TOPGREENER TDHS5 Humidity Sensor Switch User Manual
Model: TDHS5-N
Brand: TOPGREENER
Introduction
The TOPGREENER TDHS5 Humidity Sensor Switch is designed to automatically control your ventilation fan based on ambient humidity levels. This device is ideal for high-humidity environments such as bathrooms, laundry rooms, and basements, helping to prevent issues like mold, mildew, and paint peeling by ensuring proper ventilation. It features adjustable humidity sensitivity and a manual override for convenience.
Сүрөт 1: Алдыңкы view of the TOPGREENER TDHS5 Humidity Sensor Switch.
Продукт өзгөчөлүктөрү
- Automated Humidity Detection: Automatically turns the ventilation fan ON when humidity exceeds a preset level and OFF when it drops, eliminating excess moisture.
- Жөнгө салынуучу нымдуулук деңгээли: Offers three sensitivity settings (low, medium, high) to customize ventilation based on room needs.
- Кол менен күйгүзүү/өчүрүү: Allows for manual control of the fan, bypassing the humidity sensor when desired.
- Убакыт кечигүү: Features a 20-minute time delay for efficient operation.
- Нейтралдуу зым талап кылынат: Designed for installations requiring a neutral wire.
- UL тизмеси: Ensures safety and quality standards are met.
- LED көрсөткүчү: An LED light illuminates when the fan is in use.
Figure 2: Key components of the TDHS5 switch, including the humidity sensor and fan switch.
Орнотуу жана орнотуу
Маанилүү коопсуздук маалыматы: Installation should only be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring. Always turn off power at the circuit breaker before beginning any electrical work to prevent electric shock.
Зымдарга талаптар:
- Нейтралдуу зым: A neutral wire is required for the operation of this switch. This is typically found in newer homes.
- Тtage: 120VAC.
- Maximum Fan Load: 3А.
- Single-Pole Use Only: This switch is designed for single-pole applications.
Орнотуу кадамдары:
- Кубатты өчүрүү: Locate the circuit breaker controlling the fan circuit and turn it OFF. Verify power is off using a voltage сыноочу.
- Эски которгучту алып салуу: Carefully remove the existing wall plate and switch from the electrical box.
- Зымдарды аныктоо: Identify the Line (hot), Load (to fan), Neutral, and Ground wires. The TDHS5 requires a neutral wire.
- Wire the Switch: Connect the wires to the TDHS5 switch terminals according to the wiring diagram provided with the product packaging. Ensure all connections are secure.
- Которгучту орнотуу: Gently push the wired switch into the electrical box and secure it with screws.
- Дубал плитасын орнотуу: Жаңы дубал плитасын орнотуңуз.
- Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.
Figure 3: The TDHS5 switch installed, emphasizing the neutral wire requirement for compatibility, typically in newer homes.
Иштөө нускамалары
Автоматтык нымдуулукту башкаруу:
The TDHS5 switch will automatically activate the connected ventilation fan when it detects that the humidity level in the room exceeds the preset threshold. The fan will continue to run until the humidity drops below this level, after which it will turn off with a 20-minute time delay.
Figure 4: The TDHS5 switch in a bathroom, illustrating its use in high-humidity locations. The LED indicator lights up when the fan is active.
Adjusting Humidity Sensitivity (45%-80% range):
The switch offers three levels of humidity sensitivity: Low, Medium (default), and High. To change the setting:
- 1-кадам: Press and hold the fan button for 8 seconds until the fan indicator light illuminates. This indicates entry into the setting mode.
- 2-кадам: Press the fan button again to cycle through the modes:
- Press once for Low sensitivity.
- Press twice for Medium sensitivity (default).
- Press three times for High sensitivity.
- The selected setting will be saved automatically after a few seconds of inactivity.
Figure 5: Instructions for adjusting the humidity sensitivity levels (Low, Medium, High) on the TDHS5 switch.
Manual ON/OFF Operation:
To manually turn the fan ON or OFF, simply press the fan button. This will override the automatic humidity sensing until the next humidity cycle or manual intervention.
Figure 6: The TDHS5 switch installed in a laundry room, illustrating its function in detecting and managing humidity.
Техникалык тейлөө
The TOPGREENER TDHS5 Humidity Sensor Switch requires minimal maintenance. Keep the surface of the switch clean by wiping it with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the humidity sensor vents are not obstructed by dust or debris, as this can affect its accuracy.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Fan does not turn ON automatically. |
|
|
| Күйөрман тынымсыз иштейт. |
|
|
| Manual ON/OFF button does not work. |
|
|
Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | TDHS5 |
| Operating Voltage | 120 VAC |
| Учурдагы рейтинг | 3 Amps (Max Fan Load) |
| нымдуулук колому | 45% - 80% |
| Убакыт кечигүү | 20 мүнөт |
| Иштөө режими | ON-NONE-ON |
| Байланыш түрү | Адатта ачык |
| Туташтыргыч түрү | Бурама терминалдары |
| Circuit Type | 1 тараптуу (Бир уюлдуу) |
| Актуатор түрү | Push Button |
| Материал | Metal (Contact Material) |
| Сертификаттар | UL тизмеленген |
| Өлчөмдөрү (пакет) | 4.65 x 2.44 x 2.36 дюйм |
Кепилдик жана колдоо
The TOPGREENER TDHS5 Humidity Sensor Switch comes with a 1 жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик кадимки колдонуудагы материалдык жана жасалгалоодогу кемчиликтерди камтыйт.
For technical support, troubleshooting assistance, or warranty claims, please contact TOPGREENER customer service. Refer to the contact information provided on the product packaging or visit the official TOPGREENER webсайт.
Өндүрүүчү: Top Greener Inc
