Bars BARSH1S1L91

H1S1L-27 баш прокладкасынын агып кетүүсүн токтотуучу 600 мл колдонуу боюнча колдонмо

Бренд: Bars | Модел: BARSH1S1L91

1. Продукт бүтүп калдыview

The Bars Head Gasket Sealant and Repair Additive is designed to address leaks in engine cooling systems, specifically targeting blown or damaged cylinder head gaskets. This 600ml formula contains a combination of anti-freeze sodium silicate (liquid glass) and various sized sealing particles. These components work to penetrate gaps and crevices in the engine block and cooling system near the combustion chamber, forming a seal.

This product is intended for use in vehicles that do not exhibit severe overheating or require frequent coolant top-ups after short periods of engine operation (15-30 minutes).

Bars Head Gasket Stop Leak & Block Repair bottle

Сүрөт 1.1: Bars Head Gasket Stop Leak & Block Repair 600ml bottle. This image displays the front label of the product, highlighting its primary function as a head gasket and block repair solution.

2. Коопсуздук маалыматы

  • Абайлаңыз: Always exercise extreme caution when working near an engine. Engine components can reach high temperatures and cause severe burns.
  • Вентиляция: Жабык мейкиндикте иштегенде жетиштүү желдетүүнү камсыз кылыңыз.
  • Көздү жана терини коргоо: Wear appropriate eye protection and gloves to prevent contact with the product. In case of contact, rinse thoroughly with water.
  • Жутуу: Жутпаңыз. Эгерде жутуп алса, дароо медициналык жардамга кайрылыңыз.
  • Сактагыч: Keep out of reach of children and pets. Store in a cool, dry place.
  • Шайкештик: This product is not suitable for cooling systems with a capacity of 3 liters or less.

3. Даярдоо жана колдонуу

  1. Кыймылдаткычтын абалы: Ensure the engine is cool before beginning the application process.
  2. Жакшы чайкагыла: Shake the entire bottle of Bars Head Gasket Sealant thoroughly before use to ensure proper mixing of components.
  3. Муздаткычтын деңгээлин текшерүү: Check the current coolant level. If the cooling system is already full, it may be necessary to drain a small amount of existing coolant to accommodate the entire 600ml bottle of product.
  4. Продукт кошуу: Add the entire contents of the bottle directly into the vehicle's radiator. If direct access to the radiator is not possible, the product can be added via the radiator hose or the pressurized overflow tank.
  5. Дозалоо: One 600ml bottle treats up to 10 liters of coolant. Ensure the entire bottle is used for optimal results.
Back of Bars Head Gasket Stop Leak bottle with multi-language instructions

Сүрөт 3.1: Back of Bars Head Gasket Stop Leak bottle. This image shows the detailed instructions and warnings printed on the back label, including multi-language information.

4. Иштөө нускамалары

  1. Initial Engine Run: Start the engine and allow it to run until it reaches its normal operating temperature.
  2. Муздатуу: Once normal operating temperature is reached, switch off the vehicle and allow the engine to cool down completely.
  3. High Idle Run: Restart the vehicle and run the engine at a high idle for approximately 15 minutes. This helps circulate the product and facilitate the sealing process.
  4. Final Cool Down & Top-Up: Turn the vehicle off again and allow it to cool down. After cooling, check the coolant level and top up the radiator with appropriate coolant if necessary.

5. Maintenance and Ongoing Protection

When used correctly, Bars Head Gasket Sealant provides continuous protection against small leaks in the cylinder head gasket and engine block. Regular checks of your coolant level and system integrity are always recommended as part of routine vehicle maintenance.

6. Кыйынчылыктарды

This product is most effective for small leaks and early symptoms of head gasket failure. It is recommended for vehicles that do not overheat or require a coolant fill after idling the engine for 15-30 minutes. If your vehicle exhibits severe overheating, significant coolant loss, or other major mechanical issues, this product may not be sufficient, and professional mechanical inspection is advised.

7. Продукттун спецификациялары

АтрибутДеталь
БрендБарлар
Модель номериBARSH1S1L91
Өндүрүүчү бөлүгүнүн номери1830976
Көлөм600мл
МатериалGlass (referring to the active ingredient, sodium silicate)
Элемент Салмагы1.35 фунт
Продукциянын өлчөмдөрү2.28 x 3.7 x 7.17 дюйм
ШайкештикCompatible with all anti-freeze types. Not suitable for cooling systems under 3 liters.

8. Кепилдик жана колдоо

For product support, technical assistance, or warranty inquiries, please refer to the official Bars website or contact their customer service directly. Specific warranty details may vary by region and retailer.

Өндүрүүчү: Барлар

Webсайт: www.barsgroup.com

Тектеш документтер - BARSH1S1L91

Preview iBoard Running Boards Орнотуу колдонмосу - APS
Транспорт каражаттары үчүн APS iBoard чуркоо такталарын (кадам тилкелери) этап-этабы менен орнотуу нускамалары, анын ичинде бөлүктөрдүн тизмеси жана аппараттык бөлүкчөлөр. Модели IB-010C&H.
Preview MaxMate 3.5" Step Bars Орнотуу колдонмосу - SS2N35208MX
MaxMate 3.5 дюймдук Step Bars (SS2N35208MX модели) үчүн комплекстүү орнотуу көрсөтмөсү. Тетиктердин тизмеси, моменттин мүнөздөмөлөрү жана Nissan Frontier сыяктуу унааларга тууралоо боюнча кадам-кадам нускамалары камтылган. Туура орнотулганын жана коопсуз орнотулганын текшериңиз.
Preview iBoard Running Boards Орнотуу колдонмосу - IB-054C&H
APS (модел IB-054C&H) тарабынан iBoard чуркоо такталары үчүн расмий орнотуу колдонмосу. Автоунааны орнотуу үчүн кадам-кадам нускамаларды, бөлүктөрдүн тизмелерин жана бекиткичтин спецификацияларын берет.
Preview MaxMate 3.5" Step Bars Орнотуу колдонмосу (SS2D35098MX)
MaxMate 3.5" Step Bars (SS2D35098MX модели) үчүн кадам-кадам орнотуу нускамалары, анын ичинде бөлүктөрдүн тизмеси, моменттин маанилери жана Ram 1500 үчүн орнотуу процедуралары.
Preview Jaguar F-PACE Cross Bars Fitting Instruction - Орнотуу боюнча колдонмо
Jaguar F-PACE кайчылаш тилкелерин орнотуу боюнча толук нускамалар (Part № T4A6946). F-PACE унааңыздын чатырынын кайчылаш тилкелерин кантип коопсуз орнотууну, алып салууну жана кайра орнотууну үйрөнүңүз.
Preview iArmor IA-S044 ролик панелинин орнотуу боюнча колдонмосу
APS тарабынан чыгарылган iArmor IA-S044 термелүүчү панелдик орнотмолорун орнотуу боюнча деталдуу көрсөтмөлөр. Ford F-150 2004-2008 SuperCrew Cab үчүн тетиктердин тизмесин, момент мүнөздөмөлөрүн жана этап-этабы менен көрсөтмөлөрдү камтыйт.