Antec VSK10 Micro-ATX корпусунун колдонуучу колдонмосу

Introduction

This manual provides comprehensive instructions for the Antec VSK10 Micro-ATX computer case. Please read this manual carefully before installation to ensure proper setup and optimal performance of your system.

Продукт бүттүview

The Antec VSK10 is a Micro-ATX case designed for efficient system building, offering a balance of functionality and compact design. It supports Micro-ATX and ITX motherboards and provides various features for component installation and cooling.

Негизги өзгөчөлүктөрү:

• Motherboard Support: Up to Micro-ATX
• Cooling: Supports up to 4 x 140mm fans and 280mm radiator (front), 1 x 120mm fan (rear, included)
• Drive Bays: 2 x 3.5" HDD (compatible with 2 x 2.5" SSD), 2 x 2.5" SSD
• Кеңейтүү уячалары: 4
• Front I/O: 2 x USB 3.0 Ports
• Material: SPCC + Plastic

Сүрөттүн сүрөттөлүшү: Бурчтуу фронт view of the Antec VSK10 Micro-ATX computer case, showcasing its sleek black design and front panel.

Орнотуу жана орнотуу

This section details the steps required to install your components into the Antec VSK10 case. Ensure your system is powered off and unplugged before beginning installation.

1. Ишти даярдоо

Remove the side panels by unscrewing the thumbscrews located at the rear of the case. Gently slide the panels backward and lift them off. This provides access to the interior for component installation.

Сүрөттүн сүрөттөлүшү: Ички view of the Antec VSK10 Micro-ATX case, showing the motherboard tray, drive bays, and power supply shroud. Cable routing cutouts are visible.

2. Motherboard орнотуу

Align your Micro-ATX or ITX motherboard with the pre-installed standoffs inside the case. Carefully place the motherboard onto the standoffs and secure it using the provided screws. Ensure the I/O shield is installed in the rear opening before securing the motherboard.

3. Электр энергиясы менен жабдууну орнотуу

Install the power supply unit (PSU) into the dedicated compartment at the bottom rear of the case. Ensure the PSU fan faces the bottom ventilation opening for optimal airflow. Secure the PSU with screws from the rear of the case.

Сүрөттүн сүрөттөлүшү: Арткы сырткы view of the Antec VSK10 case, showing the I/O shield cutout, four expansion slots, the rear fan mount, and the power supply mounting area at the bottom.

4. Дискти орнотуу

The VSK10 case supports both 3.5" HDDs and 2.5" SSDs:

• 3.5" HDD / 2.5" SSD: Install drives into the removable drive cage located beneath the PSU shroud. Follow the instructions for your specific drive type to secure it within the cage.
• 2.5 дюймдук SSD: Dedicated mounting points are available on the motherboard tray for 2.5" SSDs. Secure these drives directly to the tray using screws.

5. Кеңейтүү картасын орнотуу

Remove the necessary expansion slot covers from the rear of the case corresponding to your expansion card (e.g., graphics card). Insert your expansion card into the motherboard's PCIe slot and secure it with a screw.

6. Желдеткичти жана Радиаторду орнотуу

The VSK10 offers flexible cooling options:

• Алдыңкы: Supports 2 x 140mm or 3 x 120mm intake fans, or a 280mm radiator.
• Арткы: Includes 1 x 120mm exhaust fan.
• Жогорку: Supports 2 x 120mm or 2 x 140mm fans.

Ensure fans are oriented correctly for optimal airflow (typically intake at the front, exhaust at the rear and top).

Сүрөттүн сүрөттөлүшү: Алдыңкы сырткы view of the Antec VSK10 case, featuring a brushed black finish and a side intake vent for airflow.

7. Кабелдик башкаруу

Utilize the cable routing cutouts and tie-down points located behind the motherboard tray to manage and organize your cables. Effective cable management improves airflow and the overall aesthetic of your build.

Иштөө нускамалары

Front Panel I / O

The front panel provides convenient access to essential ports and controls for your system.

• Кубат баскычы: Press to power on or power off the system.
• Калыбына келтирүү баскычы: Системаны кайра иштетүү үчүн басыңыз.
• USB 3.0 порттору (x2): Connect USB 3.0 compatible devices for high-speed data transfer.
• Аудио уячалары: Кулакчындарды жана микрофондорду туташтырыңыз.

Сүрөттүн сүрөттөлүшү: Бурчтуу view of the Antec VSK10 case, highlighting the top panel with front I/O ports including two USB 3.0 ports and audio jacks, alongside the power and reset buttons.

Техникалык тейлөө

Regular maintenance helps ensure the longevity and optimal performance of your PC components and the case itself.

• Чаң чыпкалары: The VSK10 includes dust filters to prevent dust buildup. Regularly clean these filters by removing and washing them with water, or by using compressed air. Ensure they are completely dry before reinstallation.
• Ички тазалоо: Periodically open the case and use compressed air to remove dust from internal components such as fans, heatsinks, and graphics cards. Avoid touching components directly.
• Кабель башкаруу текшерүү: Ensure cables remain neatly routed and do not obstruct airflow or interfere with fan operation.

Проблемаларды чечүү

This section addresses common issues you might encounter during or after system assembly.

• Система күйбөй жатат:
  • Бардык кубат туташууларын, анын ичинде розеткага туташкан кубат берүүчү түзүлүштү, энелик платага туташкан кубат берүүчү түзүлүштү (24-пиндүү жана CPU 8-пиндүү) жана алдыңкы панелдеги кубат берүүчү которгучтун колонкасын текшериңиз.
  • Ensure the PSU switch at the rear is in the 'ON' position.
• Дисплей чыгышы жок:
  • Verify that the monitor is connected to the graphics card (or motherboard integrated graphics, if applicable) and is powered on.
  • Reseat the graphics card and RAM modules firmly into their slots.
• Ашыкча ысып кетүү:
  • Ensure all case fans are spinning and oriented correctly for optimal airflow.
  • Clean dust filters and internal components to remove any dust buildup.
  • Verify the CPU cooler is properly seated and making good contact with the CPU.
• USB порттору иштебейт:
  • Check if the front panel USB 3.0 header is correctly connected to the corresponding header on the motherboard.

Техникалык шарттар

The following table details the technical specifications of the Antec VSK10 Micro-ATX Case.

Кепилдик жана колдоо

For detailed warranty information, terms, and conditions, please refer to the official Antec website or the warranty card included with your product. For technical support or further assistance, please visit the Antec support page or contact their customer service department. Keep your proof of purchase for any warranty claims.