Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Puig V-Tech Line Touring Windshield, model 1295F. This windshield is designed for specific Honda Forza models to enhance riding comfort and aerodynamics.
Please read these instructions thoroughly before proceeding with installation or use to ensure proper fitment and safe operation.
Коопсуздук маалыматы
- Орнотуу учурунда ар дайым тиешелүү жеке коргонуу шаймандарын кийиңиз.
- Кандайдыр бир ишти баштоодон мурун мотоциклдин туруктуу жана өчүрүлгөндүгүн текшериңиз.
- Эгерде сиз кандайдыр бир кадам боюнча күмөн санасаңыз, квалификациялуу механикке кайрылыңыз.
- Do not overtighten fasteners, as this may damage components.
- Regularly inspect the windshield and mounting hardware for security and wear.
Шайкештик
This Puig V-Tech Line Touring Windshield (Model 1295F) is compatible with the following motorcycle models:
- Honda Forza 125: 2015, 2016, 2017, 2018, 2019, 2020
- Honda Forza 300: 2018, 2019, 2020
Note: Compatibility is crucial for proper fitment and performance. Verify your motorcycle's make, model, and year before installation.
Орнотуу жана орнотуу
The installation process typically involves removing the original windshield and mounting the new Puig windshield using the provided hardware. Specific steps may vary slightly depending on your motorcycle's exact configuration.
Керектүү куралдар (камтылган эмес):
- Screwdriver set (Phillips and/or flathead, as needed)
- Hex ачкыч топтому (Аллен ачкычтары)
- Torque wrench (recommended for precise fastening)
- Беттерин коргоо үчүн жумшак кездеме
Орнотуу кадамдары:
- Мотоциклди даярдоо: Park the motorcycle on a stable, level surface. Turn off the engine and remove the key.
- Remove Original Windshield: Carefully locate and remove the screws or fasteners securing the original windshield to the motorcycle. Keep track of all original hardware.
- Position the Puig Windshield: Align the Puig V-Tech Line Touring Windshield with the mounting points on your motorcycle.
- Монтаждоочу жабдыктарды орнотуу: Use the provided Puig hardware (if applicable) or the original hardware (if instructed) to secure the new windshield. Start all fasteners by hand to avoid cross-threading.
- бекиткичтерди бекемдөө: Gradually tighten all fasteners evenly. If using a torque wrench, refer to your motorcycle's service manual for recommended torque specifications for windshield mounting bolts. Avoid overtightening.
- Акыркы текшерүү: Gently shake the windshield to ensure it is securely mounted and does not wobble. Check for any gaps or misalignments.
Image: Puig V-Tech Line Touring Windshield 1295F mounted on a Honda Forza motorcycle. This image illustrates the appearance of the dark smoked windshield after installation.
Иштетүү жана колдонуу
The Puig V-Tech Line Touring Windshield is designed to improve aerodynamic protection and riding comfort. Once installed, no specific operational steps are required beyond regular motorcycle operation.
- Өркүндөтүлгөн коргоо: The touring design offers increased wind and weather protection compared to standard windshields.
- Көрүнүш: The dark smoked tint provides a stylish appearance. Ensure visibility is not compromised, especially during low-light conditions.
Кароо жана тейлөө
Туура кам көрүү Puig алдыңкы айнегиңиздин иштөө мөөнөтүн узартат жана тунуктугун сактайт.
- Тазалоо: Clean the windshield regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic material.
- Кургатуу: Dry with a clean, soft microfiber cloth to prevent water spots and streaks.
- Текшерүү: Periodically check all mounting bolts and hardware for tightness. Vibrations from riding can sometimes loosen fasteners.
- тырышып алдын алуу: Avoid wiping the windshield when dry or with dirty cloths, as this can cause scratches.
Проблемаларды чечүү
If you encounter issues with your Puig V-Tech Line Touring Windshield, consider the following common solutions:
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Windshield wobbles or vibrates | Бош монтаж болттору | Бардык монтаждоо болтторун текшерип, бекем тартыңыз. |
| Excessive wind noise or buffeting | Incorrect installation or specific rider/motorcycle dynamics | Re-verify installation steps. Ensure all components are correctly aligned. Windshield performance can be subjective; minor adjustments to riding position may help. |
| Бетинде сызыктар же тумандуулук | Improper cleaning methods or abrasive contact | Тазалоо үчүн жумшак чүпүрөктөрдү жана жумшак самынды гана колдонуңуз. Кургак сүртүүдөн качыңыз. Майда чийиктерди атайын акрил лак менен жылтыратса болот. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел: | 1295F |
| Бренд: | puig |
| Материал: | Акрил |
| Түсү: | Dark Smoked |
| Элемент Салмагы: | 2.03 фунт (болжол менен 0.92 кг) |
| Продукциянын өлчөмдөрү: | 29.13 x 15.75 x 0.02 дюйм (болжол менен 74 x 40 x 0.05 см) |
| Элементтин калыңдыгы: | 4 миллиметр |
| Унаа тейлөө түрү: | Мотоцикл |
| Кызмат орду: | Фронт |
Кепилдик жана колдоо
For information regarding product warranty, returns, or technical support, please contact Puig directly or the authorized retailer from whom you purchased this product.
Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.
Өндүрүүчү: puig
Webсайт: www.puig.tv
