VOLANTEXRC Phoenix2400 RC планёрдук учагы үчүн колдонмо

1. Продукт бүтүп калдыview

The VOLANTEXRC Phoenix2400 is a high-performance RC glider plane designed for both experienced pilots and those looking to advance their RC flying skills. This Plug-N-Play (PNP) version includes the airframe with pre-installed servos, brushless motor, and brushless Electronic Speed Controller (ESC). Please note that a radio transmitter, receiver, battery, and charger are камтылган эмес жана өзүнчө сатып алуу керек.

Image 1.1: The VOLANTEXRC Phoenix2400 RC Glider Plane.

Image 1.2: This PNP version does not include a remote, battery, or charger.

The Phoenix2400 features an innovative unibody plastic fuselage for durability and a 1.6-meter wingspan for excellent gliding performance. Preinstalled flaps enhance takeoff and landing, while folding propellers minimize drag during unpowered flight, extending flight times.

2. Коопсуздук маалыматы

Operating a remote control aircraft requires caution and adherence to safety guidelines to prevent injury or damage. This product is recommended for individuals aged 14 years and up.

2.1 Жалпы коопсуздук чаралары

• Always operate the aircraft in open areas, away from people, buildings, trees, and power lines.
• Катуу шамалда, жамгырда же башка жагымсыз аба ырайында учпаңыз.
• Ensure all control surfaces move freely and correctly before each flight.
• Always turn on your transmitter first, then connect the aircraft battery. Disconnect the aircraft battery first, then turn off your transmitter.
• Never attempt to catch a flying aircraft.
• Батарея туташтырылганда колдоруңузду жана кенен кийимдериңизди пропеллерден алыс кармаңыз.

2.2 Battery Safety (User-Supplied)

• Use only recommended LiPo batteries and chargers.
• LiPo батарейкаларын эч качан ашыкча заряддабаңыз же ашыкча разряддабаңыз.
• Store batteries in a fire-safe container and away from flammable materials.
• Inspect batteries for damage before each use. Discontinue use if damaged.

3. Пакеттин мазмуну

The VOLANTEXRC Phoenix2400 PNP package includes the following components:

• Phoenix2400 Airframe (Fuselage, Wings, Tail Sections)
• Pre-installed Brushless Motor (BL 2212/1400KV)
• Pre-installed Brushless ESC (30A)
• 4 x 9g Servos (pre-installed)
• Пропеллер жана спиннер
• Small parts and accessories for assembly

Items Required (Not Included):

• Radio Transmitter (minimum 4-channel recommended)
• Шайкеш кабыл алгыч
• LiPo Battery (e.g., 3S 1300-2200mAh)
• LiPo батарея заряддагыч

4. Чогултуу жана орнотуу

The Phoenix2400 is designed for quick and easy assembly. Follow these steps to prepare your glider for flight.

4.1 Wing Assembly

1. Carefully slide the left and right wing halves onto the fuselage.
2. Ensure the wing spars are properly seated within the fuselage and wing sections.
3. Secure the wings using the fast connecting wing clips or other provided mechanisms. The 'Plug & Click' system ensures a secure fit.

Image 4.1: The durable unibody plastic fuselage and easy wing mounting system.

4.2 Tail Assembly

1. Attach the horizontal stabilizer and vertical fin to the rear of the fuselage as per the diagrams.
2. Ensure control horns are correctly installed and pushrods are connected to the respective servos.

4.3 Receiver and Battery Installation

1. Open the canopy hatch on the fuselage.
2. Install your compatible receiver, connecting the servo leads (ailerons, elevator, rudder) and ESC lead to the correct channels. Refer to your receiver's manual for specific connections.
3. Place your charged LiPo battery into the battery compartment. Adjust its position to achieve the recommended Center of Gravity (CG). The CG marks are typically located under the wings.
4. Учуу учурунда кыймылдабоо үчүн батарейканы бекитиңиз.

Image 4.2: The Plug & Click Easy Mounting System simplifies wing attachment.

