Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sommer Pearl 4018 wireless garage door transmitters. These transmitters are designed for reliable and secure control of compatible garage door openers, utilizing the SOMloq2 radio system and offering retro-compatibility with the Somloq Rollingcode system.
Please read this manual carefully before using the product to ensure proper functionality and longevity.
Жайгашуу
The Sommer Pearl 4018 transmitters come pre-equipped with a 3V CR2032 battery. Before initial use, ensure the battery is properly seated and any protective tabs are removed.
This image displays three Sommer Pearl 4018 wireless garage door transmitters. Each transmitter is black with four rectangular buttons outlined in red, and the 'SOMMER' logo is visible on the right side. These compact devices are designed for remote operation of garage doors.
Pairing with Your Garage Door Opener
- Locate the programming button on your garage door opener's receiver unit. Refer to your opener's specific manual for its exact location.
- Press and hold the programming button on the receiver until the indicator light illuminates or flashes, indicating it is in pairing mode.
- Within a few seconds, press and hold the desired button on your Sommer Pearl 4018 transmitter that you wish to program.
- Release the button on the transmitter once the receiver's indicator light changes (e.g., turns solid, stops flashing, or makes a sound), confirming successful pairing.
- Test the programmed button to ensure it operates the garage door correctly.
For existing Somloq Rollingcode systems, the Pearl 4018 is retro-compatible, allowing seamless integration with your current setup.
Иштеп жатат
The Sommer Pearl 4018 transmitter features four distinct buttons for controlling various functions of your garage door opener or other compatible devices.
Негизги операция
- Ачылышы/жабылышы: Press the programmed button once to activate the garage door opener. Pressing it again will typically stop or reverse the door's movement, depending on your opener's configuration.
- Бир нече функциялар: If multiple buttons are programmed for different functions (e.g., opening different doors, controlling lights), press the corresponding button for the desired action.
The transmitter operates with a radio frequency of FM 868.8 MHz and FM 868.95 MHz, providing a reliable signal. The typical operating range is approximately 50 meters, though this can vary based on environmental factors such as obstacles and interference. The signal is designed to be interference-resistant, ensuring consistent performance.
Техникалык тейлөө
Regular maintenance ensures the optimal performance and longevity of your Sommer Pearl 4018 transmitters.
Батареяны алмаштыруу
The transmitter uses a 3V CR2032 lithium metallic battery. When the signal range decreases significantly or the indicator light on the transmitter fails to illuminate upon button press, it is likely time to replace the battery.
- Өткөргүчтү кылдаттык менен ачыңыз casing. Refer to the product's design for the specific opening mechanism (e.g., small screw, snap-fit).
- Эски CR2032 батареясын алып салыңыз.
- Insert a new 3V CR2032 battery, ensuring the correct polarity (+ side up).
- Securely close the transmitter casing.
Тазалоо жана сактоо
- Clean the exterior of the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Store the transmitter in a dry environment, away from extreme temperatures and direct sunlight.
- The transmitter is designed with a durable stainless steel finish, offering resistance to minor impacts.
Проблемаларды чечүү
If you experience issues with your Sommer Pearl 4018 transmitter, consider the following common solutions:
- Transmitter Not Responding:
- Check the battery. Replace it if it's low or depleted.
- Ensure you are within the operating range of the garage door opener.
- Verify that the transmitter is properly paired with the opener. If not, repeat the pairing process outlined in the Setup section.
- Кыскартылган диапазон:
- Батареяны алмаштырыңыз.
- Check for sources of radio interference in the vicinity (e.g., other wireless devices, large metal objects).
- Ensure there are no physical obstructions between the transmitter and the receiver.
- Үзгүлтүксүз иштөө:
- Confirm the battery connection is secure.
- Re-pair the transmitter with the garage door opener.
If problems persist after attempting these solutions, please contact customer support or a qualified technician.
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | CFL (4018V000) |
| Өлчөмдөрү (L x W x Y) | 79 x 26 x 13 мм |
| Салмагы | 130 грамм |
| Радио жыштыгы | FM 868.8 МГц, FM 868.95 МГц |
| Радио системасы | SOMloq2 (Retro-compatible with Somloq Rollingcode) |
| баскычтардын саны | 4 |
| Батарея түрү | 3V CR2032 (кошулган) |
| Иштөө диапазону | Approx. 50 meters (environment dependent) |
| Материалдык бүтүрүү | Дат баспаган болот |
Кепилдик маалымат
Specific warranty details for the Sommer Pearl 4018 transmitters are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact the authorized seller or manufacturer directly.
Колдоо
For technical assistance, troubleshooting beyond the scope of this manual, or inquiries about your Sommer Pearl 4018 transmitters, please contact:
- Your Seller: DOMO-MATIC (as listed on the product page)
- Өндүрүүчү: Sommer (refer to their official webбайланыш маалыматтары үчүн сайт)
When contacting support, please have your product model number (CFL) and any relevant purchase information ready.
