ТазаView 9H Anti-Glare LCD Protective Film

1. Продукт бүтүп калдыview

АйкынView 9H Anti-Glare LCD Protective Film is designed to safeguard the screen of your Alpine PKG-M700SC Rear Vision system. This film provides robust protection against scratches and reduces glare from external light sources, enhancing screen visibility.

Негизги өзгөчөлүктөрү:

• High Hardness (9H): Offers superior scratch resistance, protecting the LCD screen from daily wear and tear.
• Жарыкка каршы: Minimizes reflections from sunlight and fluorescent lights, improving screen clarity.
• Bubble-Less Application: Utilizes a special silicone adhesive that allows air to escape naturally, preventing bubble formation during installation.
• Ийкемдүү жана бышык: Maintains thinness and flexibility while achieving high hardness, resisting easy breakage and scattering.

Image: Visual representation of the film's anti-glare, bubble-less, and 9H hardness properties.

2. Орнотуу боюнча колдонмо

Follow these steps carefully for optimal application of the protective film. Ensure you are in a dust-free environment.

1. Экранды тазалоо: Thoroughly clean the Alpine PKG-M700SC screen using a microfiber cloth to remove all dust, fingerprints, and smudges. Use a screen cleaning solution if necessary, ensuring the screen is completely dry before proceeding.
2. Peel Off Protective Layer (Part 1): Carefully peel back a small portion of the protective layer labeled "Part 1" from one corner of the film. Avoid touching the adhesive side.
3. Плёнканы тегиздөө: Align the exposed adhesive edge of the film with the edge of your device's screen. Ensure precise alignment with all cutouts (if any) and edges.
4. Плёнканы колдонуу: Slowly and steadily lower the rest of the film onto the screen, gradually peeling off the remaining "Part 1" protective layer. Use a squeegee or a soft card wrapped in a cloth to gently press down the film, working from the aligned edge outwards to prevent bubbles.
5. көбүкчөлөрдү алып салуу: If any small bubbles remain, gently push them towards the nearest edge using the squeegee or cloth-wrapped card. The special silicone adhesive is designed to minimize bubbles.
6. Remove Protective Layer (Part 2): Once the film is fully applied and free of bubbles, carefully peel off the top protective layer labeled "Part 2" (if present).

Маанилүү: If you encounter significant difficulties or fail during the application process, please refer to the "Warranty and Support" section for information on the free replacement service.

3. Иштөө нускамалары

Once correctly installed, the ClearView protective film operates passively. It provides continuous protection to your Alpine PKG-M700SC screen without requiring any user interaction. The anti-glare properties will reduce reflections, and the 9H hardness will guard against scratches.

4. Техникалык тейлөө

To maintain the clarity and effectiveness of your ClearView protective film, follow these simple cleaning guidelines:

• Жумшак тазалоо: Use a soft, lint-free microfiber cloth to gently wipe the surface of the film.
• Stubborn Smudges: For more persistent smudges or fingerprints, lightly dampen the microfiber cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals, abrasive materials, or excessive moisture.
• Курч объекттерден качыңыз: While the film is 9H hard, avoid intentionally scratching it with sharp objects to preserve its integrity.

5. Кыйынчылыктарды

If you encounter any issues during or after the film application, consider the following:

• көбүкчөлөр: Small bubbles often disappear within 24-48 hours as the adhesive settles. For larger bubbles, try gently lifting the nearest edge of the film and reapplying it slowly, pushing the bubble out with a squeegee.
• Dust Particles: If dust is trapped under the film, it may cause persistent bubbles. Carefully lift the nearest edge of the film and use a dust-removal sticker or tape to lift the dust particle. Reapply the film.
• Туура эмес тегиздөө: If the film is significantly misaligned, it can be carefully peeled off and reapplied. The special silicone adhesive allows for reapplication.

For application failures that cannot be resolved, please refer to the "Warranty and Support" section.

6. Техникалык шарттар

Сүрөт: кесилиши view detailing the layers of the protective film, including the hard coating, optical PET, and silicone adhesive.

7. Кепилдик жана колдоо

Free Replacement Service for Application Failures:

ТазаView offers a free replacement service if you encounter difficulties or fail during the film application process.

• If you send us the product you failed to apply, we will replace it with a new one only once.
• Customers are responsible for the return shipping costs of the failed product.
• This free replacement service is available only within Japan.

Image: Diagram illustrating the process of the free replacement service for application failures.

Өндүрүүчүнүн байланышы:

For further inquiries or support, please contact Mobilemart, the manufacturer of this product.