1. Коопсуздук маалыматы
Please read all safety warnings and instructions carefully before installing or servicing this electronic timer. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.
ЭСКЕРТҮҮ: Өрт же электр тогуна урунуу коркунучу
- Орнотуудан же тейлөөдөн мурун автоматтык өчүргүчтөгү(лар)дагы кубатты өчүрүңүз же өчүргүчтү(ларды) ажыратыңыз.
- Тейлөөдөн мурун жабдууну өчүрүү үчүн бирден ашык автоматтык өчүргүч же ажыратуучу өчүргүч талап кылынышы мүмкүн.
- Орнотуу жана/же зымдар улуттук жана жергиликтүү электр кодексинин талаптарына ылайык болушу керек.
- ЖЕЗ өткөргүчтөрдү ГАНА колдонуңуз.
- Do NOT remove the plastic insulator covering the terminals.
Note: This device includes multilingual safety warnings (English, French, Spanish) directly on the unit for user reference.
Зымдарды орнотуу боюнча көрсөтмөлөр: To wire, lift the terminal, remove the screw, and swing it aside. Replace the screw and the plastic insulator covering the terminal before powering on the unit.
2. Продукт бүтүп калдыview
The Intermatic ET2745C is a versatile electronic timer designed for precise control of electrical loads. It offers an easy-to-use interface while providing advanced scheduling capabilities for a wide range of applications.
Негизги өзгөчөлүктөрү:
- Иштөө режими: 7/365 Days (daily, weekly, or annual scheduling).
- Каналдардын саны: 4 independent channels for controlling multiple loads.
- Пландаштыруу: Up to 96 set points or events for detailed programming.
- Holiday Blocks: Up to 50 holiday blocks with independent scheduling capabilities.
- Кубаттын камдык көчүрмөсү: 100-hour supercapacitor eliminates the need for batteries, maintaining programming during power outages.
- Тtage Тандоо: Автоматтык киргизүү томtage selection from 120 to 277 VAC, 60 Hz.
- Override Функциясы: Additional mode of operation turns the ON/OFF buttons into 2-hour overrides.
1-сүрөт: Front panel of the Intermatic ET2745C Electronic Timer, showing the display, control buttons (MODE, DAY, ENTER/NEXT, ON/OFF, CLEAR MEM, CLEAR ENTRY), and safety warnings.
3. Орнотуу
Installation should only be performed by a qualified electrician in accordance with all national and local electrical codes.
Орнотуу кадамдары:
- Электр энергиясын өчүрүү: Before beginning any installation, ensure that power to the circuit is completely disconnected at the main circuit breaker or disconnect switch. Verify with a voltage сыноочу.
- Монтаждоо: Mount the timer securely in the desired location, ensuring it is protected from moisture and extreme temperatures.
- Зымдар: Connect the power supply and load wires to the appropriate terminals on the timer. Refer to the wiring diagram provided with the unit for specific connections. Ensure all connections are tight and secure. Use copper conductors only.
- изолятор: Do not remove the plastic insulator covering the terminals.
- Электр энергиясын калыбына келтирүү: Once wiring is complete and verified, restore power to the circuit.
4. Орнотуу жана программалоо
The ET2745C timer features an intuitive interface for setting the time, date, and programming events.
Баштапкы орнотуу:
- Күйгүзүү: After installation and power restoration, the display will illuminate.
- Учурдагы убакытты жана күндү коюу:
- басыңыз РЕЖИМ убакыт орнотуу режимине кирүү үчүн баскыч.
- колдонуу CLEAR ENTRY (+/-) саатты жана мүнөттү тууралоо үчүн баскычтар.
- басыңыз КҮН button to select the current day of the week.
- Басыңыз ENTER/NEXT to confirm and move to the next setting, or РЕЖИМ чыгуу.
Программалоо окуялары:
- Программа режимине кириңиз: басыңыз РЕЖИМ button repeatedly until 'PROG' or 'EVENT' appears on the display.
- Каналды тандоо: колдонуу КҮЙГҮЗҮҮ/ӨЧҮРҮҮ buttons (one for each channel) to select the channel you wish to program.
- Set ON/OFF Times:
- Басыңыз ENTER/NEXT to cycle through ON and OFF events for the selected channel.
- колдонуу CLEAR ENTRY (+/-) buttons to set the desired time for each event.
- колдонуу КҮН button to select the days of the week for the event to be active (e.g., Mon-Fri, Sat-Sun, or individual days).
- Сактоо жана чыгуу: Басыңыз ENTER/NEXT to save each event. Once all events are programmed, press РЕЖИМ программалоо режиминен чыгуу үчүн.
Holiday Blocks:
The timer allows for programming up to 50 holiday blocks. Refer to the detailed programming guide in the full manual for specific instructions on setting holiday schedules.
Эстутумду тазалоо:
To clear all programmed events, press the ТАЗАЛОО МЕМ button. Confirm the action if prompted by the display.
5. Иштөө нускамалары
Once programmed, the ET2745C timer will operate automatically according to your set schedule.
Кол менен жокко чыгаруу:
Each of the four КҮЙГҮЗҮҮ/ӨЧҮРҮҮ buttons can be used for a temporary 2-hour manual override. Pressing an КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button will toggle the corresponding channel's state (ON to OFF, or OFF to ON) for a 2-hour duration, after which it will revert to the programmed schedule.
Маалыматты көрсөтүү:
The display shows the current time, day, and the status of each channel. Indicators on the display will show which channels are currently active.
6. Техникалык тейлөө
The Intermatic ET2745C timer is designed for reliable, long-term operation with minimal maintenance.
- Тазалоо: Periodically wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Текшерүү: Annually inspect the wiring connections for tightness and signs of wear or damage. Ensure the unit is free from dust and debris.
- Суперконденсатор: The internal supercapacitor provides backup power for programming. It does not require user maintenance or replacement.
7. Кыйынчылыктарды
If you encounter issues with your ET2745C timer, refer to the following common troubleshooting steps:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Таймердин дисплейи бош. | Аппаратка кубат жок. | Check circuit breaker and wiring connections. Ensure power is restored. |
| Программалангандай жүктөө күйбөйт/өчпөйт. | Incorrect programming; manual override active; faulty wiring. | Review programming steps. Check if a manual override is active. Verify wiring connections. |
| Убакыт же дата туура эмес. | Time not set correctly after power loss (though supercapacitor should prevent this for 100 hours). | Reset the current time and day as per Section 4. |
| Timer makes clicking noises. | Ички релелердин нормалдуу иштеши. | This is typically normal during switching operations. If excessive or continuous, contact support. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support.
8. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Модель номери | ET2745C |
| Бренд | Intermatic |
| Тtage | 120 to 277 VAC, 60 Hz (Automatic Selection) |
| Ampөчүрүү | 30 Amps |
| Иштөө режими | 7/365 күн |
| Каналдардын саны | 4 |
| Set Points/Events | 96ге чейин |
| Holiday Blocks | 50ге чейин |
| Power Backup | 100 сааттык суперконденсатор |
| Материал | Металл |
| Продукциянын өлчөмдөрү | 7 x 7 x 7 дюйм |
| Элемент Салмагы | 2.7 фунт |
| UPC | 078275148178 |
9. Кепилдик жана колдоо
Intermatic products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Intermatic webсайт.
Кардарларды колдоо:
If you have any questions regarding the installation, operation, or troubleshooting of your Intermatic ET2745C Electronic Timer, please contact Intermatic customer support:
- Webсайт: www.intermatic.com
- Телефон: Refer to the Intermatic webучурдагы байланыш номерлери үчүн сайт.
