Jamo IW610SW

Jamo IW 610 SW In-Wall Subwoofer User Manual

Model: IW610SW

Introduction

Thank you for choosing the Jamo IW 610 SW In-Wall Subwoofer. This manual provides essential information for the proper installation, operation, and maintenance of your new subwoofer. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

The Jamo IW 610 SW is a high-performance 10-inch in-wall subwoofer designed to deliver dynamic, balanced, and distortion-free low frequencies. Its robust MDF enclosure ensures accurate and powerful bass while minimizing sound transfer to adjacent rooms. For enhanced acoustic performance, consider pairing it with the JDA-500 500W DSP amplifier, which offers specific EQ and limiter presets for this model.

Коопсуздук маалыматы

Ар дайым төмөнкү коопсуздук чараларын сактаңыз:

  • Орнотуудан жана колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
  • Бул колдонмону келечектеги маалымат үчүн сактаңыз.
  • Сабвуферди ашыкча нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
  • Ensure all wiring is correctly connected and insulated to prevent electrical hazards.
  • Installation should be performed by qualified personnel if you are unsure about electrical wiring or structural integrity.
  • Disconnect power to all audio components before making any connections.

Кутуда эмне бар

Таңгактан чыгарганда, бардык компоненттердин бар экендигин текшериңиз:

  • Jamo IW 610 SW In-Wall Subwoofer
  • Магниттик тор
  • Көрсөтмө (бул документ)

Орнотуу жана орнотуу

1. Planning the Installation Location

Choose a suitable location within a wall that can structurally support the subwoofer's weight and dimensions. Ensure there are no electrical wires, plumbing, or other obstructions behind the wall where you plan to install the unit. The subwoofer is designed for indoor use only.

Jamo IW 610 SW In-Wall Subwoofer with dimensions labeled

Figure 1: Subwoofer dimensions (4"D x 18"W x 22"H) for planning the installation cutout.

2. Wall Cutout and Mounting

Carefully mark the cutout area on the wall using the provided template (if included, or refer to the exact dimensions for a precise fit). Use a drywall saw or similar tool to make the cutout. Ensure the cutout is clean and precise.

Фронт view of Jamo IW 610 SW In-Wall Subwoofer without grille, showing the 10-inch woofer

Сүрөт 2: Алдыңкы view of the Jamo IW 610 SW, illustrating the woofer and mounting frame.

3. Зымдарды туташтыруу

Кандайдыр бир туташуулардан мурун, өзүңүздүн amplifier or receiver is turned off and unplugged. Run high-quality speaker wire from your amplifier's subwoofer output (or LFE output) to the Jamo IW 610 SW. The subwoofer features single binding posts for connection.

Side view of Jamo IW 610 SW In-Wall Subwoofer showing the rear terminal connections

3-сүрөт: Арткы view of the subwoofer showing the single binding posts for speaker wire connection.

Connect the positive (+) terminal from your amplifier to the red (+) terminal on the subwoofer, and the negative (-) terminal from your amplifier to the black (-) terminal on the subwoofer. Ensure a secure connection and no stray wire strands that could cause a short circuit.

4. Securing the Subwoofer

Once wired, carefully insert the subwoofer into the wall cutout. The mounting clamps (typically screw-activated) will swing out and clamp onto the drywall from behind as you tighten the screws on the front baffle. Tighten these screws evenly until the subwoofer is snug and flush with the wall surface. Do not overtighten.

Side view of Jamo IW 610 SW In-Wall Subwoofer with the white magnetic grille partially attached

Figure 4: Subwoofer with the magnetic grille partially attached, demonstrating the flush-mount design.

5. Торду бекитүү

The Jamo IW 610 SW comes with a paintable magnetic grille. Once the subwoofer is securely mounted, simply align the grille with the subwoofer frame; the magnets will hold it firmly in place.

Фронт view of Jamo IW 610 SW In-Wall Subwoofer with the white magnetic grille fully attached

Сүрөт 5: Алдыңкы view of the Jamo IW 610 SW with the magnetic grille fully attached, providing a clean, discreet appearance.

Иштөө нускамалары

After successful installation, connect your amplifier or receiver to a power source and turn it on. Adjust the subwoofer level and crossover frequency settings on your amplifier or AV receiver to blend seamlessly with your main speakers. Refer to your amplifier's manual for specific instructions on these settings.

For optimal performance, Jamo recommends using the JDA-500 500W DSP ampкөтөргүч. Бул amplifier includes specific EQ and limiter presets designed to maximize the acoustic output and performance of the IW 610 SW. Consult the JDA-500 amplifier's manual for details on applying these presets.

Техникалык тейлөө

The Jamo IW 610 SW requires minimal maintenance:

  • Тазалоо: Use a soft, dry cloth to wipe the grille and frame. Do not use harsh chemicals or abrasive cleaners.
  • Тор: The magnetic grille can be removed for cleaning or painting. Ensure it is reattached securely.
  • Текшерүү: Periodically check the mounting screws to ensure they remain snug.

