Продукт бүттүview
This manual provides instructions for the Casfuy Replacement Dog Nail Grinder Wheel, designed to maintain the performance of your compatible Casfuy dog nail grinder. This replacement wheel is suitable for Casfuy models N10, N20, N30, N50, N60, and N65. It is not compatible with models N70, N75, or N90.
The grinding wheel is crafted with high-quality diamond grinding heads and premium brass shafts, ensuring efficient and durable performance. Its design facilitates easy replacement, allowing users to maintain optimal grinding effectiveness for their pet's nails.
Image: The Casfuy Replacement Dog Nail Grinder Wheel, featuring a diamond grinding head and a brass shaft, packaged for retail.
Image: A diagram illustrating the components of the Casfuy Diamond Bit Grinder, highlighting the diamond grinding head for fast and powerful grinding and the high-quality shaft.
Орнотуу жана орнотуу
Replacing the grinding wheel is a straightforward process. Follow these steps to install your new Casfuy Replacement Dog Nail Grinder Wheel:
- Step 1: Remove the Cover. Twist the black protective cover of your Casfuy nail grinder anticlockwise, then gently pull it off to expose the grinding head.
- Step 2: Remove the Old Grinding Head. Carefully pull the current grinding head straight out from the grinder. It should detach with moderate force.
- Step 3: Insert the New Grinding Head. Align the shaft of the new replacement grinding head with the opening in the grinder. Tuck the new head firmly into place until it is securely seated.
- Step 4: Replace the Cover. Twist the black protective cover back onto the grinder in a clockwise direction until it clicks securely into place.
Ensure the new grinding wheel is securely installed before operating the device.
Image: A four-step visual guide demonstrating how to replace the grinding head: 1) Twist off the black cover, 2) Pull out the old head, 3) Insert the new head firmly, 4) Twist the black cover back on.
Иштөө нускамалары
Once the replacement grinding wheel is installed, your Casfuy dog nail grinder is ready for use. Always ensure your pet is comfortable and calm before beginning the grooming process.
- Таанышуу: Allow your pet to get accustomed to the sound and vibration of the grinder before direct contact with their nails.
- Туура кармоо: Hold your pet's paw firmly and gently separate the toes to expose the nail.
- Майдалоо техникасы: Touch the grinding wheel to the tip of the nail, grinding in short bursts. Avoid grinding for too long in one spot to prevent heat buildup.
- Check the Quick: Be mindful of the quick (the sensitive part of the nail containing blood vessels and nerves) to avoid injury. For light-colored nails, the quick is visible as a pink area. For dark nails, grind in small increments until a small black dot appears in the center of the cut surface, indicating proximity to the quick.
- Suitable for Various Nails: This grinding wheel is effective on normal, thick, and long/curly dog nails, providing a smooth finish.
Image: A Casfuy nail grinder being used on a dog's paw, demonstrating its suitability for normal, thick, and long/curly nails.
Image: Before and after comparisons of dog paws, showing how the grinder effectively shortens and smooths nails.
Техникалык тейлөө
Proper maintenance of the grinding wheel ensures its longevity and continued effectiveness. After each use, it is recommended to clean the grinding wheel:
- Wipe the grinding wheel with a wet wipe or a damp кездеме.
- Thoroughly clean any nail dust or debris that may have accumulated on the grinding surface.
- This practice helps maintain the sharpness of the grinding wheel and prevents buildup that could hinder performance.
The replacement frequency of the grinding wheel depends on your actual usage. Typically, one grinding wheel is very durable with proper care.
Проблемаларды чечүү
If you encounter issues with your Casfuy Replacement Dog Nail Grinder Wheel, consider the following:
- Reduced Grinding Efficiency: Ensure the grinding wheel is clean and free of debris. Regular cleaning as per the maintenance section can restore efficiency. If the wheel is worn down after extensive use, it may be time for a new replacement.
- Wheel Not Spinning Properly: Verify that the grinding wheel is correctly and firmly seated in the grinder as per the installation steps. Check for any obstructions around the shaft.
- Адаттан тыш ызы-чуу/титирөө: This could indicate improper installation of the grinding head or a need for cleaning. Re-install the head and clean it thoroughly.
For persistent issues not resolved by these steps, please refer to the "Warranty and Support" section for further assistance.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Касфуй |
| Материал | High-quality diamond grinding heads, premium brass shafts |
| Шайкештик | Casfuy Models N10, N20, N30, N50, N60, N65 |
| Шайкеш келбеген моделдер | Casfuy Models N70, N75, N90 |
| Элемент Салмагы | Болжол менен 0.32 унция (0.02 фунт) |
| Пакеттин өлчөмдөрү | Болжол менен 3.78 x 2.91 x 0.43 дюйм |
| Бирдик саны | 1.0 Сан |
| UPC | 745103608110 |
Кепилдик жана колдоо
For specific warranty information regarding your Casfuy Replacement Dog Nail Grinder Wheel, please refer to the documentation included with your original Casfuy nail grinder or contact Casfuy Direct, the manufacturer.
For product support, technical assistance, or inquiries about replacement parts, you may contact Casfuy Direct directly. Their contact information can typically be found on the product packaging or their official webсайт.
This product is verified by Transparency, meaning each item has a unique code that is verified before shipping, ensuring authenticity.
