Antec Dark Avenger DA601 E-ATX орто мунара корпусунун колдонуучу колдонмосу

1. Киришүү

1.1 About Your Antec DA601 Case

The Antec Dark Avenger DA601 is an E-ATX mid-tower PC case designed for high-performance gaming systems. It features an ARGB front panel with integrated LED strips, a tempered glass side panel for showcasing internal components, and includes a Prizm 120 ARGB fan for enhanced cooling and aesthetics. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DA601 case, ensuring optimal performance and longevity.

2. Продукт бүтүп калдыview

2.1 Негизги өзгөчөлүктөрү

• ARGB Front Panel: Features 4 LED strips on the front panel, easily controlled by a single button or motherboard synchronization.
• Pre-Installed ARGB Fan: Includes one Prizm 120 ARGB fan for improved thermal performance and customizable lighting.
• Толук экран View: A crystal-clear tempered glass side panel allows for a complete view of your internal PC components.
• High Water-Cooling Capability: менен иштелип чыккан ample space to support both All-In-One (AIO) and custom liquid cooling configurations.
• Inbuilt LED Controller: Connects to a 3-pin header on the motherboard for 16.8 million custom color options and synchronization.

2.2 Component Layout and Compatibility

Familiarize yourself with the internal layout and component compatibility of the Antec DA601 case before beginning assembly.

Сүрөт 2.1: Алдыңкы-сол view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, showcasing the ARGB front panel and tempered glass side panel.

2.2-сүрөт: үстүнкү алдыңкы view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, highlighting the top ventilation and front panel I/O ports.

Figure 2.3: Diagram illustrating the internal component layout and compatibility of the Antec DA601 case, including motherboard, GPU, CPU cooler, PSU, and storage drive locations.

3. Орнотуу нускамалары

Follow these steps to assemble your PC components within the Antec DA601 case.

3.1 Ишти даярдоо

1. Корпусту туруктуу, тегиз бетке коюңуз.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, protected surface.
3. Кабелди башкаруу аймагына жетүү үчүн карама-каршы металл каптал панелди алып салыңыз.

3.2 Motherboard орнотуу

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX, ATX, Micro-ATX, ITX).
2. I/O калканын корпустун арткы тешигине коюңуз.
3. Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.

3.3 Электр менен камсыздоо блогун (PSU) орнотуу

1. Mount your PSU into the designated bay at the bottom rear of the case.
2. PSUну корпустун артындагы бурамалар менен бекитиңиз.

3.4 Сактоочу дискти орнотуу

• 2.5" SSD: Mount SSDs onto the dedicated SSD trays located behind the motherboard tray. Secure them with screws.
• 3.5" HDD: Install HDDs into the removable drive cages located in the PSU shroud area. Slide them into place and secure with screws or tool-less mechanisms if available.

3.5 Видеокартаны жана кеңейтүү картасын орнотуу

1. Керектүү PCIe уячасынын капкактарын корпустун арткы бөлүгүнөн алып салыңыз.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on your motherboard.
3. Карталарды бурамалар менен бекитиңиз.

3.6 Кабелди башкаруу

Utilize the cable routing grommets and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.

3.7 Connecting Front Panel I/O

Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED, ARGB headers) to their corresponding pins on your motherboard. Refer to your motherboard manual for exact pin locations.

4. Иштөө нускамалары

4.1 Күйгүзүү

After all components are installed and cables are connected, ensure the PSU switch is in the 'ON' position. Press the power button on the top panel of the case to start your system.

4.2 ARGB Жарыкты башкаруу

The Antec DA601 features addressable RGB (ARGB) lighting on the front panel and includes an ARGB fan. You can control these lights in two ways:

• Алдыңкы панелдин баскычы: Press the dedicated LED control button on the top panel of the case to cycle through various lighting modes and colors.
• Энелик платаны синхрондоштуруу: If your motherboard supports ARGB (5V 3-pin header), connect the case's ARGB cable to the motherboard. You can then control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. Техникалык тейлөө

Компьютериңиздин компоненттеринин иштөө мөөнөтүн узартууга жана үзгүлтүксүз техникалык тейлөө анын оптималдуу иштешин камсыз кылууга жардам берет.

5.1 Тазалоо

• Чаң чыпкалары: Periodically remove and clean the magnetic dust filters located on the top, front, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
• Ички иштер: With the system powered off and unplugged, use compressed air to gently remove dust from internal components such as fans, heatsinks, and circuit boards.
• Сырткы: Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.

5.2 Аба агымын оптималдаштыруу

Ensure that the case's ventilation areas are not obstructed. Proper cable management contributes to better airflow, preventing heat buildup inside the case.

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.

6.1 Күч жок

• Кубат кабели PSUга да, розеткага да бекем туташтырылганын текшериңиз.
• Ensure the PSU's power switch is in the 'ON' position.
• Алдыңкы панелдеги кубат которгучунун кабели энелик платанын кубат которгучуна туура туташкандыгын текшериңиз.

6.2 Fans Not Spinning

• Confirm that all fan power cables are securely connected to the motherboard or a fan controller.
• Check BIOS/UEFI settings to ensure fan control is enabled and configured correctly.

6.3 ARGB Lights Not Working

• Ensure the ARGB cables from the front panel and fan are correctly connected to the case's inbuilt LED controller or directly to a 5V 3-pin ARGB header on your motherboard.
• If using motherboard sync, verify that your motherboard's RGB software is installed and configured correctly.
• Try cycling through modes using the front panel LED button to rule out software issues.

6.4 Ашыкча ысып кетүү маселелери

• Ensure all case fans are spinning and oriented correctly for optimal airflow (intake/exhaust).
• Чаң чыпкаларын жана ички компоненттерди "Техникалык тейлөө" бөлүмүндө сүрөттөлгөндөй тазалаңыз.
• CPU муздаткычынын жана GPU желдеткичтеринин туура иштеп жатканын текшериңиз.

7. Техникалык шарттар

8. Кепилдик маалыматы

Antec provides a limited warranty for the Dark Avenger DA601 E-ATX Mid Tower Case. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and the claims process, please visit the official Antec website or contact your local Antec distributor.

9. Колдоо

Should you require technical assistance, have questions about your product, or need customer service, please utilize the following resources:

• Official Antec Webсайт: Visit www.antec.com продукт жөнүндө маалымат, көп берилүүчү суроолор жана колдоо кызматынын байланыш маалыматтары үчүн.
• Кардарларды тейлөө: Refer to the 'Contact Us' section on the Antec website for regional customer support phone numbers or email addresses.