Проблемаларды чечүү

If you experience issues with your Jamo IW 610 SW, refer to the following common problems and solutions:

  • Үн жок:
    • Check all cable connections between the subwoofer and amplifier. Ensure they are secure and correctly polarized (+ to + and - to -).
    • экендигин текшериңиз amplifier is powered on and the volume is not muted or set too low.
    • Confirm that the subwoofer output on your amplifier/receiver is enabled and configured correctly.
  • Бурмаланган үн:
    • Үн деңгээлин азайтыңыз ampкөтөргүч же кабыл алгыч.
    • Check for loose connections or damaged speaker wire.
    • Ensure the subwoofer is not overdriven. Adjust gain settings on your ampөмүрлүү.
  • Алсыз басс:
    • Increase the subwoofer level on your ampкөтөргүч/алуучу.
    • Adjust the crossover frequency setting on your amplifier/receiver. A lower crossover might be needed if your main speakers produce good bass, or higher if they are small.
    • Consider room acoustics. Subwoofer placement can significantly impact bass response.

If problems persist, consult a qualified audio technician.

Техникалык шарттар

ӨзгөчөлүкДеталь
Модель атыIW 610 SW
Динамик түрүСабвуфер
Сабвуфердин диаметри10 дюйм
Power Handling (RMS / Peak)200W RMS / 500W Чокусу
Frequency Response24Гц – 100Гц
Импеданс8 Ом
Максималдуу чыгаруу109дБ @ 70Hz
Төмөн жыштык айдоочусу254mm (10") Fiberglass
Короонун түрүSealed MDF Cabinet
КиргизүүлөрЖалгыз милдеттүү билдирүүлөр
Продукциянын өлчөмдөрү (Ж x В x D)22.0" H x 17.63" W x 4.0" D (559mm H x 448mm W x 102mm D)
Элемент Салмагы20.3 фунт (9.2 кг)
БүтүрүүMatte Black Polymer Veneer
ТүсКара
Монтаж түрүДубалга орнотуу
Ички/тышкы колдонууIndoor

Кепилдик жана колдоо

The Jamo IW 610 SW In-Wall Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Jamo webкепилдик камтуусу жана дооматтар боюнча толук шарттар жана эрежелер менен таанышуу үчүн сайтка кириңиз.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Jamo customer support through their official webсайт же сатып алуу документтери менен камсыз байланыш маалыматы.

Тектеш документтер - IW610SW

Preview Jamo A 3 сериясындагы динамиктери жана сабвуферлери: орнотуу, спецификациялар жана кепилдик
Jamo A 3 Сериясынын динамиктери жана сабвуферлери үчүн комплекстүү колдонмо, анын ичинде орнотуу нускамалары, техникалык мүнөздөмөлөр, тутумдун электр өткөргүч схемалары жана кепилдик маалыматы.
Preview Jamo 10/12 сабвуферин тез баштоо боюнча колдонмо
Jamo 10/12 Active Сабвуферин орнотуу жана туташтыруу боюнча кыскача колдонмо, анда негизги туташуулар, башкаруу элементтери жана коопсуздук көрсөтмөлөрү камтылган.
Preview Jamo SUB 210 менен иштеген сабвуферди тез баштоо боюнча колдонмо
Jamo SUB 210 сабвуферин тез баштоо боюнча колдонмо, анда оптималдуу орнотуу жана иштөө үчүн маанилүү коопсуздук көрсөтмөлөрү, туташуулар жана башкаруу элементтери камтылган.
Preview Jamo J10 SUB / J12 SUB менен иштеген сабвуфер колдонуучусунун колдонмосу
Jamo J10 SUB жана J12 SUB сабвуферлери үчүн колдонуучунун колдонмосу, анда коопсуздук боюнча көрсөтмөлөр, текшерүү, кам көрүү, жайгаштыруу, орнотуу, туташтыруу жана башкаруу элементтери камтылган. Бул колдонмо колдонуучуларга Jamo сабвуферлери менен аудио тажрыйбасын оптималдаштырууга жардам берет.
Preview Jamo SUB 210 сабвуферинин колдонуучу колдонмосу
Jamo SUB 210 сабвуферинин коопсуздук боюнча көрсөтмөлөрүн, орнотууларын, туташууларын, башкаруу элементтерин, жайгаштыруусун жана мүнөздөмөлөрүн камтыган кеңири колдонуучу колдонмосу.
Preview Jamo S 810 SUB & S 808 SUB Studio 8 Сериялар Колдонуучунун колдонмосу
Studio 8 сериясынан Jamo S 810 SUB жана S 808 SUB сабвуферлери үчүн колдонуучу колдонмосу. Орнотуу, жайгаштыруу, байланыштар жана башкаруу маалыматын камтыйт.