Walfront BLDC Motor Controller Instruction Manual

1. Киришүү

Thank you for choosing the Walfront BLDC Motor Controller. This high-efficiency, compact, and lightweight brushless DC motor driver board is designed for various applications requiring precise motor control, such as drones and RC cars. This manual provides essential information for the safe and effective use of your motor controller. Please read it thoroughly before installation and operation.

2. Коопсуздук маалыматы

• Always disconnect power before making any connections or disconnections to prevent electric shock or damage to the device.
• Ensure correct polarity when connecting power. Incorrect polarity can cause irreversible damage to the controller.
• Көрсөтүлгөн көлөмдөн ашпаңызtage (DC 12V-36V) or current (15A) limits.
• Operate the controller within the recommended temperature range (-40 to 85°C) and humidity (90% RH).
• Avoid short circuits on any terminals.
• Keep the controller away from moisture, dust, and corrosive substances.
• Professional installation is recommended for users unfamiliar with electronic wiring.

3. Продукт бүтүп калдыview

3.1 Негизги өзгөчөлүктөрү

• Жогорку сапаттагы курулуш: Made from durable materials for extended service life and reliable performance.
• Натыйжалуу аткаруу: Features low power consumption, high reliability, and high efficiency for optimal motor operation.
• Компакт дизайн: Small form factor makes it easy to integrate, carry, and store, enhancing operational efficiency.
• Multi-functional Protection: Includes undervoltage protection to prevent damage from instantaneous high currents, overcurrent protection, and short-circuit protection for safe motor driving.
• Wide Voltage Шайкештик: Supports DC 12V-36V power input, making it suitable for a broad range of applications with brushless DC motors.

3.2 Компоненттер

The Walfront BLDC Motor Controller board includes power input terminals, motor output terminals (U, V, W), Hall sensor input terminals (Ha, Hb, Hc), and control signal input terminals (Enable, Speed, Direction).

1-сүрөт: Жогорку жана ылдый view of the Walfront BLDC Motor Controller board. This image shows the layout of components on both sides of the circuit board, including the MOSFETs on the bottom and capacitors and control ICs on the top.

2-сүрөт: Жакын план view of the capacitors on the Walfront BLDC Motor Controller. These capacitors are rated 220uF 50V, providing power filtering for stable operation.

4. Техникалык шарттар

3-сүрөт: Physical dimensions of the Walfront BLDC Motor Controller board. The board measures approximately 63mm x 42.5mm with a height of 17mm.

4-сүрөт: Visual summary of key specifications for the 12-36V 500W brushless motor controller, including operating voltage, current, power, speed voltage, temperature, humidity, and protection features.

5. Орнотуу жана зымдар

Proper wiring is crucial for the correct and safe operation of the BLDC motor controller. Refer to the wiring diagram below and follow the instructions carefully.

5-сүрөт: Detailed wiring diagram for the Walfront BLDC Motor Controller. This diagram illustrates connections for power (DC 12V-36V), motor three-phase wiring, Hall sensor wiring, and control signals (enable, speed potentiometer, reverse switch).

5.1 Кубат туташтыруу

• Connect your DC 12V-36V power supply to the designated power input terminals on the board. Ensure correct polarity (+ and -).

5.2 Мотордун зымдары

• Connect the three-phase wires of your brushless DC motor to the U, V, W output terminals on the controller board.
• If your motor has Hall sensors, connect the Hall sensor wires (Ha, Hb, Hc) and their corresponding 5V and GND wires to the Hall sensor input terminals on the controller.

5.3 Control Port Connections

• Enable Switch: Connect an enable switch. Connecting 5V to this pin enables operation, and connecting to GND stops operation.
• Ылдамдыкты көзөмөлдөө: Use a 10K-100K potentiometer for speed control. Alternatively, an analog voltage input (0.1V-5V) or PWM signal can be used.
• Reverse Switch: Connect a reverse switch. Connecting 5V to this pin sets one direction, and connecting to GND sets the opposite direction.

6. Иштөө нускамалары

Once all connections are securely made and verified, you can proceed with operating the motor controller.

• Күйгүзүү: Apply power to the controller within the specified voltage диапазону (DC 12V-36V).
• Enable Motor: Ensure the enable switch is set to the 'ON' position (connected to 5V) to allow motor operation.
• Ылдамдыкты жөндөө: Use the connected potentiometer or provide the appropriate analog voltage/PWM signal to the speed control input to adjust the motor's rotational speed. The motor will accelerate to the set speed over approximately 3 seconds due to the soft-start feature.
• Багытын өзгөртүү: Toggle the reverse switch to change the motor's direction of rotation.
• Өчүрүү: Disconnect the power supply to turn off the motor and controller.

7. Техникалык тейлөө

To ensure the longevity and optimal performance of your Walfront BLDC Motor Controller, follow these maintenance guidelines:

• Тазалыкты сактоо: Regularly clean the board to remove dust and debris, which can affect heat dissipation and component performance. Use a soft, dry brush or compressed air.
• Байланыштарды текшерүү: Бардык зымдардын туташууларынын бекем жана дат баспагандыгын мезгил-мезгили менен текшерип туруңуз. Бошоң туташуулар үзгүлтүккө учурап иштөөгө же бузулууга алып келиши мүмкүн.
• Экологиялык көзөмөл: Operate and store the controller in a dry, well-ventilated environment within the specified temperature and humidity ranges.
• Физикалык стресстен качыңыз: Do not bend or apply excessive force to the board or its components. Ensure proper mounting to prevent vibration-induced damage.

8. Кыйынчылыктарды

If you encounter issues with your Walfront BLDC Motor Controller, refer to the following troubleshooting steps:

• Мотор айланбай жатат:
  • Электр кубаты туура туташтырылганын жана көрсөтүлгөн томду камсыздаганын текшериңизtage (12V-36V DC).
  • Check all motor phase wire connections (U, V, W) and Hall sensor connections (Ha, Hb, Hc, 5V, GND) for proper seating and continuity.
  • Ensure the enable switch is in the 'ON' position (connected to 5V).
  • Confirm that the speed control input is receiving a valid signal (0.1V-5V analog or PWM).
  • If using a Hall sensor motor, ensure the Hall sensors are functioning correctly. Some motors may vibrate instead of spinning if Hall sensor signals are incorrect or missing.
• Контроллердин ысып кетиши:
  • Ensure the motor current does not exceed 15A. Overloading the motor can cause excessive heat.
  • Verify that the motor is not stalled or experiencing excessive mechanical resistance.
  • Check for any short circuits in the motor wiring or on the board itself.
  • Ensure adequate ventilation around the controller. If possible, consider adding a heatsink if operating at high loads or ambient temperatures. Note: Some units may have uneven soldering on FETs, making heatsink attachment difficult.
• Туруксуз кыймыл-аракет:
  • Inspect all signal wires for interference or loose connections.
  • Ensure the control signals (speed, direction) are stable and within the specified ranges.
  • Verify that the motor's Hall sensors are correctly aligned and providing accurate feedback.

If the problem persists after following these steps, please contact Walfront customer support for further assistance.

9. Кепилдик жана колдоо

Walfront products are designed for reliability and performance. While specific warranty details may vary by region and retailer, Walfront typically offers support for manufacturing defects. For warranty claims, technical assistance, or any product-related inquiries, please refer to your purchase documentation or contact Walfront customer service through the retailer where the product was purchased.

Please have your model number (Wal frontg9nmdcgx78) and purchase date available when contacting support.