4.4 Control Surface Checks

1. With the transmitter on and aircraft battery connected, verify that all control surfaces (ailerons, elevator, rudder) respond correctly to your transmitter inputs.
2. Ensure the direction of movement is correct (e.g., pulling back on the elevator stick should cause the elevator to move up). Reverse channels on your transmitter if necessary.

5. Иштөө нускамалары

The Phoenix2400 is designed for smooth gliding and capable of basic aerobatics. Always perform pre-flight checks before each flight.

5.1 Учуу алдындагы текшерүү тизмеси

• Ensure transmitter and aircraft batteries are fully charged.
• Verify all control surfaces move freely and correctly.
• Check propeller for any damage.
• Confirm the Center of Gravity (CG) is within the recommended range.
• Бош туташууларды же компоненттерди текшериңиз.

5.2 Учуу

The Phoenix2400 can be hand-launched or launched from a smooth surface. For hand-launch, hold the fuselage firmly, apply full throttle, and gently push the aircraft forward and slightly upwards into the wind. The preinstalled flaps can provide added lift during takeoff.

Image 5.1: Preinstalled flaps provide additional lift for takeoff and landing.

5.3 Flight Characteristics

The Phoenix2400 is a stable glider, offering a relaxing flight experience. Its efficient design allows for extended flight times, especially when soaring. The folding propeller minimizes drag when the motor is off, enhancing gliding performance.

Image 5.2: Folding propellers reduce drag during gliding, increasing flight time.

The aircraft is also capable of performing various aerobatic maneuvers, including 360-degree rotations, once you are comfortable with its basic flight controls.

Image 5.3: The Phoenix2400 is capable of performing 360-degree aerobatic maneuvers.

5.4 конуу

Approach the landing area into the wind. Reduce throttle and gradually decrease altitude. Use the elevator for pitch control and ailerons/rudder for directional control. Gently flare just above the ground to achieve a smooth touchdown. The preinstalled flaps can assist in slowing the aircraft for a controlled descent.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your Phoenix2400 glider.

6.1 Учуудан кийинки текшерүү

• Inspect the airframe for any cracks, dents, or damage, especially after hard landings. The unibody plastic fuselage is designed to be crack-resistant.
• Check all control linkages and hinges for looseness or damage.
• Пропеллердин бекем бекитилгенин жана эч кандай зыян келтирилбегенин текшериңиз.
• Verify motor and ESC connections are secure.

6.2 Тазалоо жана сактоо

• Clean the aircraft with a soft, damp кездеме. Катуу химиялык заттарды колдонуудан алыс болуңуз.
• Учакты салкын, кургак жерде, күн нуру түз тийген жерлерден жана өтө жогорку температурадан алыс сактаңыз.
• If storing for an extended period, remove the battery from the aircraft.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your Phoenix2400 glider.

If you encounter issues not listed here, refer to the manuals for your specific radio transmitter, receiver, and battery charger, or contact VOLANTEXRC customer support.

8. Техникалык шарттар

Detailed specifications for the VOLANTEXRC Phoenix2400 RC Glider Plane:

• Модел: A742-7-PNP
• Канаттары: 1600мм (63.0 дюйм)
• Узундугу: 1160мм (45.7 дюйм)
• Учуу салмагы: 798г
• Кызматтар: 4 х 9г
• Мотор: BL 2212/1400KV Brushless Motor
• ESC: 30A щеткасыз ESC
• Fuselage Material: Durable Unibody Plastic
• Сунушталган жаш: 14 жаш жана андан жогору
• Өндүрүүчү: EXHOBBY LIMITTED

Image 8.1: Key dimensions of the Phoenix2400 glider.

9. Кепилдик жана колдоо

For warranty information, technical support, or replacement parts, please contact VOLANTEXRC customer service directly. Details can typically be found on the manufacturer's official webсайт же сатып алуу пункту аркылуу.

You can also visit the official VOLANTEXRC store for more products and information: VOLANTEXRC Store.