Strymon Volante магниттик жаңырык машинасынын колдонуу боюнча нускамасы

1. Киришүү

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2. Коопсуздук маалыматы

• Электр камсыздоо: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• Суу жана ным: Түзмөктү сууга же ашыкча нымдуулукка дуушар кылбаңыз. Бул электр тогуна урунууга же өрткө алып келиши мүмкүн.
• Вентиляция: Агрегаттын айланасын туура желдетүүнү камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Тазалоо: Агрегатты жумшак, кургак чүпүрөк менен тазалаңыз. Суюк тазалагычтарды же аэрозолдорду колдонбоңуз.
• Тейлөө: Агрегатты өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.

3. Пакеттин мазмуну

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• USB кабели
• Тез баштоо боюнча колдонмо (бул колдонмодо кеңири көрсөтмөлөр берилген)

4. Продукт бүтүп калдыview жана Controls

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

4.1-сүрөт: Жогорку view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

Жогорку панелдин башкаруу элементтери:

• REC LEVEL: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• LOW CUT: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• КИЙҮҮ: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TYPE которуштуруу: Selects between Drum, Tape, and Studio echo engines.
• SPEED которуштуруу: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• КАЙТАЛОО: Controls the number of echo repeats.
• ЭХО ДЕҢгээли: Adjusts the overall volume of the echo repeats.
• ЖАЗ: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

Бут өчүргүчтөр:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• Оң бут менен басуу баскычы (TAP): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

4.2-сүрөт: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

Арткы панелдин туташуулары:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• ЧЫГЫП КАЛГАН / ОҢ КАЛГАН: Stereo audio outputs.
• EXP: Expression pedal input for real-time control of parameters.
• USB: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI OUT: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Кошулган 9V DC кубат булагы үчүн кубат киргизүү.

5. Орнотуу

5.1 Кубат туташтыруу

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Connect the included 9V DC power supply to the 9VDC арткы панелдеги киргизүү.
3. Кубат булагын ылайыктуу дубал розеткасына сайыңыз.

5.2 Аудио байланыштар

The Volante supports both mono and stereo operation.

• Mono Setup: Аспабыңызды туташтырыңыз LEFT IN jack. Connect the КАЛДЫ джек сиздин ampкөтөргүч же кийинки педаль.
• Стерео орнотуу: Connect your stereo source (e.g., another stereo pedal, synth) to the LEFT IN жана RIGHT IN jacks. Connect the КАЛДЫ жана ТУУРА стереоңузга уячалар ampкөтөргүч орнотуу же аудио интерфейси.
• Киргизүү деңгээли: колдонуу INST/LINE switch to match your input signal level. Set to INST for guitar/bass, and LINE for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MIDI: Connect MIDI cables from your MIDI controller or interface to the MIDI IN жана MIDI OUT jacks for advanced control, preset changes, and synchronization.
• USB: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. Иштөө нускамалары

6.1 Негизги операция

1. Эффектти ишке киргизүү: басыңыз ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: колдонуу TYPE switch to choose between Drum, Tape, or Studio echo.
3. Кечиктирүү убактысын тууралоо: The delay time is primarily controlled by the TAP footswitch. Tap it two or more times to set the tempo. The ЫЛДАМ switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: бургула КАЙТАЛАЙТ knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: колдонуу ЭХО ДЕҢгээли knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: тууралаңыз ЖАЗ knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• REC LEVEL: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• LOW CUT: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• АРАЛЫК: The АРАЛЫК switch alters the rhythmic relationship between the four virtual playback heads.
  • Жада калса: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • Күмүш: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: кармаңыз TAP footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. Жаздыруу: The looper automatically starts recording when engaged. Play your phrase.
3. Overdub: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. Токтотуу/тазалоо: басыңыз ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. Тыныгуу: In Sound on Sound mode, hold the СҮЙҮКТҮҮ footswitch to pause the loop.
6. Splice: In Sound on Sound mode, hold the TAP footswitch to splice the loop, creating a new loop point.
7. Тескери: While the loop is playing, hold the ON footswitch to reverse the loop playback.

6.4 Алдын ала орнотуулар

The Volante allows you to save and recall your favorite settings.

• Алдын ала орнотууну сактоо: Once you have dialed in your desired sound, press and hold the СҮЙҮКТҮҮ footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• Алдын ала орнотууну кайра чакырып алуу: басыңыз СҮЙҮКТҮҮ footswitch to instantly recall your saved preset.
• Эскертүү: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. Өркүндөтүлгөн функциялар

7.1 Expression Pedal Control

Connect a standard expression pedal to the EXP jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• Программаны өзгөртүү (PC): Access up to 300 presets using MIDI Program Change messages.
• MIDI Clock Sync: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon webтолук маалымат алуу үчүн сайт.

8. Техникалык тейлөө

• Тазалоо: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Сактагыч: Колдонулбаган учурда педалды салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
• Программалык камсыздоонун жаңыртуулары: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. Кыйынчылыктарды

10. Техникалык шарттар

11. Кепилдик жана колдоо

11.1 Кепилдик маалыматы

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon webсайтка же кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

11.2 Кардарларды колдоо

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon webсайт.

Стримон Webсайт: www.strymon.net