Intermatic ET2145CP Electronic Timer Instruction Manual

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic ET2145CP Electronic Timer. This device is designed for 24-hour and 365-day operation, capable of handling up to 30 Amps at 120 to 277Vac. Please read this manual thoroughly before installation and use to ensure safe and proper functionality.

2. Коопсуздук боюнча маанилүү маалымат

ЭСКЕРТҮҮ: Өрт же электр тогуна урунуу коркунучу

• Орнотуудан же тейлөөдөн мурун автоматтык өчүргүчтөгү(лар)дагы кубатты өчүрүңүз же өчүргүчтү(ларды) ажыратыңыз.
• Тейлөөдөн мурун жабдууну өчүрүү үчүн бирден ашык автоматтык өчүргүч же ажыратуучу өчүргүч талап кылынышы мүмкүн.
• Орнотуу жана/же зымдар улуттук жана жергиликтүү электр кодексинин талаптарына ылайык болушу керек.
• Колдонуу ЖЕЗ conductors ONLY.
• Do ЖОК remove the insulator covering the terminals.

3. Продукт бүтүп калдыview

The Intermatic ET2145CP Electronic Timer features a clear digital display and intuitive controls for programming. Key components include:

• Санариптик дисплей: Shows current time, date, and programming information.
• MODE баскычы: Used to cycle through different programming modes (e.g., time setting, event programming).
• ENTER/NEXT Button: Confirms selections and advances to the next setting.
• ON/OFF баскычтары: Used for manual override or to set ON/OFF times for programmed events.
• CLEAR MEM Button: Clears all programmed events or settings.
• CLEAR ENTRY Button: Программалоо учурунда учурдагы жазууну тазалайт.
• Өйдө/төмөн жебелер: Adjust values (time, date, event numbers).
• Терминал блогу: Электр зымдарын туташтыруу үчүн.

4. Орнотуу боюнча нускамалар

Follow these steps for proper installation of the Intermatic ET2145CP Electronic Timer:

1. Электр энергиясын өчүрүү: Before beginning any work, ensure all power to the circuit is disconnected at the main circuit breaker or disconnect switch. Verify with a voltage сыноочу.
2. Access Wiring Terminals: To access the wiring terminals, lift the plastic insulator covering the terminals. You may need to remove a screw and swing the insulator aside.
3. Зымдарды туташтыруу: Connect the electrical wiring to the appropriate terminals. Ensure all connections are secure and comply with local and national electrical codes. Use only copper conductors.
4. Secure Insulator: Once wiring is complete, replace the plastic insulator covering the terminals and secure it with the screw (if applicable).
5. Күчтү калыбына келтирүү: After ensuring all connections are correct and secure, restore power to the circuit.

5. Иштөө нускамалары

5.1. Баштапкы орнотуу: Убакытты жана датаны коюу

1. басыңыз РЕЖИМ button until the time/date setting option appears on the display.
2. колдонуу Өйдө/төмөн жебелер to adjust the current hour. Press ENTER/NEXT ырастоо үчүн.
3. Repeat for minutes, AM/PM (if applicable), year, month, and day.
4. Басыңыз РЕЖИМ орнотуу менюсунан чыгуу үчүн.

5.2. Programming ON/OFF Events

The timer supports multiple ON/OFF events. Refer to the display for available program slots.

1. басыңыз РЕЖИМ button until 'PROGRAM' or 'EVENT' mode is displayed.
2. колдонуу Өйдө/төмөн жебелер to select an event number (e.g., 1 ON, 1 OFF). Press ENTER/NEXT.
3. Set the desired ON time using the Өйдө/төмөн жебелер жана ENTER/NEXT.
4. Set the desired OFF time using the Өйдө/төмөн жебелер жана ENTER/NEXT.
5. Select the days of the week for this event to be active (e.g., Mon-Fri, Daily, Weekends). Press ENTER/NEXT.
6. Repeat for additional events as needed.
7. Басыңыз РЕЖИМ программалоодон чыгуу үчүн.

5.3. Кол менен өзгөртүү

To temporarily override the programmed schedule:

• Бирин басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ buttons to manually switch the output ON or OFF.
• The timer will typically revert to its programmed schedule at the next scheduled event.

5.4. Clearing Memory

To clear all programmed events or reset the timer:

• басып, кармап туруңуз ТАЗАЛОО МЕМ button for a few seconds until the display confirms memory clear.
• Же болбосо, колдонуңуз ТАЗА КИРҮҮ button to clear individual entries during programming.

6. Техникалык тейлөө

The Intermatic ET2145CP Electronic Timer requires minimal maintenance. Ensure the unit is kept clean and free from dust and debris. Do not attempt to open the casing or repair the internal components, as there are no user-serviceable parts inside. For cleaning, use a soft, dry cloth. Avoid abrasive cleaners or solvents.

7. Кыйынчылыктарды

If you encounter issues with your timer, consider the following common troubleshooting steps:

• Дисплей жок/кубат жок: Check the circuit breaker or fuse supplying power to the timer. Ensure all wiring connections are secure.
• Timer Not Switching: Verify that the programmed events are correctly set and enabled. Check if the manual override is active.
• Туура эмес убакыт/дата: Re-enter the correct time and date as per Section 5.1.
• Туруктуу жүрүм-турум: A power surge or interruption might cause erratic behavior. Try resetting the timer by pressing the ТАЗАЛОО МЕМ button (this will erase all programs, requiring re-programming).

If problems persist after attempting these steps, contact Intermatic customer support for assistance.

8. Техникалык шарттар

9. Кепилдик жана Кардарларды колдоо

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Intermatic website. For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Intermatic customer support directly. Contact details can typically be found on the manufacturer's webсайт же продукт таңгак.