1. Introduction and Overview
This manual provides essential instructions for the safe and effective use, setup, operation, and maintenance of the Graco 244076 Electronic Meter. This device is designed for accurate measurement of petroleum-based lubricants in liters, with a maximum working pressure of 1500 PSI.
Please read this manual thoroughly before installation or operation to ensure proper function and to prevent injury or damage to the equipment.
1-сүрөт: Фронт view of the Graco 244076 Electronic Meter, showing the digital display and "TOTAL" and "RESET" buttons. The meter is black with red lettering.
2. Коопсуздук маалыматы
Маанилүү коопсуздук көрсөтмөлөрү:
- Бул продукт үчүн арналган professional use only.
- менен гана колдонуңуз petroleum-based lubricants. Do not use with non-petroleum based lubricants or other fluids.
- Ар дайым ылайыктуу кийиңиз safety gear, including eye protection and gloves, when handling high-pressure liquids.
- Keep the meter away from heat sources and open flames.
- Иштөө алдында бардык туташуулардын коопсуз жана агып кетпегендигин текшериңиз.
- Dispose of contents and container in accordance with all local, state, and federal regulations.
- Do not exceed the maximum working pressure of 1500 PSI (10.3 MPa, 103 bar).
3. Продукттун өзгөчөлүктөрү жана компоненттери
3.1 Негизги өзгөчөлүктөрү
- Measures fluid volume in Liters.
- так окуу үчүн санариптик дисплей.
- Designed for use with petroleum-based lubricants.
- Maximum working pressure of 1500 PSI (10.3 MPa, 103 bar).
3.2 Камтылган компоненттер
- Graco 244076 Electronic Meter unit.
- Strainer Line (Part# 223179).
4. Орнотуу нускамалары
- Таңылганын ачуу: Carefully remove the electronic meter and all included components from the packaging. Inspect for any signs of damage.
- Connect Strainer Line: Attach the provided Strainer Line (Part# 223179) to the inlet port of the meter. Ensure a tight and secure connection to prevent leaks.
- Integrate into System: Connect the meter to your fluid dispensing system. The inlet should be connected to the lubricant source, and the outlet to the dispensing nozzle or hose. Use appropriate thread sealant if necessary.
- Байланыштарды текшерүү: Double-check all connections for tightness. Any loose connections can lead to leaks and inaccurate readings.
- Баштапкы кубаттоо: The meter is hand-powered, meaning it activates when fluid flows through it. No external power source is typically required for basic operation.
5. Иштөө нускамалары
- Агымды баштоо: Begin dispensing the petroleum-based lubricant through the system. The meter's display should activate and start counting the dispensed volume in liters.
- Өлчөөнү окуу: Observe the digital display to read the current dispensed volume. The display typically shows the "TOTAL" volume and a resettable "RESET" volume.
- Resetting the Meter: To reset the current measurement (e.g., for a new dispensing task), locate the "RESET" button on the meter (refer to Figure 1). Press and hold this button until the resettable display clears to zero. The "TOTAL" volume will continue to accumulate.
- Completing Dispensing: Once the desired volume has been dispensed, stop the fluid flow. The meter will retain the last measurement until reset or a new flow begins.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and accuracy of your Graco Electronic Meter.
- Тазалоо: Periodically wipe the exterior of the meter with a clean, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the display or housing.
- Strainer Inspection: Regularly inspect the Strainer Line (Part# 223179) for any debris or blockages. Clean or replace the strainer as needed to maintain proper flow and prevent damage to the meter.
- агып текшерүүлөр: Before each use, visually inspect all connections for any signs of leaks. Address any leaks immediately to prevent lubricant waste and potential hazards.
- Сактагыч: When not in use, store the meter in a clean, dry environment, away from extreme temperatures and direct sunlight.
7. Кыйынчылыктарды
This section addresses common issues you might encounter with your electronic meter.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Meter display does not activate or shows no reading. | No fluid flow; low battery (if applicable, though this model is hand-powered); internal blockage. | Ensure fluid is flowing through the meter. Check for blockages in the strainer or lines. If battery operated, check battery. |
| Туура эмес окуулар. | Air in the system; improper calibration (unlikely for this model); internal damage; strainer blockage. | Purge air from the system. Check and clean the strainer. Ensure the meter is installed correctly and securely. |
| Туташуулардан суюктук агып жатат. | Loose connections; damaged seals or O-rings. | Tighten all connections. Inspect and replace any damaged seals or O-rings. |
8. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | Graco |
| Модель номери | 244076 |
| Өлчөө системасы | Metric (Liters) |
| Максималдуу жумушчу басымы | 1500 PSI (10.3 MPa, 103 bar) |
| Сунушталган колдонуу | Petroleum-based lubricants only |
| Power Source | Hand Powered (Flow Activated) |
| Камтылган компоненттер | Electronic Meter, Strainer Line (Part# 223179) |
| Түс | Кара |
| UPC | 633955951075 |
9. Кепилдик жана колдоо
For information regarding warranty coverage, technical support, or to purchase replacement parts, please contact Graco customer service or visit the official Graco website. Keep your purchase receipt and product model number (244076) handy when contacting support.
Note: Specific warranty terms may vary by region and purchase date. Refer to the documentation provided at the time of purchase for detailed warranty information.
