Introduction
This user manual provides comprehensive instructions for the Behringer A800 Power Amplifier, a professional 800-watt reference class power amplifier designed for studio and live sound applications. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Кутуда эмне бар
- Берингер А800 кубаттуулугу Ampөмүрлүү
- Электр кабели
- Колдонуучунун Колдонмосу (бул документ)
Жайгашуу
Before connecting your Behringer A800, ensure all audio equipment is powered off. Proper setup is crucial for safe and effective operation.
Front Panel Overview
Figure 1: Front Panel of Behringer A800 Power Ampөмүрлүү
The Behringer A800 Power Amplifier features a clean front panel design. On the left is the volume control for Channel A, and on the right is the volume control for Channel B. In the center, an illuminated LED display provides visual feedback on signal levels, including protection, clip, and output indicators for both channels. The model name 'REFERENCE AMPLIFIER A800' is clearly visible below the display.
Байланыштар
- Кубат туташуу: Берилген электр кабелин туташтырыңыз amplifier's AC inlet and then to a suitable power outlet. Ensure the ampТуташтыруудан мурун, көтөргүчтүн кубат которгучу ӨЧҮРҮЛГӨН абалда болушу керек.
- Киргизүү байланыштары: The A800 supports various input options. Connect your audio source (e.g., mixer, audio interface) to the amplifier's input jacks using appropriate cables (XLR or TRS).
- Чыгуу туташуулары: Пассивдүү динамиктериңизди туташтырыңыз amplifier's output terminals. Ensure correct polarity (+ to + and - to -) for each speaker. The A800 supports both stereo and bridged mono operation. Refer to the rear panel diagram (not shown in image, but implied) for specific output configurations.
- Негиздөө: For optimal performance and to minimize hum, ensure all connected equipment is properly grounded.
Иштөө нускамалары
Once properly set up, the Behringer A800 is ready for operation. Follow these guidelines for safe and effective use.
- Күйгүзүү/өчүрүү: After all connections are made, switch on your audio source first, then power on the A800. When powering down, switch off the A800 first, then your audio source.
- Үндү көзөмөлдөө: Use the dedicated volume knobs for Channel A and Channel B to adjust the output level. Start with the volume at its minimum setting and gradually increase to the desired listening level.
- LED Metering: The central LED display provides real-time visual feedback on signal levels. Green LEDs indicate signal presence, while red LEDs (CLIP) indicate signal clipping, which should be avoided to prevent distortion and potential speaker damage. The PROT LED indicates protection mode.
- Stereo and Bridged Mono Operation: The A800 can operate in stereo mode (two independent channels) or bridged mono mode (combining both channels for higher power output to a single speaker). Consult the rear panel markings and the full technical specifications for details on switching modes.
- Ашыкча жүктөн коргоо: The amplifier features built-in overload protection circuitry to safeguard itself and connected speakers from excessive signal levels.
- Convection Cooling: The A800 utilizes convection cooling, meaning it does not have internal fans. Ensure adequate airflow around the unit to prevent overheating.
Техникалык тейлөө
Regular maintenance helps ensure the longevity and optimal performance of your Behringer A800 Power Ampөмүрлүү.
- Тазалоо: ажыратыңыз amplifier from power before cleaning. Use a soft, dry cloth to wipe down the exterior. Avoid using abrasive cleaners, solvents, or waxes, as they can damage the finish.
- Вентиляция: Желдетүү тешиктери amplifier are not blocked. As the A800 uses convection cooling, proper airflow is essential to dissipate heat. Do not place the unit in an enclosed space without adequate ventilation.
- Сактагыч: сакталган болсо amplifier for an extended period, keep it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Кабелдик текшерүү: Periodically inspect all audio and power cables for any signs of wear or damage. Replace damaged cables immediately.
Проблемаларды чечүү
If you encounter issues with your Behringer A800 Power Ampкөтөргүч, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн чыгышы жок |
|
|
| Бурмаланган же түшүнүксүз үн |
|
|
| Күңүрт же ызылдаган үн |
|
|
| Ampкөтөргүч ысып кетет |
|
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Берингер |
| Модел | A800 |
| Чыгуу күчү | 800 Ватт |
| Каналдардын саны | 2 |
| Элементтин өлчөмдөрү (L x W x Y) | 23.05 x 10.65 x 6.25 дюйм |
| Элемент Салмагы | 8.8 фунт |
| Тtage | 24 вольт (ток) |
| Монтаж түрү | Surface Mount |
| UPC | 653341317834 |
| Биринчи жеткиликтүү күн | 18-январь, 2019-жыл |
Кепилдик жана колдоо
Behringer products are manufactured to high quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Behringer webсайт.
For technical support, service, or parts, please contact Behringer customer service. Contact information can typically be found on the Behringer webсайтында же продуктунун таңгагында.
Онлайн ресурстар: For the most up-to-date information, FAQs, and additional resources, please visit the official Behringer webсайт: www.behringer.com
