Dayton Audio DTA-PRO

Dayton Audio DTA-PRO 100W Class D Bluetooth Amplifier Колдонмо

Model: DTA-PRO

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Dayton Audio DTA-PRO 100W Class D Bluetooth Amplifier. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your audio experience.

Dayton Audio DTA-PRO Ampкөтөргүч, алдыңкы жагы бурчтуу view

Сүрөт: бурчтуу алдыңкы view of the Dayton Audio DTA-PRO ampкөтөргүч, көрсөтүүчүasing анын компакттуу дизайны жана алдыңкы панелди башкаруу.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

Dayton Audio DTA-PRO Ampкөтөргүч жана аксессуарлар

Image: The DTA-PRO amplifier, remote control, power adapter, power cord, and Bluetooth antenna included in the package.

Эскертүү:

The included power supply is capable of driving this amplifier at 2 x 40 watts per channel. To achieve the full potential of this amplifier (>50 watts per channel), a 24V 5A power supply capable of producing 120 watts of total output is recommended.

Жайгашуу

1. Connect Speakers

Connect your passive speakers to the speaker terminals on the rear panel of the DTA-PRO. Ensure correct polarity (+ to + and - to -) for each channel (Left and Right).

Rear panel of Dayton Audio DTA-PRO showing speaker terminals

Image: Rear panel connections, including speaker terminals for left and right channels, and the power input.

2. Connect Audio Sources

The DTA-PRO offers multiple input options:

Connect your desired audio source cables to the corresponding input ports on the rear panel.

Деталдаштырылган view of rear panel audio input ports

Image: Close-up of the rear panel showing AUX, Optical, Coaxial, and PC-USB input ports.

3. Connect Subwoofer (Optional)

If using an active subwoofer, connect it to the "SUB OUT" port on the rear panel.

4. Attach Bluetooth Antenna

Screw the included Bluetooth antenna onto the "ANT" connector on the rear panel for optimal wireless reception.

5. Кубатты туташтырыңыз

Connect the power adapter to the "DC 24V" input on the rear panel, then plug the power cord into a wall outlet.

Иштөө нускамалары

Күйгүзүү/өчүрүү

басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button on the front panel or the power button on the remote control to turn the ampөмүрдү күйгүзүү же өчүрүү.

Front panel of Dayton Audio DTA-PRO ampөмүрлүү

Image: Front panel of the DTA-PRO, showing the volume knob, input select button, and power button.

Киргизүүнү тандоо

басыңыз ТАНДОО алдыңкы панелдеги баскычты же КИРҮҮ ТАНДОО button on the remote to cycle through available audio inputs (Bluetooth, AUX, Optical, Coaxial, PC-USB). The active input will be displayed on the front panel screen.

Үндү көзөмөлдөө

Rotate the large knob on the front panel or use the VOL+ / VOL- үндүн деңгээлин тууралоо үчүн пульттун баскычтары.

Tone Controls and EQ

Use the remote control to access tone adjustments:

Dayton Audio DTA-PRO remote control

Image: The infrared remote control for the DTA-PRO, showing buttons for power, volume, input select, EQ, bass/treble, loudness, and direct mode.

Bluetooth Жупташтыруу

  1. Select Bluetooth as the input source. The front display will indicate "BT".
  2. On your Bluetooth device, search for "Dayton Audio DTA-PRO" and select it to pair.
  3. Once paired, the display will show a stable Bluetooth connection.

DAC Сampling Rate Indication

The front panel features indicator LEDs that display the sampling rate of the incoming digital audio signal (e.g., 44.1K, 48K, 88.2K, 96K, 176.4K, 192K).

Техникалык тейлөө

Проблемаларды чечүү

Көйгөй Мүмкүн себеп Чечим
Күч жок Power cord not connected; power outlet not active; unit off. Check power connections; try a different outlet; press power button.
Үн жок Incorrect input selected; volume too low; speaker wires disconnected; source device not playing. Select correct input; increase volume; check speaker connections; verify source playback.
Бурмаланган үн Volume too high; poor source quality; incorrect speaker impedance. Reduce volume; try a different source; ensure speakers are compatible.
Bluetooth туташпай жатат AmpКөтөргүч жупташтыруу режиминде эмес; түзмөк өтө алыс; тоскоолдук. Ensure BT input is selected; move device closer; restart ampкөтөргүч жана түзүлүш.
Укмуш ызы-чуу Ground loop issue; faulty cable; proximity to other electronics. Try isolating power; use shielded cables; move away from interference sources.
Optical input not working / static noise Faulty optical cable; incorrect source settings; ampкөтөргүч маселеси. Check optical cable connection and integrity; ensure source device is outputting optical audio; try a different optical cable.
Right channel audio intermittent or dead Loose speaker connection; faulty speaker; internal ampкөтөргүч маселеси. Verify speaker wire connections; test with a different speaker; if problem persists, contact support.

Техникалык шарттар

Кепилдик маалымат

For specific warranty details, please refer to the warranty card included with your product or visit the official Dayton Audio webсайт. Кепилдиктин шарттары, адатта, сатып алынган күндөн тартып белгилүү бир мезгил ичинде өндүрүш кемчиликтерин камтыйт.

Колдоо

If you encounter any issues not covered in this manual or require further assistance, please contact Dayton Audio customer support. You can find contact information on the official Dayton Audio webсайт:

www.daytonaudio.com

Тектеш документтер - DTA-PRO

Preview Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier Колдонмо
User manual for the Dayton Audio DTA-2.1BT2, a 100W 2.1 Class D Bluetooth amplifier with subwoofer frequency adjustment. Includes setup, connections, and specifications.
Preview Dayton Audio DTA-100ST 100W Desktop Stereo AmpBluetooth 5.0 Колдонуучу колдонмосу менен көтөргүч
User manual for the Dayton Audio DTA-100ST, a 100W desktop stereo amplifier with Bluetooth 5.0. Includes safety information, features, package contents, controls, operation, specifications, and warranty details.
Preview Dayton Audio KAB-100Mv2 100W Class D Ampliifier Board Quick Start Wiring Guide
Quick start wiring guide for the Dayton Audio KAB-100Mv2, a 100W Class D amplifier board featuring aptX HD Bluetooth 5.0. Details included components, functional cables, LED indicators, and board connections.
Preview Dayton Audio KAB-250v4 2x50W Class D Bluetooth Ampliifier Board Quick Start Wiring Guide
Dayton Audio KAB-250v4 2x50W Class D Аудио үчүн тез баштоо зымдары колдонмосу Amp5.0 Bluetooth менен көтөрүүчү такта. Чоо-жайы элементтерди, кабелдик пакеттерди, LED көрсөткүчтөрүн, кошумча портторду жана динамик чыгаруу байланыштарын камтыйт.
Preview Dayton Audio HTA200 200W Integrated Stereo Hybrid Tube Amplifier Колдонмо
Comprehensive user manual for the Dayton Audio HTA200, a 200W integrated stereo hybrid tube amplifier. Learn about its features, connections, controls, troubleshooting, and specifications for optimal audio performance.
Preview Dayton Audio HTA100 Integrated Stereo Hybrid Tube Amplifier Колдонмо
Comprehensive user manual for the Dayton Audio HTA100, a 100W integrated stereo hybrid tube amplifier. Learn about setup, connections, features, troubleshooting, and specifications.