1. Киришүү
This manual provides essential information for the safe and efficient operation of your Telwin Dynamic 520 Battery Charger and Starter. The Dynamic 520 is designed for charging free electrolyte (WET) batteries with 12V or 24V voltage and for starting various vehicles, including cars, vans, and light trucks.
Сураныч, аппаратты иштетүүдөн мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.
Figure 1: Telwin Dynamic 520 Battery Charger and Starter. This image shows the front and side view of the red and black unit, featuring a handle at the top, control panel, and wheels for portability.
2. Коопсуздук маалыматы
Травматизмди же түзүлүшкө зыян келтирбөө үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Жумуш аймагы жакшы желдетилип турушун камсыз кылыңыз.
- Тиешелүү жеке коргоочу шаймандарды, анын ичинде көздү жана кол каптарды кийиңиз.
- Do not operate the charger in damp же нымдуу шарттар.
- Disconnect the unit from the main power supply before making any connections or disconnections to the battery.
- Батареяны кыска туташуудан сактаныңыз clamps.
- The unit is equipped with protection against overloads and polarity reversal. However, always ensure correct polarity when connecting to a battery.
- Балдарды жана уруксаты жок адамдарды операциялык аймактан алыс кармаңыз.
3. Орнотуу жана орнотуу
3.1 Пакеттен чыгаруу
Carefully remove the Telwin Dynamic 520 from its packaging. Inspect the unit for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 Орнотуу
Place the unit on a stable, level surface. Ensure adequate clearance around the unit for ventilation. The unit dimensions are 365x460x755 mm and it weighs 21 Kg, so consider its size and weight when choosing a location.
3.3 Электрдик туташуу
Connect the unit to a 230V 50/60Hz 1-phase main voltage supply. Ensure the power outlet is properly grounded and capable of handling the absorbed power of 1.6 kW for charging and 10 kW for starting.
4. Иштөө нускамалары
4.1 Батареяга туташтыруу
- Ensure the Telwin Dynamic 520 is disconnected from the main power supply.
- Батареядагы оң (+) жана терс (-) терминалдарды аныктаңыз.
- Кызыл (+) cl туташтырыңызamp заряддагычтан батареянын оң (+) терминалына чейин.
- Кара (-) cl туташтырыңызamp from the charger to the negative (-) terminal of the battery. For vehicles, connect the black clamp to a metal part of the vehicle chassis, away from the battery and fuel line.
- Бардык байланыштар коопсуз экенин текшериңиз.
4.2 Батареяны заряддоо
The Dynamic 520 supports charging of 12V and 24V WET batteries with a rated reference capacity of 20 to 1000 Ah.
- Select the desired charge voltage (12V же 24V) тtage селектор которгуч.
- Choose between "Normal Charge" or "Quick Charge (BOOST)" using the mode selector.
- If using "Quick Charge," you may set the timer for the quick charge duration.
- Агрегатты негизги электр булагына туташтырыңыз.
- Monitor the charging current displayed on the unit. The rated charge current is 50A, with a maximum charge current of 75A.
- The unit has 4 adjustment positions for fine-tuning the charging process.
4.3 Тез баштоо функциясы
The quick start function provides a high current burst to assist in starting vehicles with discharged batteries.
- Ensure the battery is connected as described in Section 4.1.
- Select the "Quick Start" mode on the unit.
- Агрегатты негизги электр булагына туташтырыңыз.
- Attempt to start the vehicle. Do not crank the engine for more than 5 seconds at a time, and allow a 1-minute cool-down period between attempts.
- Monitor the starting current displayed on the unit. The starting peak current is 400A, with a rated starting current of 300A.
- Once the vehicle starts, disconnect the unit from the main power supply, then disconnect the clamps from the vehicle/battery in reverse order of connection.
5. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Telwin Dynamic 520.
- Тазалоо: Disconnect the unit from power before cleaning. Use a dry, soft cloth to wipe down the exterior. Do not use abrasive cleaners or solvents.
- Сактагыч: Store the unit in a dry, cool place, away from direct sunlight and moisture. Ensure cables are neatly coiled to prevent damage.
- Кабелдик текшерүү: Электр шнурун жана батарейканы мезгил-мезгили менен текшерип туруңузamps for any signs of wear, cuts, or damage. Replace damaged components immediately.
- Ички коргоо: The unit features built-in protection against overloads and polarity reversal, minimizing the risk of internal damage from common operational errors.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your Telwin Dynamic 520.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Түзмөк күйбөйт. | No main power supply; faulty power cord; internal fuse. | Check power outlet and cord. Consult a qualified technician if the issue persists. |
| Батарея заряддалбай жатат. | Incorrect battery connection (polarity reversal); battery deeply discharged; incorrect voltage selection; overload protection activated. | Verify correct polarity. Ensure battery is not excessively discharged. Select correct 12V/24V setting. Allow unit to cool if overload protection is active. |
| Vehicle not starting with Quick Start. | Battery too weak; poor connections; engine issues unrelated to battery. | Ensure strong, clean connections. Allow battery to charge for a few minutes before attempting start. Consult vehicle mechanic if engine issues are suspected. |
| Overload protection activates frequently. | Attempting to charge/start a battery too large for the unit; short circuit in connections. | Ensure battery capacity is within the unit's rated reference capacity (20-1000 Ah). Check for short circuits. |
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | Telwin |
| Type | Батарея заряддагыч жана Стартер |
| Модел | Динамикалык 520 |
| Негизги томtage | 230V 50/60Hz 1-phase |
| Charge Absorbed Power | 1.6 кВт |
| Start Absorbed Power | 10 кВт |
| Charge / Starter Voltage | 12В - 24В |
| Максималдуу заряд агымы | 75 А |
| Номиналдуу заряд ток | 50 А |
| Rated Starting Current | 300 А |
| Чоку токтун башталышы | 400 А |
| Rated Reference Capacity | 20 / 1000 Ah |
| Adjustment Positions | 4 |
| Өлчөмдөрү (LxWxH) | 365 x 460 x 755 мм |
| Салмагы | 21 кг |
8. Кепилдик маалыматы
Telwin products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Telwin webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
9. Кардарларды колдоо кызматы
If you require technical assistance, have questions about operation, or need to report a fault, please contact Telwin customer service or your authorized dealer. Provide the product model (Dynamic 520) and serial number (if applicable) when contacting support.
For the most up-to-date contact information, please visit the official Telwin webсайт.
