LS2 туулгалары Challenger Carbon GT Carver туулгасы колдонуучунун колдонмосу

1. Коопсуздук маалыматы

1.1 Маанилүү коопсуздук эскертүүлөрү

• This helmet is designed to meet or exceed DOT FMVSS 218 Standard. Always ensure your helmet is properly fastened before riding.
• Сунуш 65 Эскертүү: Бул өнүмдүн курамында Калифорния штаты ракка жана тубаса кемтиктерге же башка репродуктивдик зыяндарга алып келүүчү химиялык заттар болушу мүмкүн.
• Never modify your helmet. Any alteration can compromise its protective capabilities.
• A helmet can only protect if it fits correctly. Refer to the size guide for proper fitting.
• In the event of an impact, even if there is no visible damage, the helmet's protective capacity may be compromised. It is recommended to replace the helmet after any significant impact.

1.2 Туулганы туура кийүү

A correctly fitting helmet is crucial for safety. The helmet should feel snug all around your head, without excessive pressure points. It should not move freely when you shake your head. The chin strap must be securely fastened.

Refer to the size guide in Section 5.2 for head circumference measurements.

2. Продукт бүтүп калдыview

The LS2 Challenger Carbon GT Carver Helmet is engineered for performance and protection, featuring advanced materials and rider-focused design.

Image 2.1: LS2 Challenger Carbon GT Carver Helmet (Blue Carbon variant).

2.1 Негизги өзгөчөлүктөрү

• Shell Construction: Ultra-light, extra-strong High Performance Fiberglass Composite.
• Коопсуздук стандарттары: DOT approved, meets FMVSS 218 Standard.
• Integrated Sun Shield: Twin Shield System for easy operation with gloved hands.
• Туура: Three shell sizes for optimal fit, long oval shape with multi-density EPS.
• Emergency Release System: Padding in the neck and jaw area designed for emergency removal.
• Вентиляция: Optimized airflow for rider comfort.

2.2 Helmet Components

• Сырткы кабык: The primary protective layer.
• EPS лайнери: Energy-absorbing foam layer.
• Comfort Liner: Removable and washable interior padding.
• Визорду тазалоо: Main external shield for vision.
• Internal Sun Shield: Retractable tinted visor.
• Вентиляция системасы: Intake and exhaust vents.
• ээк боосу: Retention system for securing the helmet.

Image 2.2: LS2 Challenger Carbon GT Carver Helmet (White/Hi-Vis Yellow variant).

3. Орнотуу

3.1 Алгачкы текшерүү

Before first use, carefully inspect your helmet for any signs of damage from shipping. Check that the visor operates smoothly and the chin strap buckle functions correctly.

3.2 Visor Installation and Removal

The clear visor can be removed for cleaning or replacement. Consult the quick-release mechanism on the side plates of the helmet. Typically, a lever or button allows the visor to detach. Align the visor tabs with the helmet's slots and press firmly until it clicks into place.

3.3 Pinlock Insert Installation

Your helmet may include a Pinlock anti-fog insert. To install:

1. Remove the clear visor from the helmet.
2. Flex the visor slightly to flatten it.
3. Align the Pinlock insert's silicone seal with the visor's inner surface, ensuring the pins fit into the designated holes.
4. Press the insert firmly onto the pins, working from the center outwards, until the silicone seal creates a tight fit around the visor.
5. Ensure there are no gaps between the Pinlock and the visor.

3.4 Adjusting Ventilation

The helmet features adjustable vents on the chin and top. Open or close these vents by sliding the respective mechanisms to control airflow. Fully open for maximum ventilation, closed for reduced airflow.

4. Иштөө нускамалары

4.1 Тунук көз айнектин иштеши

The clear visor can be opened to various positions or fully closed. Use the tab on the visor to lift or lower it. Ensure the visor is fully closed for maximum protection and to minimize wind noise at higher speeds.

4.2 Twin Shield System (Internal Sun Shield) Operation

The internal sun shield is operated by a lever located on the side of the helmet. Slide the lever forward to deploy the sun shield and backward to retract it. This system provides quick eye protection from glare without needing to change visors.

4.3 Ventilation System Use

Adjust the chin and top vents according to riding conditions. Opening the vents increases airflow, which can help with cooling and fog prevention. Closing them reduces airflow, useful in colder or wet conditions.

Image 4.1: LS2 Challenger Carbon GT Carver Helmet (Red/Black variant).

5. Техникалык тейлөө жана кам көрүү

5.1 Туулга кабыгын тазалоо

Clean the helmet shell with a soft cloth, warm water, and mild soap. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the shell material and finish. Rinse thoroughly and air dry.

5.2 Cleaning the Visor and Sun Shield

Remove the visor and sun shield for cleaning. Use warm water and a soft cloth. For stubborn dirt or insects, soak a soft cloth in warm water and place it over the affected area for a few minutes before gently wiping. Do not use abrasive materials or chemical cleaners. Air dry or gently pat dry with a microfiber cloth.

5.3 Cleaning and Removing the Interior Liner

The interior comfort liner is removable and washable. Gently detach the liner components from the helmet. Hand wash with mild soap and warm water, or machine wash on a delicate cycle in a laundry bag. Air dry completely before re-installing. Ensure all components are dry to prevent mildew.

5.4 Сактоо

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided helmet bag to protect it from dust and scratches.

6. Кыйынчылыктарды

• Whistling Noise from Visor: If a whistling noise occurs when the clear visor is partially open, ensure it is either fully closed or opened to a stable detent position. Some visor positions may create aerodynamic noise.
• Sun Shield Not Functioning Smoothly: Check for any obstructions in the sun shield mechanism. Ensure the lever is clean and free of debris. If the issue persists, contact customer support.
• Көз айнекти тумандатуу: Ensure the Pinlock insert is correctly installed and sealed. If fogging still occurs, slightly open the clear visor to allow more airflow, or utilize the helmet's ventilation system.
• Helmet Feels Too Tight/Loose: Refer to the size guide in Section 5.2. If the fit is incorrect, consider trying a different size. Helmet liners can compress slightly over time, but a helmet should always feel snug.

7. Техникалык шарттар

7.1 Жалпы спецификациялар

7.2 US LS2 Helmet Size Chart

8. Кепилдик жана колдоо

8.1 Кепилдик маалыматы

LS2 Helmets typically offer a 5-year warranty against defects in materials and workmanship. This warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

8.2 Кардарларды колдоо

For further assistance, warranty claims, or inquiries regarding your LS2 Challenger Carbon GT Carver Helmet, please contact LS2 Helmets customer support through their official website or authorized dealers. Provide your helmet model and purchase details for efficient service.