AMD Wraith Stealth CPU Cooler Колдонуучу колдонмосу

1. Продукт бүтүп калдыview

The AMD Wraith Stealth CPU Cooler is designed to provide efficient cooling for AMD AM4 socket processors. It features an aluminum heatsink with a pre-applied thermal paste and a 3.5-inch (90mm) fan. This cooler is a reliable solution for maintaining optimal CPU temperatures, ensuring stable system performance.

• Supports Motherboard Socket: AM4
• Aluminum heatsink with pre-applied thermal paste
• Direct screw mounting to socket AM4 motherboard
• 3.5-inch 90mm fan
• 4-pin PWM power connector (approximately 9-inch length)

Figure 1: AMD Wraith Stealth CPU Cooler. This image shows the top-down view of the cooler, highlighting the fan blades and the AMD logo on the fan hub and shroud. The heatsink fins are visible beneath the fan.

2. Орнотуу жана орнотуу

Оптималдуу муздатуу иштеши үчүн туура орнотуу абдан маанилүү. Төмөнкү кадамдарды кылдаттык менен аткарыңыз:

1. Motherboard даярдоо: Ensure your motherboard has the AM4 socket and the original CPU retention module (backplate) is in place. The cooler utilizes this existing backplate for secure mounting.
2. Муздаткычты жайгаштырыңыз: Align the four spring-loaded screws on the cooler's base with the corresponding holes on the motherboard's backplate. The cooler comes with pre-applied thermal paste on its base, so no additional thermal compound is needed.
3. Муздаткычты камсыз кылуу: Gently press down on the cooler to engage the screws with the backplate. Use a Phillips head screwdriver to tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until they are snug. Do not overtighten. This ensures even pressure distribution and proper contact with the CPU.
4. Туташуу кубаты: Locate the 4-pin PWM fan header on your motherboard (often labeled "CPU_FAN"). Connect the cooler's 4-pin power cable to this header. This allows the motherboard to control the fan speed based on CPU temperature.

Note: The installation process involves handling delicate computer components. If you are unsure, consult a qualified technician.

3. Иштөө нускамалары

Once installed, the AMD Wraith Stealth CPU Cooler operates automatically. The 4-pin PWM (Pulse Width Modulation) connector allows your motherboard to dynamically adjust the fan speed based on the CPU's temperature. This ensures efficient cooling when needed and quieter operation during lighter loads.

• Automatic Fan Control: The fan speed will increase as the CPU temperature rises and decrease when the CPU cools down.
• BIOS/UEFI Орнотуулары: You can typically monitor CPU temperatures and fan speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. Advanced users may adjust fan curves in these settings, though the default automatic control is usually sufficient.

4. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө CPU муздаткычыңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылууга жардам берет.

• Чаңды тазалоо: Periodically inspect the heatsink fins and fan blades for dust accumulation. Dust can impede airflow and reduce cooling efficiency. Use compressed air to gently blow dust away from the heatsink and fan. Hold the fan blades in place while using compressed air to prevent over-spinning and potential damage to the fan bearings.
• Термикалык паста: The cooler comes with pre-applied thermal paste. If you ever remove the cooler, it is recommended to clean off the old thermal paste from both the CPU and the cooler's base and apply a fresh layer of high-quality thermal paste before reinstallation.

5. Кыйынчылыктарды

If you encounter issues with your CPU cooler, consider the following common problems and solutions:

• Жогорку CPU температурасы:
  • Check if the cooler is securely mounted and making proper contact with the CPU. Ensure all four screws are tightened evenly.
  • Verify that the fan is spinning. If not, check the 4-pin power connection to the motherboard.
  • Clean any dust accumulation from the heatsink and fan.
  • Ensure adequate airflow within your computer case.
• Fan Not Spinning or Erratic Speed:
  • Confirm the 4-pin power cable is correctly plugged into the "CPU_FAN" header on the motherboard.
  • Check BIOS/UEFI settings for fan control options. Ensure PWM control is enabled if available.
• Ашыкча желдеткич ызы-чуу:
  • Dust accumulation can cause noise; clean the fan and heatsink.
  • Эч кандай кабель вентилятордун линияларына тоскоол болбогонун текшериңиз.
  • If the noise is a grinding or rattling sound, the fan bearing might be failing, and replacement may be necessary.

6. Техникалык шарттар

7. Кепилдик жана колдоо

For warranty information and technical support regarding your AMD Wraith Stealth CPU Cooler, please refer to the official AMD website or contact AMD customer service directly. Keep your proof of purchase for warranty claims.

Расмий AMD колдоосу: www.amd.com/en/support