Truper 13499 PRES-1/3T Pressure Booster Pump User Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Truper 13499 PRES-1/3T 1/3 HP Pressure Booster Pump. Please read these instructions carefully before installation and use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Коопсуздук маалыматы

Ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Электр энергиясы насостун көлөмүнө дал келүүсүн текшериңизtage and frequency (127 V - 60 Hz).
• Кандайдыр бир тейлөө же орнотууну аткаруудан мурун электр энергиясын өчүрүңүз.
• Do not operate the pump with flammable liquids.
• Насосту нөл температурадан коргоңуз.
• Эгер ишенбесеңиз, орнотуу квалификациялуу адис тарабынан аткарылышы керек.
• Балдарды жана уруксатсыз адамдарды иштеп жаткан насостон алыс кармаңыз.

3. Продукциянын компоненттери

The Truper 13499 PRES-1/3T Pressure Booster Pump includes the main pump unit, an integrated pressure switch, and power cord with an on/off switch. Refer to the image below for a visual representation of the pump and its key components.

1-сүрөт: Truper 13499 PRES-1/3T Pressure Booster Pump. This image shows the complete pump assembly, including the orange motor housing, the dark gray pump body, brass fittings for water inlet and outlet, and the integrated flow switch with an arrow indicating water flow direction. The power cord with an inline on/off switch is also visible.

Негизги компоненттер:

• Насостун корпусу: Dark gray cast iron housing for the impeller and water channels.
• Мотор корпусу: Orange casing protecting the electric motor.
• Inlet/Outlet Fittings: Brass threaded connections for plumbing.
• Агымды которуу: Orange component with an arrow, detecting water flow to activate the pump.
• Электр кабели: Electrical connection with an integrated on/off switch.

4. Орнотуу жана орнотуу

Насостун туура орнотуусу анын иштеши жана узак мөөнөттүү иштеши үчүн абдан маанилүү.

1. Жайгашкан жери:
   • Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures.
   • Ensure the pump is placed on a stable, level surface to minimize vibration.
   • Allow adequate space around the pump for ventilation and maintenance access.
2. Сантехникалык байланыштар:
   • Connect the pump to the water supply line using appropriate plumbing fittings. Ensure all connections are watertight.
   • Observe the flow direction indicated by the arrow on the flow switch (Figure 1). The pump must be installed in line with the water flow.
   • Use flexible connectors to reduce vibration transmission to the plumbing system.
   • Install shut-off valves on both the inlet and outlet sides of the pump for easier maintenance.
3. Электр байланышы:
   • Ensure the power outlet is properly grounded and matches the pump's electrical requirements (127 V - 60 Hz).
   • Plug the pump's power cord into the grounded outlet.
   • Do not use extension cords unless absolutely necessary, and ensure they are rated for the pump's power requirements.
4. Насосту толтуруу:
   • Before initial operation, ensure the pump is filled with water to prevent dry running. Open a faucet downstream to allow air to escape.
   • Once water flows steadily from the faucet, close it. The pump is now primed.

5. Иштөө нускамалары

The Truper 13499 PRES-1/3T pump operates automatically based on water flow.

1. Алгачкы ишке киргизүү:
   • After installation and priming, ensure the inline switch on the power cord is in the "OFF" position.
   • Насосту ылайыктуу электр розеткасына сайыңыз.
   • Switch the inline power switch to the "ON" position. The pump will remain off until water flow is detected.
2. Автоматтык иштетүү:
   • When a water outlet (e.g., faucet, shower) is opened, the flow switch detects water movement.
   • The pump automatically starts, boosting water pressure.
   • When the water outlet is closed, the flow stops, and the pump automatically shuts off after a short delay.
3. Милдеттик цикл:
   • The pump is designed for intermittent use: 50 minutes of work followed by 20 minutes of rest.
   • The daily maximum operating time is 6 hours. Adhering to this duty cycle will prolong the pump's lifespan.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана насосуңуздун иштөө мөөнөтүн узартат.

• Тазалоо: Periodically clean the exterior of the pump to prevent dust and debris buildup. Do not use harsh chemicals.
• Байланыштары: Regularly check all plumbing and electrical connections for leaks or loose fittings. Tighten as necessary.
• Кыштоо: If the pump is installed in an area subject to freezing temperatures, it must be drained and disconnected during winter months to prevent damage.
• Текшерүү: Электр шнурунун бузулуу же эскирүү белгилерин текшериңиз. Керек болсо алмаштырыңыз.

Warning: Always disconnect the pump from the power supply before performing any maintenance.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your pressure booster pump.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation included with your purchase or contact Truper customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Truper webсайтына же алардын ыйгарым укуктуу тейлөө борборлоруна кайрылыңыз.