EKO 16100420

Eko GBU Clip-On Chromatic Tuner (16100420 модели) колдонуучунун колдонмосу

Your guide to accurate instrument tuning.

1. Киришүү

The Eko GBU Clip-On Chromatic Tuner is a versatile and easy-to-use device designed for accurate tuning of various stringed instruments. Utilizing vibration sensing, it provides precise tuning for guitars (acoustic, electric, classical), basses, ukuleles, mandolins, and violins. Its compact design and clip-on mechanism make it a convenient tool for musicians of all levels.

Eko GBU Clip-On Tuner front view

Сүрөт 1.1: Алдыңкы view of the Eko GBU Clip-On Chromatic Tuner, showing the display and power button.

2. Орнотуу

2.1. Батареяны орнотуу

  1. Тюнердин артындагы батарея бөлүкчөсүн табыңыз.
  2. Батареянын капкагын ачыңыз.
  3. Insert one CR2032 alkaline battery, ensuring the correct polarity (+/-).
  4. Батареянын капкагын бекем жабыңыз.

2.2. Attaching the Tuner

The tuner features a padded clip designed to securely attach to the headstock of your instrument without causing damage.

  1. Gently open the clip.
  2. Attach the tuner to the headstock of your instrument, ensuring a firm and stable connection. The tuner's display should be visible to you.
Eko GBU Clip-On Tuner back view клип менен

Сүрөт 2.1: Арткы view of the Eko GBU Clip-On Tuner, showing the spring-loaded clip mechanism for attachment to an instrument's headstock.

2.3. Күйгүзүү / Өчүрүү

Press and hold the power button (usually located on the front or side of the tuner) for approximately 2 seconds to turn the tuner on or off. The display will illuminate when powered on.

3. Operating the Tuner

3.1. Selecting Tuning Mode

The Eko GBU Tuner is a chromatic tuner, meaning it can detect and display any note. Some models may offer specific instrument modes (e.g., Guitar, Bass, Violin, Ukulele). If your tuner has a mode button, press it repeatedly to cycle through available modes. For general use, the chromatic mode (often indicated by 'C' or no specific instrument letter) is suitable for all instruments.

3.2. Tuning Your Instrument

  1. Ensure the tuner is securely clipped to your instrument's headstock.
  2. Pluck a single string on your instrument. The tuner will detect the vibration.
  3. The display will show the note being played and an indicator (needle or bars) to show if the note is flat, sharp, or in tune.
  4. Батир: If the indicator points to the left or shows a red/orange color, the note is flat. Tighten the string.
  5. Курч: If the indicator points to the right or shows a red/orange color, the note is sharp. Loosen the string.
  6. Үндө: When the note is in tune, the indicator will be centered, and the display will typically turn green.
  7. Repeat this process for all strings until your instrument is accurately tuned.
Eko GBU Clip-On Tuner display showing a note being tuned

Image 3.1: The tuner display showing a note (e.g., 'G') and the tuning indicator, which moves left for flat, right for sharp, and centers when in tune.

4. Техникалык тейлөө

4.1. Тазалоо

To clean your tuner, gently wipe it with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the display or casing.

4.2. Батареяны алмаштыруу

When the display dims or the tuner becomes unresponsive, it's time to replace the battery. Follow the battery installation steps in Section 2.1.

4.3. Сактоо

Store the tuner in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

5. Кыйынчылыктарды

  • Тюнер күйбөйт: Check if the battery is inserted correctly with the correct polarity. Replace the battery if it is depleted.
  • Inaccurate tuning readings: Ensure the tuner is firmly clipped to the instrument's headstock. Environmental noise can sometimes interfere; try tuning in a quiet environment. Make sure you are plucking one string at a time clearly.
  • Дисплей күңүрт: Бул, адатта, батареянын заряды аз экенин билдирет. CR2032 батареясын алмаштырыңыз.

6. Техникалык шарттар

ӨзгөчөлүкДеталь
Модель номери16100420
Тунинг режимиChromatic (C)
аныктоо ыкмасыVibration Sensor
Power Source1 x CR2032 Alkaline Battery
МатериалПластик
Элемент Салмагы454 g (approximately 1 lb)
Пакеттин өлчөмдөрү20.32 x 20.32 x 15.24 см

7. Кепилдик жана колдоо

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official EKO Guitars webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

Тектеш документтер - 16100420

Preview Eko DUO Ыкчам баштоо колдонмосу: Орнотуу, колдонуу жана колдонмо интеграциясы
Эко DUO санариптик стетоскобун орнотуу жана колдонуу боюнча кыска нускама, анын ичинде кубаттоо, наушник орнотуу, колдонмо туташуу жана үн/ЭКГ тартуу.
Preview Eko төмөн чыгаруу фракциясы куралы (ELEFT) колдонуучусунун колдонмосу - толук колдонмо
Eko Low Ejection Fraction Tool (ELEFT) колдонуучусунун колдонмосу, чыгаруу фракциясы төмөн адамдарды аныктоодо чечим кабыл алууга колдоо көрсөтүү үчүн иштелип чыккан программалык камсыздоо. Техникалык мүнөздөмөлөрдү, система талаптарын жана колдонуу боюнча көрсөтмөлөрдү камтыйт.
Preview Manuel d'utilisation EKO Modèle ICE: Guide Complet
Manuel d'utilisation détaillé pour la montre EKO Modèle ICE. Apprenez à régler l'heure, ла дата, l'alarme, utiliser ле chronomètre жана découvrez Les caractéristiques du produit.
Preview Manuel d'utilisation Eko SAFE : Guide complet pour votre montre connectée enfant
Découvrez le manuel d'utilisation complet төгүү ла Montre connectée Eko SAFE. Apprenez à configurer, utiliser les fonctions, et résoudre Les problèmes courants de ce dispositif pour enfants.
Preview CORE 500™ Digital Stethoscope: Instructions for Use and Safety Information
Comprehensive guide to the Eko CORE 500™ Digital Stethoscope, covering setup, operation, safety precautions, technical specifications, and regulatory compliance. Learn how to use this advanced medical device for auscultation and ECG monitoring.
Preview Instrucciones de Uso CORE 500™ Estetoscopio Digital Eko
Guía completa de instrucciones de uso para el estetoscopio digital Eko CORE 500™. Aprenda sobre sus características, instalación, operación segura, y especificaciones técnicas para profesionales de la salud y usuarios no profesionales.