Sage Barista Pro эспрессо машинасынын колдонуу боюнча нускамасы

Introduction

Welcome to the comprehensive instruction manual for your Sage Barista Pro Bean-to-Cup Espresso Machine. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your machine to ensure you consistently achieve barista-quality coffee at home. The Barista Pro features an intuitive LCD interface, a rapid 3-second ThermoJet heating system, an integrated conical burr grinder with dose control, precise PID temperature control, and a powerful steam wand for microfoam milk texturing.

Продукт бүттүview

1-сүрөт: Фронт view of the Sage Barista Pro Espresso Machine, showcasing its brushed stainless steel finish, integrated grinder, LCD display, and control buttons.

2-сүрөт: Included accessories: 54mm portafilter, milk jug, tamper, water filter, cleaning accessories, descaler, dosing funnel, single and dual wall filter baskets, cleaning tablets, and The Razor precision dose trimming tool.

Жайгашуу

1. Пакеттен чыгаруу: Carefully remove all packaging materials and place the machine on a flat, stable surface. Ensure all accessories listed in Figure 2 are present.
2. Суу резервуарды орнотуу: Fill the 2-liter water tank with fresh, cold water. Insert the Claro Swiss water filter into the tank as per the filter instructions. Place the tank securely at the back of the machine.
3. буурчак бункер орнотуу: Place the bean hopper on top of the machine and twist to lock it into position. Fill with fresh whole coffee beans.
4. Баштапкы чайкоо цикли: Before first use, perform an initial rinse cycle to prime the machine. Refer to the "First Use" section in the operating instructions for detailed steps.

Иштөө нускамалары

1. Майдалоо жана дозалоо

3-сүрөт: The portafilter filled with freshly ground coffee, ready for tamping. The machine features auto grind and dose with 30 grind settings.

• Select Filter Basket: Choose the appropriate single or dual wall filter basket (1-cup or 2-cup) and place it into the portafilter.
• Майдалоо өлчөмүн тууралаңыз: Use the grind size dial to select your desired grind setting. Finer grinds are typically for espresso, coarser for other methods. The Barista Pro offers 30 grind settings.
• Dose Control: Insert the portafilter into the grinding cradle. The integrated conical burr grinder will automatically dispense the correct amount of coffee. You can adjust the dose if needed via the LCD interface.
• Tamping: Майдалагандан кийин, камтылган t колдонуңузampкофенин майдаланган бөлүгүн портафилтрге бекем жана бирдей басуу үчүн.
• Trimming the Dose: Use The Razor precision dose trimming tool to ensure the correct dose level for optimal extraction.

2. Эспрессо экстракциясы

4-сүрөт: The Barista Pro heats up in just 3 seconds using the ThermoJet heating system, ready for immediate use.

5-сүрөт: Precise 9-bar extraction delivered via the 15-bar Italian pump ensures optimal flavor.

• Portafilter киргизүү: Топтун башына портафильтрди бекитиңиз.
• Алдын ала жылытуу: The ThermoJet heating system reaches optimal extraction temperature in 3 seconds.
• Чыгарууну баштоо: Press the 1-cup or 2-cup button to begin extraction. The machine uses low-pressure pre-infusion, gradually increasing pressure to ensure all flavors are drawn out evenly. Digital PID temperature control maintains water temperature within +/- 2°C for optimal espresso extraction.
• Агымды көзөмөлдөө: Observe the espresso flow. It should resemble warm honey. Adjust grind size and dose if the flow is too fast or too slow.

3. Сүттүн текстурасы

6-сүрөт: The powerful steam wand quickly transforms milk into silky smooth microfoam, perfect for latte art.

• Сүт даярдоо: Дат баспас болоттон жасалган сүт кумурасын муздак сүт менен толтуруңуз.
• Буу таякчасын тазалоо: Briefly open the steam valve to purge any condensed water from the wand.
• Текстура сүтү: Insert the steam wand into the milk. Open the steam valve fully. Position the wand to create a vortex, incorporating air to create microfoam. Heat the milk to your desired temperature (typically 60-65°C).
• Таза буу таякчасы: Immediately after use, wipe the steam wand with a damp кездемеге сүртүп, сүттүн калдыктарын тазалоо үчүн кайра сүртүңүз.

Техникалык тейлөө

• Күнүмдүк тазалоо:
  • Тамчылатуучу лотокту бошотуп, чайкаңыз.
  • Машинанын сыртын жумшак менен сүртүңүз, гamp кездеме.
  • Ар бир колдонуудан кийин буу таякчасын дароо тазалаңыз.
  • Remove and clean the portafilter and filter baskets.
• Топтун башчысын тазалоо: Periodically clean the group head using the included cleaning brush and backflush disc with a cleaning tablet. Follow the machine's display prompts for the cleaning cycle.
• Тазалоо: The machine will indicate when descaling is required. Use the provided descaler solution and follow the instructions on the descaler packet and the machine's display. Regular descaling prevents mineral buildup and maintains machine performance.
• Суу чыпкасын алмаштыруу: Replace the Claro Swiss water filter every 2-3 months, or as indicated by the machine, to ensure optimal water quality and reduce the need for descaling.

Проблемаларды чечүү

Техникалык шарттар

7-сүрөт: Product dimensions: 40.6cm High x 35.4cm Wide x 34.3cm Deep.

Кепилдик жана колдоо

The Sage Barista Pro Espresso Machine comes with a Продукцияга 2 жылдык кепилдик. For warranty claims, technical support, or service inquiries, please contact Sage Appliances customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official Sage Appliances webсайтка же продуктунун таңгагында көрсөтүлгөн байланыш маалыматына кайрылыңыз.