Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Piko 35040 G Scale R/C Loco Receiver with Pocket Remote. This system is designed to provide reliable radio control for G-scale/Gauge 1 locomotives, enhancing your model railroading experience with precise control.
Коопсуздук маалыматы
Please read all safety instructions carefully before operating the device to ensure safe and proper use.
- Түзмөктү нымдуулуктан, түз күн нурунан жана өтө жогорку температурадан алыс кармаңыз.
- Ensure proper electrical connections to avoid short circuits and electrical hazards.
- This product is recommended for users aged 14 years and up due to small parts and electrical components.
- Do not attempt to disassemble, modify, or repair the receiver or remote. Refer all servicing to qualified personnel.
For detailed electrical safety guidelines, consult a qualified professional or refer to relevant electrical safety standards.
Пакеттин мазмуну
Verify that all components are present in the packaging upon unboxing:
- Piko 35040 G Scale R/C Loco Receiver (Circuit Board)
- Piko Pocket Remote Control
- Көрсөтмө (бул документ)
Note: Additional wiring, power supply components, and locomotive are required for operation and are sold separately.
Орнотуу жана орнотуу
The Piko 35040 receiver is designed for seamless integration into G-scale/Gauge 1 locomotives. Careful installation ensures optimal performance.
Ресиверди орнотуу
The receiver circuit board, illustrated below, features convenient terminal blocks for electrical connections.
Сүрөт: The Piko 35040 G Scale R/C Loco Receiver circuit board (bottom) and its accompanying pocket remote control (top). The circuit board is green with a prominent green terminal block for wiring, along with various integrated circuits. The black pocket remote features four distinct buttons: two triangular directional arrows (up and down), a single horizontal bar, and a double horizontal bar, with the "PIKO" logo visible at the bottom.
- Кубат туташуу: Connect your locomotive's power source to the designated input terminals on the green terminal block. Ensure the power supply matches the receiver's voltage requirements and does not exceed its 3.5A current capacity.
- Мотор туташуусу: Connect the locomotive's motor leads to the appropriate output terminals on the receiver. Verify correct polarity to ensure the desired direction of travel corresponds to the remote control inputs.
- Auxiliary Connections (Optional): If your locomotive supports additional functions (e.g., lights, sound), connect them to the auxiliary terminals as per the detailed wiring diagram provided with your product or Piko's official documentation.
- Коопсуз орнотуу: Mount the receiver securely within the locomotive chassis. Use non-conductive standoffs or appropriate adhesive to prevent short circuits, vibration damage, and ensure stable operation.
Алыстан башкарууну жупташтыруу
The pocket remote control is typically pre-paired with the receiver at the factory. If re-pairing becomes necessary, consult the specific instructions included in the product packaging or refer to Piko's official support resources for the pairing procedure.
Иштөө нускамалары
Familiarize yourself with the functions of the pocket remote control for effective operation of your locomotive.
Алыстан башкаруу функциялары
The pocket remote control (refer to the image in the Setup section) features the following buttons:
- Өйдө жебе баскычы (▲): Increases locomotive speed in the forward direction.
- Төмөн жебе баскычы (▼): Increases locomotive speed in the reverse direction.
- Single Bar Button (I): Decreases locomotive speed gradually or applies brakes.
- Double Bar Button (II): Brings the locomotive to a complete stop or activates a specific auxiliary function (e.g., emergency stop, horn, bell).
Негизги операция
- Ensure both the locomotive (with installed receiver) and the remote control are powered on.
- колдонуу Жогору жебе or Төмөн жебе buttons to control the locomotive's speed and direction. Pressing repeatedly will increase speed.
- басыңыз Single Bar button to gradually reduce the locomotive's speed.
- басыңыз Double Bar button to bring the locomotive to a complete stop or to activate its assigned auxiliary function.
For advanced functions, programming, or custom assignments of the auxiliary button, consult the full Piko R/C system manual or Piko's online resources.
Техникалык тейлөө
The Piko 35040 receiver and remote are engineered for durability and require minimal maintenance to ensure long-term performance.
- Keep both the receiver and remote control clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the components to excessive moisture, high humidity, or direct sunlight, which can damage internal electronics.
- Periodically inspect all wiring connections for looseness or signs of corrosion. Secure or clean connections as necessary.
- Replace the remote control batteries as needed. Refer to the remote's battery compartment for the correct battery type and replacement procedure.
Do not use harsh chemicals, solvents, or abrasive cleaners on any part of the device, as these can damage the finish or internal components.
Проблемаларды чечүү
Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы көйгөйлөр каралат жана аларды чечүү жолдору каралган.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Locomotive does not respond to remote commands. | No power to receiver; Remote control batteries are low or dead; Receiver is not properly paired with the remote; Wiring issue. | Check the power supply to the receiver and locomotive; Replace the remote control batteries; Attempt to re-pair the receiver and remote (refer to pairing instructions); Verify all wiring connections are secure and correct. |
| Intermittent control or erratic behavior. | Radio interference from other devices; Loose electrical connection; Low remote control battery. | Operate the locomotive in an area with less potential radio interference; Check and secure all wiring connections; Replace the remote control battery. |
| Locomotive moves in the wrong direction when commanded. | Motor wiring polarity is reversed on the receiver. | Carefully reverse the motor lead connections on the receiver's terminal block. |
If you continue to experience issues after attempting these solutions, please contact Piko customer support or consult a qualified model train technician for further assistance.
Техникалык шарттар
- Модел: Piko 35040
- Продукт түрү: G Scale R/C Loco Receiver with Pocket Remote
- Учурдагы кубаттуулугу: 3.5 Amperes (A)
- Сунушталган жаш: 14 жаш жана андан жогору
- ASIN: B07N89WN6F
- Өндүрүүчү: Piko
Кепилдик жана колдоо
For detailed warranty information regarding your Piko 35040 R/C Loco Receiver, please refer to the official Piko website or the warranty documentation included with your product packaging. Piko is committed to providing high-quality products built with robust materials and realistic detail.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact Piko customer service directly or reach out to your authorized Piko dealer.
Piko Official Webсайт: www.piko.de
