Introduction
The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.
Продукт өзгөчөлүктөрү
- Атомдук убакыттын тактыгы: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
- Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
- Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
- Зымсыз тышкы сенсор: Transmits outdoor temperature data to the main unit.
- Батарея менен иштейт: Operates on batteries for flexible placement (batteries not included).
- Жайкы убакытты (DST) автоматтык түрдө тууралоо: Automatically adjusts for daylight saving time changes.
- Тандалган убакыт алкактары: Allows selection of various US time zones.
- 12/24 саат форматы: Option to display time in either 12-hour or 24-hour format.
- Celsius/Fahrenheit Display: Switch between Celsius and Fahrenheit temperature units.
Пакеттин мазмуну
Орнотууну улантуудан мурун, бардык буюмдардын бар экенин текшериңиз.
- Sharp Atomic Clock Main Unit
- Зымсыз тышкы сенсор
- Instruction Manual
Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.
Жайгашуу
1. Батареяны орнотуу
- Негизги саат блогунун арткы жагындагы батарея бөлүмүн ачыңыз.
- Туура полярдуулукту (+ жана -) сактап, 2 AA батарейкасын салыңыз.
- Батарея уясынын капкагын жабыңыз.
- Open the battery compartment on the wireless outdoor sensor.
- Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
- Close the outdoor sensor's battery compartment cover.
2. Initial Synchronization and Settings
After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.
- Убакыт алкагы: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
- 12/24 саат форматы: Press the "12/24" button to switch between 12-hour and 24-hour display.
- Цельсий/Фаренгейт: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
- Сырткы сенсордун жупташуусу: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.
For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.
Операция
Маалыматты көрсөтүү
The clock's large LCD screen displays the following information:
- Убакыт: Current time in selected 12-hour or 24-hour format.
- PM көрсөткүчү: Displays "PM" for afternoon hours in 12-hour format.
- Атомдук сигнал индикатору: Shows the status of the WWVB atomic time signal reception.
- Ички температура: Учурдагы температура негизги бирдик менен өлчөнөт.
- Month/Date/Day: Current calendar information.
- Тышкы температура: Current temperature measured by the wireless outdoor sensor.
- Outdoor Sensor Channel: Indicates the channel the outdoor sensor is transmitting on.
- Батарея аз индикатор: An icon will appear when batteries are low and need replacement.
Button Functions (Rear Panel)
| баскыч | Функция |
|---|---|
| КАЛЕНДАРИ | Press and hold for 2 seconds to manually set calendar (Year, Month, Date, Language). Use UP/DOWN buttons to change values. |
| TIME | Press and hold for 2 seconds to manually set time (DST ON/OFF, Hour, Minute). Use UP/DOWN buttons to change values. |
| 12/24 | Switches between 12-hour and 24-hour time display. |
| КАНАЛ | Press to switch between outdoor sensor channels (1, 2, 3). Press and hold for 2 seconds to pair with the outdoor sensor. |
| ° C / ° F | Celsius жана Fahrenheit температура дисплейинин ортосунда которулат. |
| WAVE | Initiates a manual search for the WWVB atomic time signal. |
| RESET | Resets the clock to factory default settings. Requires a pointed object (e.g., paperclip). |
| UP / TIME ZONE | Increases values during manual setting. Press to cycle through time zones. |
| ылдый | Decreases values during manual setting. |
Техникалык тейлөө
- Батареяны алмаштыруу: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
- Тазалоо: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Сырткы сенсорду жайгаштыруу: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.
Проблемаларды чечүү
- Clock not syncing with atomic time:
- Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
- Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
- Press the "WAVE" button to initiate a manual signal search.
- Баштапкы синхрондоштуруу үчүн 24 саатка чейин убакыт бериңиз.
- Outdoor temperature not displaying or incorrect:
- Check batteries in the outdoor sensor.
- Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
- Press the "CHANNEL" button on the main unit to re-establish connection.
- Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
- Дисплей күңүрт же бош:
- Replace all batteries in the main unit with fresh ones.
- Батареялар туура полярдуулук менен салынганын текшериңиз.
- Туура эмес убакыт же дата:
- Туура убакыт алкагы тандалганын текшериңиз.
- Check if Daylight Saving Time (DST) setting is correct for your region.
- If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Sharp |
| Модель номери | 8541848315 |
| UPC | 049353998732 |
| Түс | Black Gloss |
| Дисплей түрү | Санарип LCD |
| Өзгөчө өзгөчөлүк | Atomic Time Synchronization (WWVB), Indoor/Outdoor Temperature |
| Продукциянын өлчөмдөрү | 13"W x 1.5"H (Main Unit) |
| Power Source | Батарея менен иштейт |
| Керектүү батарейкалардын саны | Main Unit: 2 AA; Outdoor Sensor: 2 AA |
| Материал | Пластик |
| Монтаж түрү | Wall Mount / Tabletop Stand |
| Ички/тышкы колдонуу | Indoor (Main Unit), Outdoor (Sensor) |
Кепилдик жана колдоо
Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.





