Primo Water 601234 ысык/муздак суу диспенсеринин колдонуучу колдонмосу

Introduction

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Primo Water 601234 Hot/Cold Water Dispenser. Please read all instructions carefully before use and retain this manual for future reference.

Коопсуздук маалыматы

• Always place the dispenser on a level, stable surface.
• Ensure the dispenser is plugged into a grounded electrical outlet.
• Эгерде электр шнуру бузулган болсо, диспенсерди иштетпеңиз.
• Keep children away from the hot water faucet to prevent burns. The hot water faucet is equipped with a child-resistant safety feature.
• Do not immerse the dispenser, power cord, or plug in water or other liquids.
• Тазалоодон же техникалык тейлөөдөн мурун диспенсерди розеткадан сууруп алыңыз.
• Бул шайман ичүүчү сууну гана чыгарууга арналган.

Продукт бүттүview

The Primo Water 601234 dispenser provides instant access to hot and cold water. Familiarize yourself with its components:

Негизги компоненттер:

• Hot Water Dispense Button: Typically red, requires a safety lock engagement.
• Cold Water Dispense Button: Typically blue.
• Бөлүүчү түтүкчөлөр: Where water exits.
• Тамчылатма табак: Collects spills, removable for cleaning.
• Water Bottle Support Collar: Holds the water bottle in place.
• Электр кабели: Connects to electrical outlet.
• Hot/Cold Switches: Located on the back of the unit, control heating and cooling functions.

Жайгашуу

1. Пакеттен чыгаруу: Carefully remove the dispenser from its packaging. Retain packaging materials for future transport if needed.
2. Жайгашкан жери: Position the dispenser on a hard, level surface. Ensure there is at least 4 inches of clearance from the wall to allow for proper ventilation. Avoid direct sunlight or heat sources.
3. Кубат туташуу: Plug the dispenser into a standard 120V AC grounded electrical outlet. Do not use extension cords.
4. Суу бөтөлкөсүн орнотуу:
   • Clean the neck of a 3 or 5-gallon water bottle.
   • Remove the protective seal from the bottle cap. Do not remove the cap itself if it is a non-spill type.
   • Lift the water bottle and carefully insert it onto the water bottle support collar, ensuring it is seated firmly. The probe will push through the bottle cap.
5. Initial Priming: Before turning on the heating and cooling switches, dispense at least 1 liter of water from both the hot and cold faucets to ensure the tanks are filled. This prevents dry heating.
6. Жылытууну/Муздатууну иштетүү: Locate the hot and cold switches on the back of the unit. Flip them to the 'ON' position. Allow approximately 15-30 minutes for the water to reach optimal hot and cold temperatures.

Иштеп жатат

Муздак суу берүү:

1. Place a cup under the cold water spout.
2. Press the blue cold water dispense button.
3. Release the button once the desired amount of water is dispensed.

Ысык сууну берүү:

1. Place a heat-resistant cup under the hot water spout.
2. Engage the child-resistant safety lock (usually by sliding or pressing a button above the hot water dispense button).
3. While holding the safety lock, press the red hot water dispense button.
4. Release the button once the desired amount of hot water is dispensed.

Техникалык тейлөө

Үзгүлтүксүз тазалоо жана тейлөө оптималдуу иштөөнү жана гигиенаны камсыз кылат.

Тышкы тазалоо:

• Диспенсерди электр розеткасынан сууруп алыңыз.
• Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Clean the drip tray and grill regularly. Remove the drip tray, empty it, wash with mild soap and water, rinse thoroughly, and replace.

Internal Cleaning (Every 3-6 Months):

• Диспенсерди розеткадан сууруп, суу бөтөлкөсүн чыгарыңыз.
• Drain all water from the hot and cold tanks using the drain plugs located on the back of the unit.
• Prepare a cleaning solution: Mix 1 gallon of warm water with 1 teaspoon of plain household bleach OR 1 gallon of warm water with 2 cups of white vinegar.
• Pour the cleaning solution into the reservoir.
• Allow the solution to sit for 15-30 minutes (for bleach) or 30 minutes (for vinegar).
• Drain the cleaning solution completely through the hot and cold faucets until the tanks are empty.
• Rinse the dispenser by filling the reservoir with clean tap water and draining it through the faucets. Repeat this rinsing process 2-3 times to remove any residual cleaning solution.
• Replace the drain plugs, install a new water bottle, and plug the dispenser back in.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

This Primo Water Dispenser is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For technical support, replacement parts, or warranty claims, please contact Primo customer service through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.