following these steps, repeat the process. Ensure you are within range of the opener when programming.
4. Пультту иштетүү
Once programmed, operating your Wayne Dalton 372310 remote control is straightforward:
- Эшикти ачуу/жабуу: Press the programmed button on the remote control once. The garage door will begin to open or close.
- Эшикти токтотуу: Press the programmed button again while the door is in motion to stop it.
- Эшикти артка кайтаруу: If the door is stopped mid-cycle, pressing the button again will reverse its direction.
Ensure a clear line of sight between the remote and the garage door opener for optimal performance. Avoid pressing the button multiple times rapidly, as this may confuse the opener's signal.
5. Maintenance and Battery Replacement
The Wayne Dalton 372310 remote control requires a battery for operation. If the remote's range decreases or it stops responding, the battery may need replacement.
Батареяны алмаштыруу кадамдары:
- Алыстан башкаруу пультун C ачыңызasing: Carefully locate the seam on the remote control casing. Use a small flathead screwdriver or a coin to gently pry open the two halves of the remote.
- Батареянын түрүн аныктоо: Note the type and orientation of the existing battery. The remote typically uses a 12V A23 battery or similar.
- Эски батареяны алып салуу: Эски батарейканы анын отсекинен этияттык менен чыгарып алыңыз.
- Жаңы батареяны салыңыз: Insert a new battery of the same type, ensuring the positive (+) and negative (-) terminals are correctly aligned as indicated in the battery compartment.
- C жабыңызasing: Align the two halves of the remote control casing жана аларды ордуна бекем орногонго чейин бекем басыңыз.
This image displays the internal components of the remote, highlighting the battery compartment where the battery is installed.
Эски батареяларды жергиликтүү эрежелерге ылайык таштаңыз.
6. Кыйынчылыктарды
If you encounter issues with your remote control, refer to the following troubleshooting guide:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Пульт таптакыр иштебейт. | Өлгөн же аз батарея. Пульт диапазондон тышкары. Remote is not programmed. Opener power issue. | Replace the battery (see Section 5). Гараждын эшигин ачуучуга жакындаңыз. Re-program the remote (see Section 3). Check if the garage door opener has power. |
| Пульттун диапазону азайтылган. | Батарея аз. Интерференция. Opener antenna obstructed. | Батареяны алмаштырыңыз. Move away from sources of radio interference. Ensure the opener's antenna is hanging freely and not obstructed. |
| Garage door opens/closes by itself. | Пульттун баскычы тыгылып калган. Интерференция. Faulty opener. | Check remote buttons for sticking. Кыйынчылык булактарын аныктоо жана жок кылуу. Contact a qualified garage door technician. |
7. Техникалык шарттар
- Модел: 3973C
- Бөлүмдүн номери: 372310 (also known as 300643, 312962, 3BTM, 3BTM-0372, 3BTM-0372U, 3BTM-0372F, 3BTM-0372A, 327310, 302083)
- Жыштыгы: 372 МГц
- Баскычтар: 3
- Батарея түрү: 12V A23 (or equivalent)
- Өндүрүүчү: 3973C
The back of the remote control, featuring the belt clip and identification labels including the model number 3973C.
8. Кепилдик маалыматы
This product is typically covered by a manufacturer's limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary. Please refer to the original product packaging or contact the seller/manufacturer for specific warranty details. Keep your purchase receipt as proof of purchase.
9. Кардарларды колдоо кызматы
For further assistance, technical support, or to inquire about replacement parts, please contact the retailer or the manufacturer directly. Have your product model number (3973C) and purchase information ready when contacting support.
