1. Киришүү
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x User Manual
- Монтаждоо кронштейндери жана буроолор
3. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | HOS-401WBT |
| Динамик түрү | Тышкы / ички |
| Power Output | 200 Вт (ар бир динамикке 100 Вт) |
| Вуфердин диаметри | 4 дюйм |
| Tweeter диаметри | 1 дюйм |
| Байланыш | Bluetooth, Wired (Passive speaker connection) |
| Bluetooth диапазону | 20.12 метрге чейин (66 фут) |
| Сууга туруктуулук деңгээли | IP66 (Сууга туруктуу) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Продукциянын өлчөмдөрү (L x W x Y) | 8.62" x 5.67" x 6.62" (219 мм x 144 мм x 159 мм) |
| Киргизүү көлөмүtage | 12 вольт |
| Аудио чыгаруу режими | Стерео |
4. Орнотуу
4.1 Спикерлерди орнотуу
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- кашааларды алып салуу: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Белгилөө: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Кашаларды орнотуу: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Attach Speakers: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Динамиктерди зымдарга кошуу
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Кубат туташуу: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Операция
5.1 Bluetooth жупташтыруу
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Bluetooth иштетүү: Смартфонуңузда же планшетиңизде Bluetooth'ду күйгүзүңүз.
- Издөө Түзмөк: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Туташуу: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Аудио ойнотуу
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Үндү көзөмөлдөө: Adjust the volume directly from your connected device.
- Үн сапаты: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Техникалык тейлөө
- Тазалоо: Динамиктин беттерин тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Аба ырайын коргоо: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Сактагыч: Эгерде динамиктерди узак убакытка сактап жатсаңыз, аларды электр кубатынан сууруп, салкын, кургак жерде сактаңыз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Кубат адаптери туташкан эмес же туура эмес розетка. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Үн жок | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Bluetooth ажыратылды | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Бурмаланган үн | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Кепилдик жана колдоо
All Herdio speaker products come with a 1 жылдык Чектелген Кепилдик against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
For questions or support, please contact us at: support@herdiotech.com
