Seitron Magitime Wireless Programmable Thermostat Kit KCR006
Колдонуучунун инструкциясы
1. Киришүү
The Seitron Magitime Wireless Programmable Thermostat Kit, model KCR006, provides advanced temperature control for your heating or cooling system. This kit consists of a battery-powered wireless thermostat and a single-channel receiver designed to control your boiler. The system utilizes an 868 MHz radio frequency for reliable communication, offering a range of up to 50 meters in standard building environments. This design allows for flexible installation without the need for extensive wall wiring.
This manual provides essential information for the proper installation, operation, and maintenance of your Seitron Magitime kit. Please read it thoroughly before use.
2. Коопсуздук маалыматы
- Always disconnect power to the heating/cooling system before installing or servicing the receiver.
- Эгерде сиз электр зымдарын так билбесеңиз, орнотууну квалификациялуу техник аткарышы керек.
- Термостатты же кабыл алгычты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
- Use only the specified battery type for the thermostat.
- Балдар жетпеген жерде сактаңыз.
3. Пакеттин мазмуну
Пакетте бардык компоненттер бар экенин текшериңиз:
- Seitron Magitime Wireless Programmable Thermostat (DCW 01B)
- Wireless Receiver (DRR 01M)
- Thermostat mounting base
- Instruction Manual
- Batteries (may be included or sold separately)
4. Продукт бүтүп калдыview
The Seitron Magitime kit comprises two main units: the wireless thermostat and the wireless receiver. The thermostat allows you to set and program your desired temperature, while the receiver connects to your heating/cooling system to execute commands received from the thermostat.
This image displays the Seitron Magitime Wireless Programmable Thermostat (left, labeled DCW 01B) and its accompanying Wireless Receiver (right, labeled DRR 01M). The thermostat features a digital display showing '16.4' and control buttons on the sides. A green plus sign indicates they are a kit.
4.1. Wireless Thermostat (DCW 01B)
- Санариптик дисплей: Shows current temperature, set temperature, time, and program status.
- Башкаруу баскычтары: Used for setting temperature, programming, and mode selection.
- Батарея бөлүмү: Located on the back for power supply.
4.2. Wireless Receiver (DRR 01M)
- Статус көрсөткүчтөрү: LEDs to show power, communication, and relay status.
- Жупташтыруу баскычы: Used to establish communication with the thermostat.
- Терминал блогу: For connection to the boiler/heating system.
5. Орнотуу
5.1. Кабылдагычты орнотуу
- Электр энергиясын өчүрүү: Ensure the main power to your heating/cooling system is turned off at the circuit breaker.
- Монтаждоо: Mount the receiver in a suitable location near your boiler, away from large metal objects that could interfere with radio signals.
- Зымдар: Connect the receiver to your boiler's control terminals according to the wiring diagram provided in the separate installation guide (not included in this manual). Ensure correct polarity and secure connections.
- Кубат туташуу: Restore power to the heating/cooling system. The receiver's power indicator LED should illuminate.
5.2. Thermostat Setup
- Батареяны салуу: Open the battery compartment on the back of the thermostat and insert the required batteries, observing correct polarity. The display should power on.
- Монтаждоо: Place the thermostat on its mounting base in a central location within the heated area, away from direct sunlight, drafts, or heat sources.
- Баштапкы жупташтыруу:
- On the receiver, press and hold the pairing button until its pairing LED starts flashing.
- On the thermostat, access the pairing menu (refer to the specific button sequence in the full product manual).
- Once paired, the receiver's pairing LED will stop flashing and remain solid, and the thermostat will indicate successful connection.
- Дата жана убакыт орнотуу: Set the current date and time on the thermostat using the control buttons.
6. Иштөө нускамалары
6.1. Basic Temperature Setting
- In normal operating mode, use the UP/DOWN buttons to adjust the desired temperature. The new setting will be active until the next programmed event or manual override.
6.2. Mode Selection (Heating/Cooling)
- Press the MODE button (or similar, refer to your specific model's button layout) to cycle through available modes: Heating, Cooling, Auto, Off. Select the appropriate mode for your system.
6.3. Апталык графикти программалоо
The Magitime thermostat allows for weekly programming to optimize energy consumption.
- Программа режимине кириңиз: Press the PROGRAM button (or similar) to enter the scheduling interface.
- Күн тандоо: Use navigation buttons to select the day of the week you wish to program.
- Убакыт мезгилдерин жана температураларды коюңуз: For each day, you can typically set multiple time periods with corresponding desired temperatures. Adjust the start time and temperature for each period.
- Copy Programs: Some models allow copying programs from one day to another.
- Программа режиминен чыгуу: Save your settings and exit program mode. The thermostat will now follow the set schedule.
6.4. Өркүндөтүлгөн функциялар
Refer to the comprehensive product manual for details on advanced functions such as holiday mode, anti-freeze protection, and calibration settings.
7. Техникалык тейлөө
7.1. Батареяны алмаштыруу
- When the low battery indicator appears on the thermostat display, replace the batteries promptly.
- Термостаттын артындагы батарея бөлүкчөсүн ачыңыз.
- Remove old batteries and insert new ones, ensuring correct polarity.
- Эски батареяларды жергиликтүү эрежелерге ылайык таштаңыз.
7.2. Тазалоо
- Clean the thermostat and receiver surfaces with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the units.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Термостаттын дисплейи бош. | Өлгөн батареялар. | Батареяларды алмаштырыңыз. |
| Жылытуу/Муздатуу системасы жооп бербейт. | No communication between thermostat and receiver; Receiver not powered; Incorrect wiring. | Check receiver power; Re-pair thermostat and receiver; Verify wiring connections. |
| Температураны окуу туура эмес көрүнөт. | Thermostat placed in an unsuitable location (draft, direct sun); Calibration needed. | Relocate thermostat; Refer to manual for calibration instructions. |
| Receiver status LED is off. | Ресиверге электр кубаты берилбейт. | Check power supply to the receiver and circuit breaker. |
Эгер бул жерде көрсөтүлбөгөн маселелерге туш болсоңуз же чечимдер көйгөйдү чечпесе, кардарларды колдоо кызматына кайрылыңыз.
9. Техникалык шарттар
| Бренд | СЕЙТРОН |
| Модель номери | KCR006 |
| Продукциянын өлчөмдөрү (L x W x Y) | 13.2 x 3.1 x 8.7 см |
| Элемент Салмагы | 450 грамм |
| Материал | Пластик |
| Байланыш технологиясы | Radio (868 MHz) |
| Power Source | Battery powered (Thermostat) |
| Дисплей түрү | Санарип |
| Башкаруу ыкмасы | тийүү |
| Controller Type | Баскыч |
| Температураны көзөмөлдөө түрү | Алыстан башкаруу |
| Камтылган компоненттер | Thermostat, wireless receiver |
10. Кепилдик жана колдоо
Берилген өнүм маалыматтарында өнүмгө кепилдик жана кардарларды колдоо жөнүндө маалымат жок болчу. Сураныч, өнүмдүн таңгагына же өндүрүүчүнүн расмий өкүлүнө кайрылыңыз. webдеталдуу кепилдик шарттары жана техникалык колдоо үчүн байланыш маалыматы үчүн сайт.





