Metra Electronics 95-5703B Ford Mustang 1994-2000 кош DIN радиосун орнотуу комплектинин нускамасы

1. Продукт бүтүп калдыview

The Metra Electronics 95-5703B dash panel is engineered to facilitate the installation of an aftermarket 4-inch tall (Double-DIN) radio into the original dashboard of Ford Mustang vehicles manufactured between 1994 and 2000. This kit is designed to provide a seamless, factory-like fit and finish, allowing for an upgrade to your vehicle's audio system.

The dash panel is constructed from high-quality ABS plastic and features a scratch-resistant matte black finish to complement the vehicle's interior.

Камтылган компоненттер

• Double-DIN Dash Panel
• Radio Mounting Brackets
• Necessary Hardware Parts
• Detailed Installation Instructions (this manual)

Note: Wiring harnesses (70-1770, 70-5510 for amplified models) are sold separately and are required for radio connection. An antenna adapter is not required.

2. Орнотуу боюнча колдонмо

This section provides step-by-step instructions for installing the Metra 95-5703B dash kit and your aftermarket double-DIN radio.

Керектүү куралдар

• Панелди алып салуу куралы
• Бурагыч топтому (Phillips жана Flathead)
• Розетка ачкычтарынын топтому
• Wire Strippers/Crimpers (if installing wiring harness)
• Электрдик лента же жылуулук менен кичирейүүчү түтүк

Даярдоо

1. Батареяны ажыратыңыз: Before beginning any electrical work, disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
2. Remove Factory Radio and Dash Trim: Carefully remove the factory radio and surrounding dash trim panels. Refer to your vehicle's service manual for specific instructions on trim removal, as procedures may vary.
3. Remove Factory Brackets: Detach any factory radio mounting brackets from the original radio or dash opening.

Орнотуу кадамдары

1. Assemble Radio Brackets: Attach the provided Metra radio mounting brackets to your new aftermarket double-DIN radio. Ensure the radio is centered and flush with the front of the brackets. Use the screws supplied with your aftermarket radio or the Metra kit.
2. Integrate Radio into Dash Panel: Carefully slide the assembled radio and brackets into the opening of the Metra 95-5703B dash panel. Secure the radio to the dash panel using the provided hardware.
3. Зымдарды туташтыруу: Connect the aftermarket radio's wiring harness to the vehicle's wiring harness. If using a Metra wiring harness (sold separately), follow its specific instructions for connecting to the aftermarket radio and the vehicle's factory harness. Ensure all connections are secure and properly insulated.
4. Антенна туташуу: Connect the vehicle's antenna cable to the aftermarket radio. An antenna adapter is not required for this application.
5. Сыноо функциясы: Before fully reassembling the dash, reconnect the vehicle's battery and test the aftermarket radio's functionality (power, audio, balance, fader, radio reception, etc.).
6. Reassemble Dash: Once all functions are verified, carefully reinstall the Metra 95-5703B dash panel with the integrated radio into the vehicle's dashboard. Ensure all clips and screws are properly secured. Reinstall any other removed dash trim panels.
7. Акыркы текшерүү: Perform a final check to ensure all components are securely fastened and the dash appears as intended.

Сүрөт 1: Жарылып кеткен view of the Metra 95-5703B dash kit components, including the main dash panel and mounting brackets.

Сүрөт 2: Мисample of a double-DIN aftermarket radio installed in a Ford Mustang dashboard using the Metra 95-5703B kit, showing a clean, integrated appearance.

3. Операция

The Metra 95-5703B dash kit serves as a mounting solution for an aftermarket radio. The operation of your audio system will depend entirely on the specific features and controls of the aftermarket double-DIN radio you have installed. Please refer to the instruction manual provided with your aftermarket radio for detailed operational guidance.

4. Кароо жана тейлөө

To maintain the appearance of your Metra 95-5703B dash panel, wipe it periodically with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the panel is dry after cleaning.

5. Кыйынчылыктарды

• Радио күйбөй жатат:
  • Check all wiring connections, especially power and ground wires, to ensure they are secure.
  • Verify the vehicle's battery is properly reconnected and charged.
  • Inspect vehicle fuses and the radio's inline fuse.
• Poor Radio Fitment or Alignment:
  • Ensure the radio mounting brackets are correctly attached to the aftermarket radio and the dash panel.
  • Verify that no wires are pinched or obstructing the radio's seating within the dash opening.
  • Some aftermarket radios may require minor modifications to the dash opening or brackets for optimal fit.
• Vent Control Issues (Specific to some Mustang models):
  • For certain 1994-2000 Ford Mustang models, the original center air vents may require careful reinstallation or minor modification to ensure their control levers function correctly with the new dash panel. Ensure vent control knobs are properly aligned and secured.

6. Продукттун спецификациялары

7. Техникалык колдоо

For assistance with installation or any technical questions regarding your Metra product, a dedicated technical support team is available. Please refer to the contact information provided with your product packaging or visit the official Metra Electronics website for support details. Technical support is available 7 days a week.

8. Кепилдик маалыматы

Metra Electronics products are designed for quality and reliability. For specific warranty terms and conditions applicable to the 95-5703B dash kit, please refer to the warranty documentation included with your purchase or visit the official Metra Electronics webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.