Fieldpiece SM380V SMAN Manifold User Manual

Introduction

The Fieldpiece SM380V is a three-port digital manifold with an integrated micron gauge, designed for HVAC/R professionals. This advanced tool replaces the SMAN300 series and offers enhanced features for accurate system diagnostics and servicing. It provides comprehensive data at a glance, streamlining workflows and ensuring reliable results.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Integrated Micron Gauge (3 Port)
• Wireless connectivity with a range of 350 feet
• Rugged construction for field use
• Data Logging capability (up to 9 jobs, 7 days continuous)
• Tightness Test function with temperature compensation
• Customizable settings for auto power off, backlight, and units of measurement

Сүрөт 1: Алдыңкы view of the Fieldpiece SM380V SMAN Manifold, displaying its digital screen, control buttons, and three ports at the bottom.

Коопсуздук маалыматы

Always read and understand all safety precautions before operating the Fieldpiece SM380V. Failure to follow these instructions may result in injury or damage to the device.

• Жеке коргонуу каражаттары: Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, when working with refrigerants and HVAC/R systems.
• Муздаткычты иштетүү: Handle refrigerants with extreme care. Refer to local regulations and industry standards for safe handling and disposal.
• басым коопсуздугу: Never exceed the maximum pressure ratings of the manifold or the system being tested. Ensure all connections are secure before applying pressure.
• Батареянын коопсуздугу: Use only the specified battery type (6 AA batteries). Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
• Экологиялык шарттар: Operate the device within its specified environmental limits. Avoid exposure to extreme temperatures, moisture, or corrosive substances.
• Тейлөө: Do not attempt to service the unit beyond routine maintenance. Refer all servicing to qualified personnel.

Кутуда эмне бар

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы бар экенин текшериңиз:

• Fieldpiece SM380V SMAN Manifold
• Micron gauge (integrated)
• 6 AA batteries (pre-installed or included separately)
• Колдонуучунун Колдонмосу (бул документ)

Жайгашуу

1. Батареяны орнотуу

The SM380V requires 6 AA batteries for operation. These are typically included. To install or replace batteries:

1. Locate the battery compartment on the rear of the manifold.
2. Батареянын капкагын ачыңыз.
3. Insert 6 AA batteries, ensuring correct polarity as indicated inside the compartment.
4. Батареянын капкагын бекем жабыңыз.

2. Баштапкы күйгүзүү

басыңыз КҮЧ button to turn on the manifold. The display will illuminate and show the default measurement screen.

3. Unit Selection (Optional)

To customize units of measurement (e.g., pressure, temperature):

1. басыңыз МЕНЮ баскычы.
2. Navigate to the "Units" or "Settings" option using the arrow buttons.
3. Басыңыз ENTER тандоо үчүн.
4. Adjust individual units as desired and confirm changes.

Иштөө нускамалары

1. Connecting to a System

The SM380V features three ports for connecting to HVAC/R systems:

• Low Side Port: Typically connected to the suction line.
• High Side Port: Typically connected to the liquid line.
• Кызмат порту: Used for vacuum, charging, or recovery.

Ensure all hoses are properly connected and tightened before opening valves or applying pressure.

2. Өлчөөлөрдү алуу

Once connected, the SM380V will display real-time pressure and temperature readings. Use the VIEW button to cycle through different display modes, such as superheat, subcooling, and micron readings.

The integrated micron gauge provides precise vacuum measurements, crucial for proper system evacuation.

3. Маалыматтарды каттоо

The SM380V can log up to 9 jobs internally, with continuous logging for up to 168 hours (7 days). To initiate data logging:

1. басыңыз МЕНЮ баскычы.
2. Select "Data Logging" and press ENTER.
3. Follow the on-screen prompts to start a new log or view existing logs.
4. Logged data can be downloaded via the USB port for further analysis.

4. Tightness Test

Perform a tightness test to check for leaks after repairs or installations:

1. басыңыз TEST TIGHTNESS баскычы.
2. The manifold will display the pressure differential over time and track the duration of the test.
3. The test is temperature compensated to avoid false positives, especially when using an SL temp probe.

5. Wireless Measurements

The SM380V can receive wireless measurements from compatible Fieldpiece probes (e.g., Joblink probes). Ensure wireless functionality is enabled on both the manifold and the probes. Refer to the specific probe's manual for pairing instructions.

Техникалык тейлөө

Тазалоо

Wipe the manifold with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the ports are free of debris before and after use.

Сактагыч

Store the SM380V in its protective case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.

Калибрлөө

Regular calibration ensures the accuracy of your SM380V. Refer to Fieldpiece's official website or contact customer support for recommended calibration intervals and procedures.

Проблемаларды чечүү

If the problem persists, contact Fieldpiece customer support for assistance.

Техникалык шарттар

Кепилдик жана колдоо

Fieldpiece products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Fieldpiece webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

For technical support, troubleshooting assistance, or service inquiries, please contact Fieldpiece customer support through their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

Note: This manual provides general instructions. Specific features and operations may vary slightly. Always refer to the latest information available from Fieldpiece.