SEBSON HF Motion Detector Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON HF Motion Detector (Model 2_X_HF_CEIL_A). Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Сүрөт 1.1: Алдыңкы view of the SEBSON HF Motion Detector. This image shows the circular, white casing of the motion detector, designed for discreet ceiling surface mounting.

2. Коопсуздук нускамалары

• Орнотуу улуттук зымдарды орнотуу эрежелерине ылайык квалификациялуу электрик тарабынан аткарылышы керек.
• Disconnect power before installation or any maintenance.
• Do not exceed the maximum load capacity: 800W for incandescent lamps, 300W for LED or other energy-saving lamps.
• This device is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Ensure the mounting surface is stable and can support the device.
• Балдар жетпеген жерде сактаңыз.

3. Продукт бүтүп калдыview

The SEBSON HF Motion Detector utilizes high-frequency (HF) technology to detect movement within its coverage area. It is designed for ceiling surface mounting and offers adjustable settings for optimal performance in various indoor environments.

Негизги өзгөчөлүктөрү:

• High-Frequency Sensor: Detects movement through non-metallic objects like thin walls or doors.
• Кеңири камтуу: 360° detection angle with a range of 2 to 16 meters.
• Жөнгө салынуучу Орнотуулар: Time delay (10 seconds to 12 minutes), sensitivity (detection range), and ambient light threshold (3-2000 lux).
• LED шайкеш: Supports up to 300W for LED lamps and 800W for incandescent lamps.
• Компакт дизайн: Circular, white casing with dimensions of Ø100x22mm.

Сүрөт 3.1: Бүттүview of the motion detector highlighting its key specifications including detection range, LED compatibility, IP rating, time delay, lux range, and voltage.

4. Техникалык шарттар

Image 4.1: Technical drawing showing the dimensions of the motion detector: 100mm diameter and 22mm height.

5. Орнотуу (Орнотуу)

Маанилүү: Ensure the main power supply is switched off before commencing installation.

1. Жайгашкан жерди тандоо: Select a suitable indoor ceiling location for surface mounting. Avoid placing near heat sources, air conditioning vents, or areas with significant air movement, which can interfere with detection.
2. Зымдарды даярдоо: c ачasing of the motion detector. You will find terminals for Live (L), Neutral (N), and Switched Live (L').
3. Тоо базасы: Secure the base of the motion detector to the ceiling using appropriate screws and wall plugs. Ensure the cable entry points are aligned.
4. Зым байланыштары:
   • Connect the incoming Live wire to the 'L' terminal.
   • Connect the incoming Neutral wire to the 'N' terminal.
   • Connect the Live wire to your light fixture (load) to the 'L'' terminal.
   • Connect the Neutral wire from your light fixture (load) to the 'N' terminal (shared with incoming neutral).
   

   Сүрөт 5.1: Арткы view of the motion detector, illustrating the wiring terminals (L, N, L') and the three adjustable dials for TIME, SENS, and LUX settings.

5. Жабуу Casing: Once wiring is complete and secure, reattach the main body of the detector to its base.
6. Күчтү калыбына келтирүү: Switch on the main power supply. The detector will enter a warm-up period (typically 30-60 seconds) during which it may switch on and off randomly.

6. Operation and Settings Adjustment

The SEBSON HF Motion Detector features three adjustable dials to customize its operation:

• УБАКЫТ (Убакыттын кечигүүсү): Controls how long the connected light remains on after the last detected movement.
  • 10 секунддан 12 мүнөткө чейин жөнгө салынышы мүмкүн.
  • Turn clockwise to increase the time delay, counter-clockwise to decrease.
• SENS (сезгичтик/аныктоо диапазону): Adjusts the detection range of the HF sensor.
  • Adjustable from 2 meters to 16 meters.
  • Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
  • Consider the environment to avoid unwanted detections (e.g., through thin walls).
• LUX (Ambient Light Threshold): Determines the ambient light level at which the sensor will activate the connected light.
  • Adjustable from 3 lux (darkness) to 2000 lux (daylight).
  • Turn towards the sun icon for activation in brighter conditions (daylight).
  • Turn towards the moon icon for activation only in darker conditions (night).

Сүрөт 6.1: деталдуу view of the three rotary dials on the motion detector, labeled TIME, SENS, and LUX, used for fine-tuning operational parameters.

Image 6.2: A diagram showing the 360° detection pattern and adjustable range (2-16m) from a ceiling mount, along with visual representations of the LUX, SENS, and TIME adjustment dials.

7. Техникалык тейлөө

The SEBSON HF Motion Detector requires minimal maintenance. Follow these guidelines:

• Тазалоо: Gently wipe the surface of the detector with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
• Текшерүү: Мезгил-мезгили менен с-га кандайдыр бир көрүнүктүү зыян келтирилгенин текшерип туруңузasing or wiring. If any damage is found, disconnect power and consult a qualified electrician.
• Экологиялык шарттар: Ensure the operating environment remains within the specified indoor conditions (IP20).

8. Кыйынчылыктарды

9. Кепилдик жана колдоо

SEBSON products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official SEBSON website. If you encounter any issues or require technical assistance, please contact SEBSON customer support through their official channels.

Көбүрөөк маалымат алуу үчүн төмөнкүгө кириңиз: www.sebson.de